3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMH6624MFX
Texas Instruments · Precision Op Amps · SOT-23-5
LMH6624MFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the datasheet gives no pin-specific limit, and output swing and short-circuit current are specified in the electrical characteristics (for example ±4.9 V typical into 100 Ω at ±6 V supplies). |
| 2 | V- | power_in | Negative supply; operating supply voltage (V+ - V-) is ±2.25 V to ±6.3 V, and the absolute maximum supply voltage (V+ - V-) is 13.2 V. |
| 3 | +IN | input | Non-inverting input; input voltage must stay within V- - 0.5 V to V+ + 0.5 V, and the differential input is limited to ±1.2 V. |
| 4 | -IN | input | Inverting input; input voltage must stay within V- - 0.5 V to V+ + 0.5 V, and the differential input is limited to ±1.2 V. |
| 5 | V+ | power_in | Positive supply; operating supply voltage (V+ - V-) is ±2.25 V to ±6.3 V, and the absolute maximum supply voltage (V+ - V-) is 13.2 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (VS = ±2.5 V) | VOS | -0.75 | -0.25 | 0.75 | mV | VCM = 0 V | 5 |
| Input offset voltage over temperature (VS = ±2.5 V) | VOS | -0.95 | 0.95 | mV | -40°C ≤ TJ ≤ 125°C | 5 | |
| Input offset voltage average drift (VS = ±2.5 V) | -0.25 | 0.25 | μV/°C | VCM = 0 V | 5 | ||
| Input offset current (VS = ±2.5 V) | IOS | -1.5 | -0.05 | 1.5 | μA | VCM = 0 V | 5 |
| Input offset current over temperature (VS = ±2.5 V) | IOS | -2 | 2 | μA | -40°C ≤ TJ ≤ 125°C | 5 | |
| Input bias current (VS = ±2.5 V) | IB | 13 | 20 | μA | VCM = 0 V | 5 | |
| Input bias current over temperature (VS = ±2.5 V) | IB | 25 | μA | -40°C ≤ TJ ≤ 125°C | 5 | ||
| Common mode rejection ratio (VS = ±2.5 V) | CMRR | 87 | 90 | dB | Input referred, VCM = −0.5 to +1.9 V | 5 | |
| Common mode rejection ratio over temperature (VS = ±2.5 V) | CMRR | 85 | dB | Input referred, -40°C ≤ TJ ≤ 125°C, VCM = −0.5 to +1.75 V | 5 | ||
| Large signal voltage gain LMH6624 (VS = ±2.5 V) | AVOL | 75 | 79 | dB | RL = 100 Ω, VO = −1 V to +1 V | 6 | |
| Large signal voltage gain LMH6624 over temperature (VS = ±2.5 V) | AVOL | 70 | dB | RL = 100 Ω, VO = −1 V to +1 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Output swing (VS = ±2.5 V) | VO | 1.1 | 1.5 | V | RL = 100 Ω | 6 | |
| Output swing over temperature (VS = ±2.5 V) | VO | 1 | V | RL = 100 Ω, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Output swing no load (VS = ±2.5 V) | VO | 1.4 | 1.7 | V | No Load | 6 | |
| Output swing no load over temperature (VS = ±2.5 V) | VO | 1.25 | V | No Load, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Output short circuit current LMH6624 sourcing (VS = ±2.5 V) | ISC | 90 | 145 | mA | Sourcing to Ground, ΔVIN = 200 mV | 6 | |
| Output short circuit current LMH6624 sourcing over temperature (VS = ±2.5 V) | ISC | 75 | mA | Sourcing to Ground, ΔVIN = 200 mV, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Output short circuit current LMH6624 sinking (VS = ±2.5 V) | ISC | 90 | 145 | mA | Sinking to Ground, ΔVIN = −200 mV | 6 | |
| Output short circuit current LMH6624 sinking over temperature (VS = ±2.5 V) | ISC | 75 | mA | Sinking to Ground, ΔVIN = −200 mV, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Power supply rejection ratio (VS = ±2.5 V) | PSRR | 82 | 90 | dB | VS = ±2.0 V to ±3.0 V | 6 | |
| Power supply rejection ratio over temperature (VS = ±2.5 V) | PSRR | 80 | dB | VS = ±2.0 V to ±3.0 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Supply current per channel (VS = ±2.5 V) | IS | 11.4 | 16 | mA | No Load | 6 | |
| Supply current per channel over temperature (VS = ±2.5 V) | IS | 18 | mA | No Load, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Input offset voltage (VS = ±6 V) | VOS | -0.5 | 0.1 | 0.5 | mV | VCM = 0 V | 7 |
| Input offset voltage over temperature (VS = ±6 V) | VOS | -0.7 | 0.7 | mV | -40°C ≤ TJ ≤ 125°C | 7 | |
| Input offset voltage average drift (VS = ±6 V) | -0.2 | 0.2 | μV/°C | VCM = 0 V | 7 | ||
| Input offset current LMH6624 (VS = ±6 V) | IOS | -1.1 | 0.05 | 1.1 | μA | VCM = 0 V | 7 |
| Input offset current LMH6624 over temperature (VS = ±6 V) | IOS | -2.5 | 2.5 | μA | VCM = 0 V, -40°C ≤ TJ ≤ 125°C | 7 | |
| Input bias current (VS = ±6 V) | IB | 13 | 20 | μA | VCM = 0 V | 7 | |
| Input bias current over temperature (VS = ±6 V) | IB | 25 | μA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Common mode rejection ratio (VS = ±6 V) | CMRR | 90 | 95 | dB | Input referred, VCM = −4.5 to +5.25 V | 7 | |
| Common mode rejection ratio over temperature (VS = ±6 V) | CMRR | 87 | dB | Input referred, -40°C ≤ TJ ≤ 125°C, VCM = −4.5 to +5.0 V | 7 | ||
| Large signal voltage gain LMH6624 (VS = ±6 V) | AVOL | 77 | 81 | dB | RL = 100 Ω, VO = −3 V to +3 V | 8 | |
| Large signal voltage gain LMH6624 over temperature (VS = ±6 V) | AVOL | 72 | dB | RL = 100 Ω, VO = −3 V to +3 V, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Output swing LMH6624 (VS = ±6 V) | VO | 4.4 | 4.9 | V | RL = 100 Ω | 8 | |
| Output swing LMH6624 over temperature (VS = ±6 V) | VO | 4.3 | V | RL = 100 Ω, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Output swing LMH6624 no load (VS = ±6 V) | VO | 4.8 | 5.2 | V | No Load | 8 | |
| Output swing LMH6624 no load over temperature (VS = ±6 V) | VO | 4.65 | V | No Load, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Output short circuit current LMH6624 sourcing (VS = ±6 V) | ISC | 100 | 156 | mA | Sourcing to Ground, ΔVIN = 200 mV | 8 | |
| Output short circuit current LMH6624 sourcing over temperature (VS = ±6 V) | ISC | 85 | mA | Sourcing to Ground, ΔVIN = 200 mV, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Output short circuit current LMH6624 sinking (VS = ±6 V) | ISC | 100 | 156 | mA | Sinking to Ground, ΔVIN = −200 mV | 8 | |
| Output short circuit current LMH6624 sinking over temperature (VS = ±6 V) | ISC | 85 | mA | Sinking to Ground, ΔVIN = −200 mV, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Power supply rejection ratio (VS = ±6 V) | PSRR | 82 | 88 | dB | VS = ±5.4 V to ±6.6 V | 8 | |
| Power supply rejection ratio over temperature (VS = ±6 V) | PSRR | 80 | dB | VS = ±5.4 V to ±6.6 V, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Supply current per channel (VS = ±6 V) | IS | 12 | 16 | mA | No Load | 8 | |
| Supply current per channel over temperature (VS = ±6 V) | IS | 18 | mA | No Load, -40°C ≤ TJ ≤ 125°C | 8 | ||
| Differential input voltage | VIN | -1.2 | 1.2 | V | Differential | 4 | |
| Supply voltage (V+ - V-) | V+ - V- | 13.2 | V | 4 | |||
| Input current | -10 | 10 | mA | 4 | |||
| Soldering temperature, infrared or convection | 235 | °C | Infrared or convection (20 sec.) | 4 | |||
| Soldering temperature, wave | 260 | °C | Wave soldering (10 sec.) | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Operating supply voltage (V+ - V-) | V+ - V- | 2.25 | 6.3 | V | 4 | ||
| Junction-to-ambient thermal resistance, DBV (5-pin) | RθJA | 265 | °C/W | DBV package (5 pins), soldered directly onto PC board | 4 |
CAD (KiCad official)
- Symbol:
LMH6624MFX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmh6624mfx-etched.step/lmh6624mfx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6624mfx.step/lmh6624mfx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
90063de617ad4fb1, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).