component
RT9013-18GB-JSM
Public Made by Adomby adom
JSMSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRT9013-18GB-JSM
JSMSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RT9013-18GB-JSM from JSMSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the input voltage must not exceed 7.0 V in operation (absolute maximum 6 V per the limits table) and the datasheet recommends a 1 µF input capacitor. |
| 2 | GND | power_in | Ground terminal, the reference for VIN, VOUT and CE. |
| 3 | CE | input | Chip enable input (also called EN) that turns the regulator on or off; with Vce = 0 V the shutdown current is typically 1 µA. |
| 4 | NC | unconnected | No internal connection; the datasheet describes this pin as empty. |
| 5 | VOUT | power_out | Regulated output delivering up to 400 mA, with a 1 µF output capacitor shown in the typical application and output voltage limited to Vss-0.3 V to Vout+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
RT9013-18GB-JSM - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rt9013-18gb-jsm-etched.step/rt9013-18gb-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9013-18gb-jsm.step/rt9013-18gb-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (5 pp, sha256
e082d663a53b415a, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).