component
RS3236-ADJ8YF5
Public Made by Adomby adom
Jiangsu RUNIC Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS3236-ADJ8YF5
Jiangsu RUNIC Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RS3236-ADJ8YF5 from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input; supply voltage can range from 1.7V to 7.5V, bypass with a 1μF capacitor to GND. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable input; a logic low reduces the supply current to 10nA, connect to IN for normal operation. |
| 4 | FB | input | Feedback pin (adjustable voltage version only) used to set the output voltage of the device, with VFB = 0.81V for RS3236-ADJ8. |
| 5 | OUT | power_out | Regulator output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 1.7 | 7.5 | V | +25°C | 7 | |
| Feedback voltage (ADJ8 variant) | VFB | 0.79 | 0.81 | 0.83 | V | IOUT = 0.1 mA, RS3236-ADJ8, +25°C | 7 |
| Current limit | ILIM | 500 | 800 | mA | +25°C | 7 | |
| EN input threshold high (VIH), VIN = 1.7V | VIH | 1.4 | V | VIN = 1.7V, Full (-40°C to +85°C) | 7 | ||
| EN input threshold low (VIL), VIN = 1.7V | VIL | 0.4 | V | VIN = 1.7V, Full (-40°C to +85°C) | 7 | ||
| EN input threshold high (VIH), VIN = 7.5V | VIH | 2.3 | V | VIN = 7.5V, Full (-40°C to +85°C) | 7 | ||
| EN input threshold low (VIL), VIN = 7.5V | VIL | 0.8 | V | VIN = 7.5V, Full (-40°C to +85°C) | 7 | ||
| Ground pin current | IQ | 15 | 20 | µA | No load, +25°C | 7 | |
| Line regulation | ΔVLNR | 0.1 | 0.2 | %/V | VIN = (VOUT + 0.5V) to 7.5V, IOUT = 1mA, +25°C | 7 | |
| Load regulation | ΔVOUT | 25 | 50 | mV | IOUT = 0.1mA to 500mA, COUT = 1µF, +25°C | 7 | |
| EN input bias current high | IBH | 0.01 | 1 | µA | EN = 7.5V, +25°C | 7 | |
| Shutdown supply current | IQ(SHDN) | 0.01 | 1 | µA | EN = 0V, Full (-40°C to +85°C) | 7 | |
| Input voltage | VIN | -0.3 | 8 | V | 6 | ||
| Enable input voltage | VEN | -0.3 | V | Maximum printed as VIN | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Electrostatic discharge, human-body model (HBM) | V(ESD) | -6000 | 6000 | V | HBM | 6 | |
| Electrostatic discharge, machine model (MM) | V(ESD) | -400 | 400 | V | MM | 6 | |
| Input supply voltage | VIN | 1.7 | 7.5 | V | 6 | ||
| Enable input voltage | VEN | 0 | V | Maximum printed as VIN | 6 | ||
| Output current | IOUT | 0 | 500 | mA | 6 | ||
| Junction temperature | TJ | -40 | 85 | °C | 6 | ||
| Output voltage noise | en | 80 | µ VRMS | f = 10Hz to 100kHz, CBP = 0.01µF, COUT = 10µF, IOUT=30mA, +25°C | 7 | ||
| Output voltage temperature coefficient | ΔVOUT ΔTA × VOUT | 35 | ppm/℃ | ILOAD = 0.1mA, Full (-40°C to +85°C) | 7 | ||
| Power supply rejection ratio | PSRR | 72 | dB | CBP = 0μF, ILOAD = 30mA, COUT = 1μF, VIN = VOUT+1V, ΔVRIPPLE=0.2VP-P, f = 217Hz, +25°C | 7 | ||
| Power supply rejection ratio | PSRR | 70 | dB | CBP = 0μF, ILOAD = 30mA, COUT = 1μF, VIN = VOUT+1V, ΔVRIPPLE=0.2VP-P, f = 1kHz, +25°C | 7 | ||
| Power supply rejection ratio | PSRR | 74 | dB | CBP = 10nF, ILOAD = 30mA, COUT = 1μF, VIN = VOUT+1V, ΔVRIPPLE=0.2VP-P, f = 217Hz, +25°C | 7 | ||
| EN input bias current low | IBL | 0.01 | µA | EN = 0V, Full (-40°C to +85°C) | 7 | ||
| Maximum output current | 500 | mA | +25°C | 7 | |||
| Start-up time | tSTR | 180 | µs | COUT = 1μF, No load, +25°C | 7 | ||
| Thermal shutdown temperature | TSHDN | 140 | °C | 7 | |||
| Junction-to-ambient thermal resistance (SOT23-5) | RθJA | 185.6 | °C/W | SOT23-5 column | 6 | ||
| Junction-to-case (top) thermal resistance (SOT23-5) | RθJC(top) | 104.3 | °C/W | SOT23-5 column | 6 | ||
| Junction-to-board thermal resistance (SOT23-5) | RθJB | 54.5 | °C/W | SOT23-5 column | 6 | ||
| Junction-to-top characterization parameter (SOT23-5) | ψJT | 31 | °C/W | SOT23-5 column | 6 | ||
| Junction-to-board characterization parameter (SOT23-5) | ψJB | 54.5 | °C/W | SOT23-5 column | 6 |
CAD (KiCad official)
- Symbol:
RS3236-ADJ8YF5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs3236-adj8yf5-etched.step/rs3236-adj8yf5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs3236-adj8yf5.step/rs3236-adj8yf5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (15 pp, sha256
e3bd3e3419455f27, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).