Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32C092CBT6

STMicroelectronics · IC · LQFP-48(7x7)

STM32C092CBT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PC13 bidirectional 5 V-tolerant I/O (FT) with alternate functions TIM1_ETR and TIM1_BKIN and additional functions RTC_TS, RTC_OUT1 and WKUP2.
2 PC14-OSCX_IN bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) that serves as the LSE oscillator input (OSCX_IN), with alternate functions such as USART1_TX, I2C1_SDA and FDCAN1_TX.
3 PC15-OSCX_OUT bidirectional 5 V-tolerant I/O (FT) that serves as the LSE oscillator output (OSCX_OUT), with alternate functions OSC32_EN, OSC_EN, TIM1_ETR, TIM3_CH3 and TIM15_BKIN.
4 PF3 bidirectional 5 V-tolerant general-purpose I/O (FT) with no alternate function listed.
5 VREF+ power_in Analog reference voltage input for the ADC, with VREF+ between 2 V and VDD.
6 VDD/VDDA power_in Digital and analog supply for the device (VDD = VDDA = VDDIO1), 2.0 V to 3.6 V.
7 VSS/VSSA power_in Ground for the digital and analog supplies.
8 PF0-OSC_IN bidirectional 5 V-tolerant I/O (FT) that serves as the HSE 4 to 48 MHz oscillator input (OSC_IN), with alternate function TIM14_CH1.
9 PF1-OSC_OUT bidirectional 5 V-tolerant I/O (FT) that serves as the HSE oscillator output (OSC_OUT), with alternate functions OSC_EN and TIM15_CH1N.
10 PF2-NRST bidirectional Active-low reset pin with embedded weak pull-up (25 to 55 kΩ), usable as a GPIO (FT) with alternate functions MCO and TIM1_CH4.
11 PA0 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN0 and WKUP1 and alternate functions such as SPI2_SCK, USART2_CTS, TIM2_CH1 and USART1_TX.
12 PA1 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN1 and alternate functions such as SPI1_SCK/I2S1_CK, USART1_RX and TIM2_CH2.
13 PA2 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN2, WKUP4 and LSCO and alternate functions such as SPI1_MOSI/I2S1_SD and USART2_TX.
14 PA3 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN3 and alternate functions such as SPI2_MISO and USART2_RX.
15 PA4 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN4 and RTC_OUT2 and alternate functions such as SPI1_NSS/I2S1_WS and USART2_TX.
16 PA5 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN5 and alternate functions such as SPI1_SCK/I2S1_CK and USART2_RX.
17 PA6 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN6 and alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1 and I2C2_SDA.
18 PA7 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN7 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C2_SCL.
19 PB0 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN17 and alternate functions such as SPI1_NSS/I2S1_WS, TIM3_CH3, FDCAN1_RX and USART3_RX.
20 PB1 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN18 and alternate functions such as TIM14_CH1, TIM3_CH4, FDCAN1_TX and USART3_RTS/DE/CK.
21 PB2 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN19 and alternate functions USART1_RX, MCO2, SPI2_MISO and USART3_TX.
22 PB10 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN20 and alternate functions TIM2_CH3, USART3_TX, SPI2_SCK and I2C2_SCL.
23 PB11 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN21 and alternate functions SPI2_MOSI, TIM2_CH4, USART3_RX and I2C2_SDA.
24 PB12 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN22 and alternate functions SPI2_NSS, TIM1_BKIN2, TIM1_BKIN, FDCAN1_RX and TIM15_BKIN.
25 PB13 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_SCK, TIM1_CH1N, FDCAN1_TX, USART3_CTS/NSS and I2C2_SCL.
26 PB14 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS/DE/CK, TIM15_CH1 and I2C2_SDA.
27 PB15 bidirectional 5 V-tolerant I/O (FT) with additional function RTC_REFIN and alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2.
28 PA8 bidirectional 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN8 and alternate functions such as MCO, USART2_TX, TIM1_CH1, SPI2_NSS and MCO2.
29 PA9 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as MCO, USART1_TX, TIM1_CH2, I2C1_SCL and I2C2_SCL; PA9 and PA10 can be remapped in place of PA11 and PA12 via SYSCFG_CFGR1.
30 PC6 bidirectional 5 V-tolerant I/O (FT) with alternate functions TIM3_CH1 and TIM2_CH3.
31 PC7 bidirectional 5 V-tolerant I/O (FT) with alternate functions TIM3_CH2 and TIM2_CH4.
32 PA10 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI2_MOSI, USART1_RX, TIM1_CH3, I2C1_SDA and I2C2_SDA; can be remapped in place of PA12 via SYSCFG_CFGR1.
33 PA11 [PA9] bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, USART1_CTS/NSS, TIM1_CH4, FDCAN1_RX and I2C2_SCL; can be remapped to PA9.
34 PA12 [PA10] bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MOSI/I2S1_SD, USART1_RTS/DE/CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN and I2C2_SDA; can be remapped to PA10.
35 PA13 bidirectional 5 V-tolerant I/O with analog switch (FT_a) that is SWDIO at reset with internal pull-up active, with additional function ADC_IN13 and alternate functions IR_OUT, TIM3_ETR and USART2_RX.
36 PA14-BOOT0 bidirectional 5 V-tolerant I/O with analog switch (FT_a) that is SWCLK at reset with internal pull-down active, also serving as BOOT0, with additional function ADC_IN14.
37 PA15 bidirectional 5 V-tolerant I/O (FT) with alternate functions such as SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, TIM2_CH1/ETR and USART4_RTS/DE/CK.
38 PD0 bidirectional 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM16_CH1, SPI2_NSS and FDCAN1_RX.
39 PD1 bidirectional 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM17_CH1, SPI2_SCK and FDCAN1_TX.
40 PD2 bidirectional 5 V-tolerant I/O (FT) with alternate functions USART3_RTS/DE/CK, TIM3_ETR and TIM1_CH1N.
41 PD3 bidirectional 5 V-tolerant I/O (FT) with alternate functions USART2_CTS/NSS, TIM1_CH2N and SPI2_MISO.
42 PB3 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS/DE/CK and I2C2_SCL.
43 PB4 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS/NSS, TIM17_BKIN and I2C2_SDA.
44 PB5 bidirectional 5 V-tolerant I/O (FT) with additional function WKUP6 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN1_RX and I2C1_SMBA.
45 PB6 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with additional function WKUP3 and alternate functions such as USART1_TX, TIM1_CH3, I2C1_SCL, I2C1_SMBA and FDCAN1_TX.
46 PB7 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART1_RX, TIM1_CH4, SPI2_MOSI, USART4_CTS/NSS and I2C1_SDA.
47 PB8 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART3_TX, USART2_CTS/NSS, TIM16_CH1, SPI2_SCK, I2C1_SCL and FDCAN1_RX.
48 PB9 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as IR_OUT, USART2_RTS/DE/CK, TIM17_CH1, USART3_RX, SPI2_NSS, I2C1_SDA and FDCAN1_TX.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VDD -0.3 4 V 47
Voltage on VREF+ pin VREF+ -0.3 V 47
Input voltage on pin VIN -0.3 V 47
Current into VDD/VDDA power pin IVDD/VDDA 100 mA 47
Current out of VSS/VSSA ground pin IVSS/VSSA 100 mA 47
Output current sunk by any I/O and control pin IIO(PIN) 20 mA 47
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 47
Total output current sunk by sum of all I/Os and control pins ∑I(PIN) 80 mA 47
Total output current sourced by sum of all I/Os and control pins ∑I(PIN) 80 mA 47
Injected current on FT pin IINJ(PIN) -5 mA 47
Total injected current (sum of all I/Os and control pins) ∑IINJ(PIN) -25 mA 47
Storage temperature range TSTG -65 150 °C 47
Maximum junction temperature TJ 130 °C 47
Standard operating voltage VDD 2 3.6 V 48
I/O input voltage VIN -0.3 V 48
AHB clock frequency fHCLK 48 MHz 48
APB clock frequency fPCLK 48 MHz 48
Ambient temperature (suffix 6) TA -40 85 °C Suffix 6 48
Junction temperature (suffix 6) TJ -40 105 °C Suffix 6 48
VDD rise time rate tVDD 0 µs/V 48
VDD fall time rate tVDD 10 µs/V 48
POR temporization when VDD crosses VPOR tRSTTEMPO 270 500 µs VDD rising 48
Power-on reset threshold VPOR 1.9 1.94 1.98 V 48
Power-down reset threshold VPDR 1.88 1.92 1.96 V 49
Brownout reset threshold 1 (rising) VBOR1 2.05 2.1 2.18 V VDD rising 49
Brownout reset threshold 1 (falling) VBOR1 1.95 2 2.08 V VDD falling 49
Brownout reset threshold 2 (rising) VBOR2 2.2 2.31 2.38 V VDD rising 49
Brownout reset threshold 2 (falling) VBOR2 2.1 2.21 2.28 V VDD falling 49
Brownout reset threshold 3 (rising) VBOR3 2.5 2.62 2.68 V VDD rising 49
Brownout reset threshold 3 (falling) VBOR3 2.4 2.52 2.58 V VDD falling 49
Brownout reset threshold 4 (rising) VBOR4 2.8 2.91 3 V VDD rising 49
Brownout reset threshold 4 (falling) VBOR4 2.7 2.81 2.9 V VDD falling 49
ESD voltage, human body model VESD(HBM) 2000 V TA = +25 °C, ANSI/ESDA/JEDEC JS-001 class 2 71
Internal reference voltage VREFINT 1.182 1.212 1.232 V 49
ADC sampling time when reading internal reference voltage tS_vrefint 4 µs 49
Start time of reference voltage buffer when ADC is enabled tstart_vrefint 8 12 µs 49
Average temperature coefficient of VREFINT TCoeff 20 70 ppm/°C 49
Voltage coefficient of VREFINT VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 49
Long term stability of VREFINT ACoeff 300 1000 ppm 1000 hours, T = 25 °C 49
HSE oscillator frequency fOSC_IN 4 48 MHz 64
HSI48 frequency fHSI48 47.92 48.4 MHz VDD=3.0 V, TA=30 °C 66
HSI48 oscillator frequency drift over temperature and VDD ∆Temp(HSI) -1 1 % TA = 0 to 85 °C 66
HSI48 duty cycle DHSI48 45 55 % 66
HSI48 oscillator stabilization time tstab(HSI48) 1.5 3.6 µs at 1% of target frequency 66
HSI48 oscillator power consumption IDD(HSI48) 525 570 µA 66
LSI frequency fLSI 31.04 32 32.96 kHz VDD = 3.3 V, TA = 25 °C 67
Flash memory endurance NEND 10 kcycles TJ = -40 to +130 °C 68
Weak pull-up equivalent resistor (I/O) RPU 25 40 55 kΩ VIN = VSS 72
Weak pull-down equivalent resistor (I/O) RPD 25 40 55 kΩ VIN = VDDIO1 72
Input leakage current (I/O) Ilkg -70 70 nA 0 < VIN ≤ VDDIO1 72
NRST weak pull-up equivalent resistor RPU 25 40 55 kΩ VIN = VSS 76
NRST input filtered pulse VF(NRST) 70 ns 2.0 V < VDD < 3.6 V 76
NRST input not filtered pulse VNF(NRST) 350 ns 2.0 V < VDD < 3.6 V 76
Analog supply voltage VDDA 2 3.6 V 77
ADC total unadjusted error ET -6.5 6.5 LSB 2 V < VDDA = VREF+ < 3.6 V, fADC = 35 MHz, fs ≤ 2.5 Msps, TA = entire range 80
Supply current in Run mode from flash IDD(Run) 3.7 4.04 mA fHCLK 48 MHz, flash memory, TA = 85 °C 51
Supply current in Sleep mode IDD(Sleep) 0.845 1.27 mA fHCLK 48 MHz, flash enabled, all peripherals disabled, TA = 85 °C 55
Supply current in Stop mode IDD(Stop) 175 360 µA All clocks off, VDD = 3.6 V, TA = 85 °C 57
Supply current in Standby mode IDD(Standby) 9.6 11.7 µA All clocks off, VDD = 3.6 V, TA = 85 °C 58
Supply current in Shutdown mode IDD(Shutdown) 770 1600 nA All clocks off, VDD = 3.0 V, TA = 85 °C 58

CAD (KiCad official)

  • Symbol: STM32C092CBT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32c092cbt6-etched.step / stm32c092cbt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32c092cbt6.step / stm32c092cbt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (124 pp, sha256 1be32e8366076646, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF