component
MCP6004-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6004-E
Microchip Tech · Operational Amplifier · PDIP-14
MCP6004-E from Microchip Tech, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output of op amp A; the output pins are low-impedance voltage sources. |
| 2 | VINA- | input | Inverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Noninverting input of op amp A; a high-impedance CMOS input with low bias current. |
| 4 | VDD | power_in | Positive power supply, 1.8V to 6.0V higher than VSS; VDD will need bypass capacitors. |
| 5 | VINB+ | input | Noninverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of op amp B; a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Analog output of op amp B; a low-impedance voltage source. |
| 8 | VOUTC | output | Analog output of op amp C; a low-impedance voltage source. |
| 9 | VINC- | input | Inverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 10 | VINC+ | input | Noninverting input of op amp C; a high-impedance CMOS input with low bias current. |
| 11 | VSS | power_in | Negative power supply; connected to ground for single-supply operation. |
| 12 | VIND+ | input | Noninverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 13 | VIND- | input | Inverting input of op amp D; a high-impedance CMOS input with low bias current. |
| 14 | VOUTD | output | Analog output of op amp D; a low-impedance voltage source. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4.5 | 4.5 | mV | VCM = VSS (Note 1) | 3 | |
| Common-Mode Input Range, printed VSS, 0.3 to VDD + 0.3 V (stored as offset from VSS and from VDD) | VCMR | -0.3 | 0.3 | V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | dB | VCM = -0.3V to 5.3V, VDD = 5V | 3 | |
| DC Open-Loop Gain (Large Signal) | AOL | 88 | 112 | dB | VOUT = 0.3V to VDD, 0.3V, VCM =VSS | 3 | |
| Maximum Output Voltage Swing (printed min VSS + 25 mV stored as +25; max VDD, 25 mV stored as -25) | VOL, VOH | 25 | -25 | mV | VDD = 5.5V, 0.5V input overdrive | 3 | |
| Quiescent Current per Amplifier | IQ | 50 | 100 | 170 | µA | IO = 0, VDD = 5.5V, VCM = 5V | 3 |
| Supply Voltage | VDD | 1.8 | 6 | V | Note 2 | 3 | |
| Industrial Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Extended Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Analog Inputs (VIN+, VIN-), printed VSS, 1.0V to VDD + 1.0V (stored as offset from rails) | VIN | -1 | 1 | V | 3 | ||
| All Other Inputs and Outputs, printed VSS, 0.3V to VDD + 0.3V (stored as offset from rails) | -0.3 | 0.3 | V | 3 | |||
| VDD, VSS | VDD-VSS | 7 | V | 3 | |||
| Current at Analog Input Pins (VIN+, VIN-) | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Input Offset Drift with Temperature (printed ±2.0) | VOS/TA | 2 | µV/°C | TA= -40°C to +125°C, VCM = VSS | 3 | ||
| Power Supply Rejection Ratio | PSRR | 86 | dB | VCM = VSS | 3 | ||
| Input Bias Current (printed ±1.0) | IB | 1 | pA | 3 | |||
| Input Bias Current, Industrial Temperature | IB | 19 | pA | TA = +85°C | 3 | ||
| Input Bias Current, Extended Temperature | IB | 1100 | pA | TA = +125°C | 3 | ||
| Input Offset Current (printed ±1.0) | IOS | 1 | pA | 3 | |||
| Output Short-Circuit Current (printed ±6) | ISC | 6 | mA | VDD = 1.8V | 3 | ||
| Output Short-Circuit Current (printed ±23) | ISC | 23 | mA | VDD = 5.5V | 3 | ||
| Gain Bandwidth Product | GBWP | 1 | MHz | 4 | |||
| Phase Margin | PM | 90 | ° | G = +1 V/V | 4 | ||
| Slew Rate | SR | 0.6 | V/µs | 4 | |||
| Input Noise Voltage | Eni | 6.1 | µVp-p | f = 0.1 Hz to 10 Hz | 4 | ||
| Input Noise Voltage Density | eni | 28 | nV/Hz | f = 1 kHz | 4 | ||
| Input Noise Current Density | ini | 0.6 | fA/Hz | f = 1 kHz | 4 | ||
| Thermal Resistance, 14-Lead PDIP | JA | 70 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 31 |
CAD (KiCad official)
- Symbol:
MCP6004-E - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
mcp6004-e-etched.step/mcp6004-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6004-e.step/mcp6004-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
a9b33cface59f4cd, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).