component
ASDMB-8.000MHZ-LY-T
Public Made by Adomby adom
Abracon LLC Programmable Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownASDMB-8.000MHZ-LY-T
Abracon LLC · Programmable Oscillators · SMD2520-4P
ASDMB-8.000MHZ-LY-T from Abracon LLC, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Standby | input | Tri-state/standby control: logic 1 (VIH >= 0.75Vdd) or open gives oscillation, logic 0 (VIL < 0.25Vdd) disables output to Hi-Z. |
| 2 | GND | power_in | Ground; a bypass capacitor of approximately 0.01uF is recommended between pin 2 and pin 4. |
| 3 | Output | output | Clock output, 1.0 to 150 MHz, rated for 15, 25 or 40 pF load depending on option. |
| 4 | VDD | power_in | Supply voltage, +1.8V to +3.3V (absolute maximum 4.0 V); bypass with approximately 0.01uF to pin 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Abracon LLC |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (Vdd) | Vdd | 1.8 | 3.3 | V | 1 | ||
| Frequency range | 1 | 150 | MHz | 1 | |||
| Operating temperature (L option) | -40 | 85 | °C | Part option L: -40°C ~ +85°C | 4 | ||
| Overall frequency stability (Y option) | -10 | 10 | ppm | Stability option Y: ±10ppm | 4 | ||
| Supply current (no load), 1.0 to 39.9999 MHz, Vdd = 1.8 V | IDD | 5 | 15 | mA | Vdd=1.8V; CL=0pF, RL=∞, T=25°C (standard CL 15pF) | 1 | |
| Supply current (no load), 1.0 to 39.9999 MHz, Vdd = 2.5 V | IDD | 6 | 15 | mA | Vdd=2.5V; CL=0pF, RL=∞, T=25°C (standard CL 15pF) | 2 | |
| Supply current (no load), 1.0 to 39.9999 MHz, Vdd = 3.3 V | IDD | 7 | 15 | mA | Vdd=3.3V; CL=0pF, RL=∞, T=25°C (standard CL 15pF) | 3 | |
| Output voltage high | VOH | 0.8 | *Vdd | Vdd=1.8V; CL=15, 25, 40pF | 1 | ||
| Output voltage low | VOL | 0.2 | *Vdd | Vdd=1.8V; CL=15, 25, 40pF | 1 | ||
| Output voltage high | VOH | 0.8 | *Vdd | Vdd=2.5V; CL=15, 25pF | 2 | ||
| Output voltage low | VOL | 0.2 | *Vdd | Vdd=2.5V; CL=15, 25pF | 2 | ||
| Output voltage high | VOH | 0.8 | *Vdd | Vdd=3.3V; CL=15pF | 3 | ||
| Output voltage low | VOL | 0.2 | *Vdd | Vdd=3.3V; CL=15pF | 3 | ||
| Rise time Tr, Vdd = 1.8 V | Tr | 1.8 | 3 | ns | Vdd=1.8V; CL=15pF; T=25°C; 20%/80% VDD | 1 | |
| Fall time Tf, Vdd = 1.8 V | Tf | 1 | 3 | ns | Vdd=1.8V; CL=15pF; 20%/80% VDD | 1 | |
| Rise time Tr, Vdd = 2.5 V | Tr | 1 | 2 | ns | Vdd=2.5V; CL=15pF; T=25°C; 20%/80% VDD | 2 | |
| Fall time Tf, Vdd = 2.5 V | Tf | 0.9 | 2 | ns | Vdd=2.5V; CL=15pF; 20%/80% VDD | 2 | |
| Rise time Tr, Vdd = 3.3 V | Tr | 1 | 2 | ns | Vdd=3.3V; CL=15pF; T=25°C; 20%/80% VDD | 3 | |
| Fall time Tf, Vdd = 3.3 V | Tf | 0.9 | 2 | ns | Vdd=3.3V; CL=15pF; 20%/80% VDD | 3 | |
| Cycle to cycle jitter, Vdd = 1.8 V | 60 | ps | Vdd=1.8V; F=100MHz | 1 | |||
| Cycle to cycle jitter, Vdd = 2.5 V | 50 | ps | Vdd=2.5V; F=100MHz | 2 | |||
| Cycle to cycle jitter, Vdd = 3.3 V | 50 | ps | Vdd=3.3V; F=100MHz | 3 | |||
| Period jitter RMS, Vdd = 1.8 V | 10 | ps | Vdd=1.8V; F=100MHz | 1 | |||
| Period jitter RMS, Vdd = 2.5 V | 5 | ps | Vdd=2.5V; F=100MHz | 2 | |||
| Period jitter RMS, Vdd = 3.3 V | 5 | ps | Vdd=3.3V; F=100MHz | 3 | |||
| Startup time | 1.5 | 3 | ms | 1 | |||
| Disable delay | 20 | 100 | ns | 1 | |||
| Disable stand-by current | 15 | uA | 1 | ||||
| Aging, first year | -0.5 | 0.5 | ppm | First year | 1 | ||
| Supply voltage | -0.3 | 4 | V | 4 | |||
| Input voltage | -0.3 | V | Maximum is Vdd+0.3 V as printed | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | -55 | 150 | °C | 4 | |||
| Soldering temperature | 260 | °C | 40 sec max | 4 | |||
| ESD HBM | 4000 | V | HBM | 4 | |||
| ESD MM | 200 | V | MM | 4 | |||
| ESD CDM | 1500 | V | CDM | 4 |
CAD (KiCad official)
- Symbol:
ASDMB-8.000MHZ-LY-T - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
asdmb-8-000mhz-ly-t-etched.step/asdmb-8-000mhz-ly-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);asdmb-8-000mhz-ly-t.step/asdmb-8-000mhz-ly-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Abracon LLC datasheet (5 pp, sha256
57c042720cca376c, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).