3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC1044AIS8#TRPBF
Analog Devices · DC-DC Converters · SO-8
LTC1044AIS8#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOST | input | Connecting BOOST to V+ raises the internal oscillator frequency by about seven times, and it is left open for normal operation; the pin must stay within -0.3V to V+ + 0.3V (Note 2). |
| 2 | CAP+ | passive | Positive terminal of the external switching capacitor C1 (block diagram pin C+), which is typically 10µF and is not critical in matching, quality or tolerance. |
| 3 | GND | power_in | Ground reference pin; for V+ of 3V or more an internal switch shorts LV (pin 6) to this pin, and it is the output common in the battery splitter application. |
| 4 | CAP- | passive | Negative terminal of the external switching capacitor C1 (block diagram pin C-), connected to the internal switched-capacitor network. |
| 5 | VOUT | power_out | Converter output, which behaves as a nearly ideal voltage source in series with an approximately 80Ω output impedance in the negative voltage converter configuration. |
| 6 | LV | input | Low-voltage supply pin for the internal logic running between V+ and LV, which must be tied to GND for V+ below 3V and may be grounded or floated for V+ of 3V or more; current into this pin is limited to 20µA and its input voltage must stay within -0.3V to V+ + 0.3V. |
| 7 | OSC | input | Oscillator control pin where added capacitance lowers the switching frequency and an external clock can drive it (with the boost pin left open); its input must stay within -0.3V to V+ + 0.3V, and the internal oscillator can be disabled by tying it to GND or V+ to save power. |
| 8 | V+ | power_in | Positive supply input with a 1.5V minimum and 12V maximum operating range (13V absolute maximum), which also powers the internal logic relative to LV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (RL = ∞, Pins 1 and 7 No Connection) | IS | 60 | 200 | µA | RL = ∞, Pins 1 and 7, No Connection | 3 | |
| Minimum Supply Voltage | 1.5 | V | RL = 10k | 3 | |||
| Maximum Supply Voltage | 12 | V | RL = 10k | 3 | |||
| Output Resistance | ROUT | 100 | 325 | Ω | IL = 20mA, fOSC = 5kHz | 3 | |
| Oscillator Frequency | fOSC | 5 | kHz | V+ = 5V, (Note 3) | 3 | ||
| Oscillator Frequency | fOSC | 1 | kHz | V+ = 2V | 3 | ||
| Power Efficiency | PEFF | 95 | 98 | % | RL = 5k, fOSC = 5kHz | 3 | |
| Voltage Conversion Efficiency | 97 | 99.9 | % | RL = ∞ | 3 | ||
| Oscillator Sink or Source Current | 3 | µA | VOSC = 0V or V+, Pin 1 (BOOST) = 0V | 3 | |||
| Oscillator Sink or Source Current | 20 | µA | VOSC = 0V or V+, Pin 1 (BOOST) = V+ | 3 | |||
| Supply Current (V+ = 3V) | IS | 15 | µA | RL = ∞, Pins 1 and 7, No Connection, V+ = 3V | 3 | ||
| Output Resistance | ROUT | 130 | Ω | V+ = 2V, IL = 3mA, fOSC = 1kHz | 3 | ||
| Input Voltage on Pins 1, 6 and 7 | VIN | -0.3 | V | -0.3V < VIN < V+ + 0.3V (Note 2) | 2 | ||
| Current into Pin 6 | 20 | µA | 2 | ||||
| Operating Temperature Range (LTC1044AI) | -40 | 85 | °C | LTC1044AI | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec soldering | 2 | |||
| Maximum Junction Temperature | TJMAX | 110 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient (S8 package) | θJA | 130 | °C/W | S8 package (8-lead plastic SO) | 2 |
CAD (KiCad official)
- Symbol:
LTC1044AIS8#TRPBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
ltc1044ais8-trpbf-etched.step/ltc1044ais8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1044ais8-trpbf.step/ltc1044ais8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
eb83e86681673665, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).