3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3487EDD#TRPBF
Analog Devices · DC-DC Converters · DFN-10-EP(3x3)
LT3487EDD#TRPBF from Analog Devices, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CAP | passive | Disconnect-PNP emitter and positive Schottky cathode acting as the intermediate boost output, where the boost output capacitor connects. |
| 2 | SWP | passive | Switch pin and Schottky anode for the positive channel, where the boost inductor connects. |
| 3 | VBAT | power_in | Battery voltage pin that connects to the supply for the boost inductor and returns the disconnect drive current; the disconnect operates until CAP falls to 1.2V above VBAT. |
| 4 | SWN | passive | Switch pin for the negative (inverter) channel, where the inverter input inductor and flying capacitor connect. |
| 5 | DN | passive | Anode of the internal Schottky for the inverter, where the inverter output inductor and flying capacitor connect. |
| 6 | VIN | power_in | Input supply pin for the control circuitry (2.3V to 16V operating range) that must be locally bypassed with an X5R or X7R ceramic capacitor. |
| 7 | FBN | input | Feedback pin for the inverter, regulating at 0V with feedback resistor R2 = |
| 8 | RUN/SS | input | Run/soft-start pin driven by a 1.4µA source, pulled below 100mV to shut down, needing above 1.6V for full current, with a capacitor to ground setting soft-start and voltage kept below VIN. |
| 9 | FBP | input | Feedback pin for the boost that regulates at 1.23V, with feedback resistor R1 = (VPOS - 1.23V)/25µA connected from FBP to CAP. |
| 10 | VPOS | output | Boost channel output pin at the collector of the output disconnect PNP, where the boost load connects and capacitor C5 goes between CAP and VPOS for stability. |
| 11 | GND | power_in | Exposed pad ground, which must be connected to the PCB ground plane through multiple vias under the package for optimum thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-10-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VIN | 2.3 | 16 | V | 2 | ||
| FBP (Positive Channel) Pin Voltage | VFBP | 1.19 | 1.23 | 1.27 | V | full operating temperature range | 2 |
| FBN (Negative Channel) Pin Voltage | VFBN | -7 | 3 | 12 | mV | full operating temperature range | 2 |
| FBP Pin Bias Current | IFBP | 24.4 | 25 | 25.6 | µA | full operating temperature range | 2 |
| FBN Pin Bias Current | IFBN | 24.4 | 25 | 25.6 | µA | full operating temperature range | 2 |
| Switching Frequency | fSW | 1.85 | 2 | 2.15 | MHz | 2 | |
| Maximum Duty Cycle | DCmax | 87 | 93 | % | full operating temperature range | 2 | |
| Positive Channel Switch Current Limit | 750 | 920 | mA | Note 5, full operating temperature range | 2 | ||
| Negative Channel Switch Current Limit | 900 | 1090 | mA | Note 5, full operating temperature range | 2 | ||
| RUN/SS Pin Current | 1 | 1.4 | 2 | µA | RUN/SS = 0V (Note 4) | 2 | |
| Quiescent Current (not switching) | IQ | 3.7 | 5 | mA | RUN/SS = 3V, Not Switching | 2 | |
| Quiescent Current (shutdown) | IQ | 5.3 | 8 | µA | RUN/SS = 0V | 2 | |
| RUN/SS Voltage Threshold (Shutdown) | 100 | 160 | mV | full operating temperature range | 2 | ||
| FBP Threshold to Start Negative Channel | 87 | 90 | % | Percent of final value | 2 | ||
| Disconnect Current Limit | 100 | 155 | mA | VCAP = 15V, VPOS = 0V | 3 | ||
| VCAP, VBAT to Disconnect | 1.2 | 1.6 | V | VBAT = 3.6V, VPOS = 0V, ICAP < 100µA | 3 | ||
| Disconnect Leakage | 0.1 | 1 | µA | VBAT = 3.6V, CAP = 3.6V, VPOS = 0V | 3 | ||
| RUN/SS Voltage Threshold (Full Current) | 1.6 | V | Note 3 | 2 | |||
| FBP Pin Voltage Line Regulation | 0.007 | %/V | 2 | ||||
| FBN Pin Voltage Line Regulation | 0.001 | mV/V | 2 | ||||
| Positive Channel VCESAT | 280 | mV | ISWP = 400mA | 2 | |||
| Negative Channel VCESAT | 340 | mV | ISWN = 600mA | 2 | |||
| Schottky DP Forward Drop | 1045 | mV | ISWP = 400mA | 3 | |||
| Schottky DN Forward Drop | 980 | mV | ISWN = 600mA | 3 | |||
| Disconnect PNP VCE | 205 | mV | IVPOS = 50mA | 3 | |||
| VIN Voltage | VIN | 16 | V | 2 | |||
| VBAT Voltage | VBAT | 16 | V | 2 | |||
| SWP, SWN Voltage | 32 | V | 2 | ||||
| DN Voltage | -32 | V | 2 | ||||
| RUN/SS Voltage | 8 | V | 2 | ||||
| FBP Voltage | 6 | V | 2 | ||||
| FBN Voltage | -0.2 | 6 | V | 2 | |||
| Maximum Junction Temperature | TJ | 125 | °C | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | LT3487E guaranteed 0°C to 85°C (Note 2) | 2 | |
| Storage Temperature Range | Tstg | -65 | 125 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 43 | °C/W | 2 | |||
| Thermal Resistance Junction-to-Case | θJC | 3 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT3487EDD#TRPBF - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lt3487edd-trpbf-etched.step/lt3487edd-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3487edd-trpbf.step/lt3487edd-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
99c23a7fcb0ea6ad, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).