Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ME6251C33M5G

MICRONE · Linear Voltage Regulators (LDO) · SOT-23-5

ME6251C33M5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage pin; the datasheet specifies an input voltage range of 1.2V to 5.5V.
2 VSS power_in Ground pin for the regulator.
3 CE input Enable pin; the output is enabled at 1.0V or above and disabled at 0.5V or below.
4 NC unconnected No connection (empty pin).
5 VOUT power_out Regulated output pin; supplies up to 500mA with an output voltage range of 1.0V to 5.0V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 6.5 V 3
Output current IOUT 600 mA 3
Package power dissipation SOT-23-5 PD 300 mW 3
Operating temperature Ta -40 85 ℃ 3
Storage temperature Tstg -40 125 ℃ 3
Operating current ISS 30 60 μA VIN=VOUT+1V 4
Shutdown current ICEL 0.1 1 μA VCE=0V 4
Reverse current IREV 0.01 1.5 μA VIN=0V,VOUT=6.0V 4
VOUT output leakage current IREVS 1.4 2.8 μA VIN=5.0V,VOUT=6.0V 4
Maximum output current IOUTMAX 500 mA VIN=VOUT+1V 4
Load regulation ΔVOUT 9 mV 1mA≤IOUT≤100mA 4
Dropout voltage VDIF1 120 mV IOUT=100mA 4
Dropout voltage VDIF2 260 mV IOUT=200mA 4
Line regulation ΔVOUT/(ΔVIN•VOUT) 0.05 %/V IOUT=30mA, VOUT+1V≤VIN≤6.5V 4
CE enable-on voltage VCEH 1 V 开启 (on) 4
CE enable-off voltage VCEL 0.5 V 关断 (off) 4
Power supply rejection ratio PSRR 70 dB VIN=VOUT(S)+1.0V, f=1.0kHz, △Vrip=0.5Vrms, IOUT=10mA 4
Short-circuit current ISHORT 50 mA 4

CAD (KiCad official)

  • Symbol: ME6251C33M5G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: me6251c33m5g-etched.step / me6251c33m5g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me6251c33m5g.step / me6251c33m5g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (7 pp, sha256 594f19aa7f0721d4, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF