3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA597IDGKR
Texas Instruments · Operational Amplifier · VSSOP-8
INA597IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | 6-kΩ resistor to noninverting terminal of op amp; used as reference pin in G = ½ configuration and as positive input in G = 2 configuration. |
| 2 | -IN | input | 12-kΩ resistor to inverting terminal of op amp; used as negative input in G = ½ configuration and connected to output in G = 2 configuration. |
| 3 | +IN | input | 12-kΩ resistor to noninverting terminal of op amp; used as positive input in G = ½ configuration and as reference pin in G = 2 configuration. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from single supply 4.5 V to 36 V or dual supplies ±2.25 V to ±18 V. |
| 5 | SENSE | input | 6-kΩ resistor to inverting terminal of op amp; connected to output in G = ½ configuration and used as negative input in G = 2 configuration. |
| 6 | OUT | output | Amplifier output. |
| 7 | V+ | power_in | Positive (highest) power supply; the device operates from single supply 4.5 V to 36 V or dual supplies ±2.25 V to ±18 V. |
| 8 | NC | unconnected | No internal connection; can be left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single supply (V+) to (V-) | V± | 36 | V | Single supply, (V+) to (V-) | 4 | ||
| Supply voltage, dual supply (V+), (V-) | V± | 18 | V | Dual supply, (V+), (V-) | 4 | ||
| Input current | IIN | 10 | mA | 4 | |||
| Operating temperature | TA | -55 | 125 | °C | 4 | ||
| Junction temperature | TJ | -55 | 125 | °C | 4 | ||
| Storage temperature | Tstg | 150 | °C | 4 | |||
| Supply voltage, single supply | V± | 4.5 | 36 | V | Single supply, VS = (V+) to (V-) | 4 | |
| Supply voltage, dual supply | V± | 2.25 | 18 | V | Dual supply, VS = (V+), (V-); printed as ±2.25 V and ±18 V | 4 | |
| Specified temperature | TA | -40 | 125 | °C | Specified temperature | 4 | |
| Input offset voltage (RTO), G = 1/2, VS = ±2.25 V to ±3 V | VOS | 14 | 200 | µV | G = 1/2, RTO, TA = 25°C, VS = ±2.25 V to ±3 V, VCM = -3 V | 5 | |
| Input offset voltage (RTO), G = 1/2, VS = ±3 V to ±18 V | VOS | 14 | 200 | µV | G = 1/2, RTO, TA = 25°C, VS = ±3 V to ±18 V, VCM = VS / 2 | 5 | |
| Input offset voltage drift, G = 1/2 | dVOS/dT | 0.7 | 5 | µV/°C | 5 | ||
| Power-supply rejection ratio, G = 1/2 | PSRR | 0.5 | 5 | µV/V | VS = ±3 V to ±18 V | 5 | |
| Common-mode rejection ratio, G = 1/2, low VCM range, TA = 25°C | CMRR | 88 | 100 | dB | RTO, 3[(V−), 0.1 V] ≤ VCM ≤ 3[(V+), 3 V], TA = 25°C | 5 | |
| Common-mode rejection ratio, G = 1/2, low VCM range, TA = -40°C to +125°C | CMRR | 82 | 90 | dB | RTO, 3[(V−), 0.1 V] ≤ VCM ≤ 3[(V+), 3 V], TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio, G = 1/2, high VCM range, TA = 25°C | CMRR | 88 | 100 | dB | RTO, 3[(V+), 1.5 V] ≤ VCM ≤ 3[(V+)], TA = 25°C | 5 | |
| Common-mode rejection ratio, G = 1/2, high VCM range, TA = -40°C to +125°C | CMRR | 72 | 90 | dB | RTO, 3[(V+), 1.5 V] ≤ VCM ≤ 3[(V+)], TA = -40°C to +125°C | 5 | |
| Gain error, G = 1/2 | GE | 0.01 | 0.03 | % | VOUT = -10 V to +10 V, VS = ±15 V | 5 | |
| Gain error drift, G = 1/2 | 0.2 | 0.5 | ppm/°C | 5 | |||
| Output voltage swing, positive rail, G = 1/2 | VO | 170 | 220 | mV | 5 | ||
| Output voltage swing, negative rail, G = 1/2 | VO | 190 | 220 | mV | 5 | ||
| Quiescent current, G = 1/2, TA = 25°C | IQ | 1.1 | 1.2 | mA | IOUT = 0 mA, TA = 25°C | 6 | |
| Quiescent current, G = 1/2, TA = -40°C to +125°C | IQ | 1.5 | mA | IOUT = 0 mA, TA = -40°C to +125°C | 6 | ||
| Input offset voltage (RTO), G = 2, VS = ±2.25 V to ±3 V | VOS | 28 | 400 | µV | G = 2, RTO, TA = 25°C, VS = ±2.25 V to ±3 V, VCM = -1.5 V | 6 | |
| Input offset voltage (RTO), G = 2, VS = ±3 V to ±18 V | VOS | 28 | 400 | µV | G = 2, RTO, TA = 25°C, VS = ±3 V to ±18 V, VCM = VS / 2 | 6 | |
| Input offset voltage drift, G = 2 | dVOS/dT | 1.4 | 10 | µV/°C | 6 | ||
| Power-supply rejection ratio, G = 2 | PSRR | 1 | 5 | µV/V | VS = ±2.25 V to ±18 V | 6 | |
| Common-mode rejection ratio, G = 2, low VCM range, TA = 25°C | CMRR | 82 | 94 | dB | RTO, 1.5[(V−), 0.1 V] ≤ VCM ≤ 1.5[(V+), 3 V], TA = 25°C | 6 | |
| Common-mode rejection ratio, G = 2, low VCM range, TA = -40°C to +125°C | CMRR | 80 | 84 | dB | RTO, 1.5[(V−), 0.1 V] ≤ VCM ≤ 1.5[(V+), 3 V], TA = -40°C to +125°C | 6 | |
| Common-mode rejection ratio, G = 2, high VCM range, TA = 25°C | CMRR | 82 | 94 | dB | RTO, 1.5[(V+), 1.5 V] ≤ VCM ≤ 1.5[(V+)], TA = 25°C | 6 | |
| Common-mode rejection ratio, G = 2, high VCM range, TA = -40°C to +125°C | CMRR | 65 | 84 | dB | RTO, 1.5[(V+), 1.5 V] ≤ VCM ≤ 1.5[(V+)], TA = -40°C to +125°C | 6 | |
| Gain error, G = 2 | GE | 0.01 | 0.03 | % | VOUT = -10 V to +10 V, VS = ±15 V | 6 | |
| Gain error drift, G = 2 | 0.25 | 0.5 | ppm/°C | 6 | |||
| Output voltage swing, positive rail, G = 2 | VO | 130 | 180 | mV | 6 | ||
| Output voltage swing, negative rail, G = 2 | VO | 140 | 180 | mV | 6 | ||
| Quiescent current, G = 2, TA = 25°C | IQ | 1.1 | 1.2 | mA | IOUT = 0 mA, TA = 25°C | 7 | |
| Quiescent current, G = 2, TA = -40°C to +125°C | IQ | 1.5 | mA | IOUT = 0 mA, TA = -40°C to +125°C | 7 | ||
| Junction-to-ambient thermal resistance (DGK) | RθJA | 115 | °C/W | DGK (8-pin VSSOP) package | 4 | ||
| Junction-to-case (top) thermal resistance (DGK) | RθJC(top) | 52.4 | °C/W | DGK (8-pin VSSOP) package | 4 | ||
| Junction-to-board thermal resistance (DGK) | RθJB | 59.2 | °C/W | DGK (8-pin VSSOP) package | 4 | ||
| Junction-to-top characterization parameter (DGK) | ψJT | 9.5 | °C/W | DGK (8-pin VSSOP) package | 4 | ||
| Junction-to-board characterization parameter (DGK) | ψJB | 58.3 | °C/W | DGK (8-pin VSSOP) package | 4 |
CAD (KiCad official)
- Symbol:
INA597IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina597idgkr-etched.step/ina597idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina597idgkr.step/ina597idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
b3aa514a17ef1706, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).