Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XC6901D101PR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-89-5

XC6901D101PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 -VIN power_in Negative supply input, with a rated input voltage range of -2.4V to -12.4V (VCE=3.6V) and recommended CIN of 1.0μF or more ceramic.
3 CE input ON/OFF control, active high (H = active, 1.2V to 3.6V; L = stand-by; open = stand-by via built-in pull-down resistor).
4 GND power_in Ground reference pin (0V).
5 -VOUT power_out Negative regulated output, up to 200mA, with CL of 1.0μF to 100μF and internal auto-discharge to GND level in stand-by.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-89-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage tolerance VOUT(E) -0.03 0.03 V IOUT=20mA, VOUT(T)≧-2.0V, relative to VOUT(T) 6
Maximum Output Current IOUTMAX 200 mA VIN=-4.4V, VOUT(T)>-2.4V 6
Dropout Voltage Vdif 700 1400 mV IOUT=20mA, VOUT(T)=-1.00V (chart E-1) 7
Supply Current IBIAS 100 200 μA VIN=-14.5V, VCE=1.5V, IOUT=0mA 6
Stand-by Current ISTB 0.01 0.1 μA VIN=-14.5V, VCE=0V, IOUT=0mA 6
Limit Current ILIM 210 300 mA VIN=-4.4V, VOUT(T)>-2.4V 6
Load Regulation ∆VOUT 20 60 mV VIN=-4.0V, VOUT(T)>-3.0V, 1mA≦IOUT≦100mA 6
Input Line Regulation ∆VOUT/(∆VIN・VOUT) 0.01 0.2 %/V -14.5V~-2.4V, VOUT(T)>-1.4V, IOUT=20mA 6
CE H Level Current ICEH 1.8 4 7 μA VIN=-12.4V, VCE=3.6V, XC6901D Series 6
CE L Level Current ICEL -0.1 0.1 μA VCE=GND 6
CE H Level Voltage VCEH 1.2 3.6 V 6
CE L Level Voltage VCEL 0 0.4 V min printed as GND 6
CL Discharge Resistor RDCHG 0.7 1.2 1.8 kΩ VIN=-8V, VOUT=-2V, VCE=GND 6
Soft Start Time tSS 0.15 0.4 1.2 ms RL=3kΩ, rise time CE=H to 95% of VOUT(E), VOUT(T)>-4.0V 6
Input Voltage VIN -2.4 V min printed as -16+VCE 6
Output Voltage Temperature Characteristics ∆VOUT/(∆Topr・VOUT) 50 ppm/℃ IOUT=20mA, -40℃≦Topr≦85℃, printed ±50 6
Power Supply Rejection Ratio PSRR 45 dB VIN={VOUT(T)-1.0}+0.5Vp-pAC, IOUT=20mA, f=1kHz 6
Short-Circuit Current ISHORT 80 mA VIN=VOUT(T)-2.0V, Short -VOUT to GND level 6
Detect Thermal Shutdown Temperature TTSD 150 ℃ IC Junction temperature 6
Release Thermal Shutdown Temperature TTSR 125 ℃ IC Junction temperature 6
Hysteresis Width THYS 25 ℃ TTSD-TTSR 6
Output Current IOUT 500 mA Use within IOUT≦Pd/(VOUT-VIN); Ta=25℃ 4
Power Dissipation SOT-89-5 Pd 500 mW Ta=25℃, package alone (1300 mW PCB mounted, reference only) 4
Power Dissipation SOT-89-5 PCB mounted Pd 1300 mW PCB mounted, reference only, Ta=25℃ 4
Operating Ambient Temperature Topr -40 85 ℃ 4
Storage Temperature Tstg -55 125 ℃ 4
Thermal Resistance SOT-89-5 76.92 ℃/W Board mount, Tj max=125℃ 25

CAD (KiCad official)

  • Symbol: XC6901D101PR-G
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: xc6901d101pr-g-etched.step / xc6901d101pr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6901d101pr-g.step / xc6901d101pr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (28 pp, sha256 66e95ece943c7233, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF