component
TLV9061SQDBVRQ1
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV9061SQDBVRQ1
Texas Instruments · Operational Amplifier · SOT-23-6
TLV9061SQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the datasheet describes it as the output pin for the single-channel amplifier. |
| 2 | V- | power_in | Negative (lowest) supply, or ground for single-supply operation; the operating supply range is 1.8 V to 5.5 V across V+ to V-. |
| 3 | IN+ | input | Non-inverting input; the input common-mode range extends 0.1 V beyond each supply rail (V- - 0.1 V to V+ + 0.1 V). |
| 4 | IN- | input | Inverting input; the input voltage must stay within the common-mode range of (V-) - 0.1 V to (V+) + 0.1 V under recommended operating conditions. |
| 5 | SHDN | input | Active-low shutdown input: low disables the amplifier and high enables it, with a high level of at least 1.1 V and a low level of at most V- + 0.2 V. |
| 6 | V+ | power_in | Positive (highest) supply; absolute maximum supply voltage (V+) - (V-) is 6 V and the recommended supply is 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -1.85 | 0.3 | 1.85 | mV | VS = 5V | 10 |
| Input offset voltage over temperature | VOS | -2 | 2 | mV | VS = 5V, TA = -40°C to 125°C | 10 | |
| Power-supply rejection ratio | PSRR | -80 | 7 | 80 | µV/V | VS = 1.8V to 5.5V, VCM = (V-) | 10 |
| Common-mode voltage range (min relative to V-, max relative to V+) | VCM | -0.1 | 0.1 | V | VS = 1.8V to 5.5V; min referenced to (V-), max referenced to (V+) | 10 | |
| Common-mode rejection ratio | CMRR | 80 | 103 | dB | VS = 5.5V, (V-), 0.1V < VCM < (V+), 1.4V, TA = -40°C to 125°C | 10 | |
| Common-mode rejection ratio | CMRR | 57 | 75 | dB | VS = 5.5V, VCM = -0.1V to 5.6V, TA = -40°C to 125°C | 10 | |
| Common-mode rejection ratio | CMRR | 88 | dB | VS = 1.8V, (V-), 0.1V < VCM < (V+), 1.4V, TA = -40°C to 125°C | 10 | ||
| Common-mode rejection ratio | CMRR | 70 | dB | VS = 1.8V, VCM = -0.1V to 1.9V, TA = -40°C to 125°C | 10 | ||
| Open-loop voltage gain | AOL | 100 | dB | VS = 1.8V, (V-) + 0.04V < VO < (V+), 0.04V, RL = 10kΩ | 10 | ||
| Open-loop voltage gain | AOL | 104 | 130 | dB | VS = 5.5V, (V-) + 0.05V < VO < (V+), 0.05V, RL = 10kΩ | 10 | |
| Output voltage swing from supply rail | VO | 20 | mV | VS = 5.5V, RL = 10kΩ | 11 | ||
| Output voltage swing from supply rail | VO | 60 | mV | VS = 5.5V, RL = 2kΩ | 11 | ||
| Quiescent current per amplifier | IQ | 538 | 750 | µA | VS = 5.5V, IO = 0mA | 11 | |
| Quiescent current per amplifier over temperature | IQ | 800 | µA | VS = 5.5V, IO = 0mA, TA = -40°C to 125°C | 11 | ||
| Quiescent current per amplifier in shutdown | IQSD | 0.5 | 1.5 | µA | VS = 1.8V to 5.5V, all amplifiers disabled, SHDN low | 11 | |
| Shutdown high-level threshold (amplifier enabled), referenced to (V-) | VSHDN_TH (R_HI) | 0.9 | 1.1 | V | VS = 1.8V to 5.5V; referenced to (V-) | 11 | |
| Shutdown low-level threshold (amplifier disabled), referenced to (V-) | VSDHN_TH (R_LO) | 0.2 | 0.7 | V | VS = 1.8V to 5.5V; referenced to (V-) | 11 | |
| Thermal resistance, junction-to-ambient (DBV 6-pin, SOT-23) | RθJA | 210.9 | °C/W | DBV (SOT-23) 6-pin column, TLV9061S-Q1 | 9 | ||
| Thermal resistance, junction-to-case (top) (DBV 6-pin, SOT-23) | RθJC(top) | 130.5 | °C/W | DBV (SOT-23) 6-pin column, TLV9061S-Q1 | 9 | ||
| Thermal resistance, junction-to-board (DBV 6-pin, SOT-23) | RθJB | 91.7 | °C/W | DBV (SOT-23) 6-pin column, TLV9061S-Q1 | 9 | ||
| Junction-to-top characterization parameter (DBV 6-pin, SOT-23) | ψJT | 70.1 | °C/W | DBV (SOT-23) 6-pin column, TLV9061S-Q1 | 9 | ||
| Junction-to-board characterization parameter (DBV 6-pin, SOT-23) | ψJB | 91.5 | °C/W | DBV (SOT-23) 6-pin column, TLV9061S-Q1 | 9 |
CAD (KiCad official)
- Symbol:
TLV9061SQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tlv9061sqdbvrq1-etched.step/tlv9061sqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9061sqdbvrq1.step/tlv9061sqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
668b650594bcfe91, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).