MCP6001AIDBVRG from HANSCHIP semiconductor, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VOUT	output	Amplifier output. Rail-to-rail output stage swings within a few mV of VSS and VDD with a 100 kOhm load; can source/sink about 75-84 mA (typ.) into a 10 Ohm load to VS/2.
2	VSS	power_in	Negative supply / ground. Absolute maximum -0.5 V to VDD; operating supply range (VDD-VSS) is 1.8 V to 6 V.
3	VIN+	input	Non-inverting analog input. High-impedance CMOS input (Ib ~1 pA typ.); common-mode range extends from VSS-0.1 V to VDD+0.1 V (rail-to-rail input).
4	VIN-	input	Inverting analog input. High-impedance CMOS input (Ib ~1 pA typ.); input offset voltage 0.8 mV typ., 3.5 mV max.
5	VDD	power_in	Positive supply. Operating range 1.8 V to 6 V (VDD-VSS); absolute maximum 7.5 V. Quiescent current 75 uA typ. per amplifier at 5 V.

Key specifications

Parameter	Value
Manufacturer	HANSCHIP semiconductor
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

Same part, different packaging or reel option.

MCP6001AIDBVRG
MCP6001AIDBVRGUDBVRG
MCP6001AIDBVRGRDBVRG
MCP6001AIDBVRGDCKRG

CAD (KiCad official)

Symbol: MCP6001AIDBVRG
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp6001aidbvrg.step`	85 KB	You want the bare part, or you mark your own boards.
`mcp6001aidbvrg-etched.step`	2.5 MB	You want the part with `MCP6001AIDBVRG` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 615 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: HANSCHIP semiconductor datasheet (14 pp, sha256 c4edb1ba02979bc5, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF