3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM2574HVN-15
Texas Instruments · DC-DC Converters · PDIP-8
LM2574HVN-15 from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback sense input; connect directly to the output capacitor for the fixed 15-V version (or to the midpoint of the feedback divider for ADJ). |
| 2 | SIG_GND | power_in | Signal ground, the ground reference for internal references and logic; connect to system ground. |
| 3 | ON/OFF | input | Enable input where High = OFF and low = ON; connect to GND to enable the regulator and do not leave the pin floating. |
| 4 | PWR_GND | power_in | Power ground; connect to system ground and the ground pins of CIN and COUT, keeping the path to CIN as short as possible. |
| 5 | VIN | power_in | Supply input to the collector of the high-side transistor; connect to the power supply and input bypass capacitor CIN with the shortest possible path to CIN and PWR_GND. |
| 6 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
| 7 | OUTPUT | output | Emitter of the power transistor and switching node; connect to the inductor and the cathode of the external diode. |
| 8 | NC | unconnected | No internal connection, but must be soldered to PCB for best heat transfer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (15-V HV, nominal test) | VOUT | 14.7 | 15 | 15.3 | V | VIN = 30 V, ILOAD = 100 mA | 6 |
| Output voltage (LM2574HV-15, TJ=25°C) | VOUT | 14.4 | 15 | 15.68 | V | LM2574HV, 18 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C | 6 |
| Output voltage (LM2574HV-15, full temp) | VOUT | 14.25 | 15.83 | V | LM2574HV, 18 V ≤ VIN ≤ 60 V, 0.1 A ≤ ILOAD ≤ 0.5 A, −40°C ≤ TJ ≤ 125°C | 6 | |
| Efficiency (15-V) | η | 88 | % | VIN = 18 V, ILOAD = 0.5 A | 6 | ||
| Feedback bias current | Ib | 50 | 100 | nA | Adjustable version only, VOUT = 5 V, TJ = 25°C | 5 | |
| Feedback bias current | Ib | 500 | nA | Adjustable version only, VOUT = 5 V, −40°C < TJ < 125°C | 5 | ||
| Oscillator frequency | fO | 47 | 52 | 58 | kHz | TJ = 25°C | 5 |
| Oscillator frequency | fO | 42 | 63 | kHz | −40°C < TJ < 125°C | 5 | |
| Saturation voltage | VSAT | 0.9 | 1.2 | V | IOUT = 0.5 A, TJ = 25°C | 5 | |
| Saturation voltage | VSAT | 1.4 | V | IOUT = 0.5 A, −40°C < TJ < 125°C | 5 | ||
| Maximum duty cycle (ON) | DC | 93 | 98 | % | Feedback pin removed from output and connected to 0 V | 5 | |
| Current limit | ICL | 0.7 | 1 | 1.6 | A | Peak current, TJ = 25°C | 5 |
| Current limit | ICL | 0.65 | 1.8 | A | Peak current, −40°C < TJ < 125°C | 5 | |
| Output leakage current | IL | 2 | mA | Output = 0 V | 5 | ||
| Output leakage current | IL | 7.5 | 30 | mA | Output = -1 V | 5 | |
| Quiescent current | IQ | 5 | 10 | mA | Feedback pin removed from output and connected to 25 V for 12-V and 15-V versions | 5 | |
| Standby quiescent current | ISTBY | 50 | 200 | μA | ON/OFF pin = 5 V (OFF) | 5 | |
| ON/OFF logic high input level | VIH | 2.2 | 1.4 | V | VOUT = 0 V, TJ = 25°C | 5 | |
| ON/OFF logic high input level | VIH | 2.4 | V | VOUT = 0 V, −40°C < TJ < 125°C | 5 | ||
| ON/OFF logic low input level | VIL | 1.2 | 1 | V | VOUT = Nominal output voltage, TJ = 25°C | 5 | |
| ON/OFF logic low input level | VIL | 0.8 | V | VOUT = Nominal output voltage, −40°C < TJ < 125°C | 5 | ||
| ON/OFF pin input current (OFF) | IH | 12 | 30 | μA | ON/OFF pin = 5 V (OFF) | 5 | |
| ON/OFF pin input current (ON) | IIL | 0 | 10 | μA | ON/OFF pin = 0 V (ON) | 5 | |
| Maximum supply voltage (LM2574HV) | 63 | V | LM2574HV | 4 | |||
| ON/OFF pin input voltage | -0.3 | V | Upper limit is VIN | 4 | |||
| Output voltage to ground, steady-state | -1 | V | 4 | ||||
| Lead temperature, soldering | 260 | °C | 10 s | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD, human-body model | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Supply voltage (LM2574HV) | 60 | V | LM2574HV | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 60.4 | °C/W | P (PDIP) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 59.9 | °C/W | P (PDIP) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 37.9 | °C/W | P (PDIP) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 17.1 | °C/W | P (PDIP) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 37.7 | °C/W | P (PDIP) 8 pins | 4 | ||
| Junction-to-copper thermal resistance | θj-cu | 42 | °C/W | P-8 package | 28 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The 8-pin molded PDIP and the 14-pin SOIC package have separate power and signal ground pins. Both ground pins must be soldered directly to wide printed-circuit board copper traces to assure low induc | 27 |
CAD (KiCad official)
- Symbol:
LM2574HVN-15 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2574hvn-15-etched.step/lm2574hvn-15-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2574hvn-15.step/lm2574hvn-15.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
fa435809361216e9, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).