component
F12T10
Public Made by Adomby adom
TLC Electronic Disposable Fuses, 1206. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownF12T10
TLC Electronic · Disposable Fuses · 1206
F12T10 from TLC Electronic, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse terminal 1 (end cap, 0.50 mm wide); the fuse is non-polarized, rated 10 A, 32 V DC, with 150 A breaking capacity at 32 Vdc. |
| 2 | 2 | passive | Fuse terminal 2 (end cap, 0.50 mm wide); the fuse is non-polarized, rated 10 A, 32 V DC, with 150 A breaking capacity at 32 Vdc. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TLC Electronic |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Time at 1.0In (rated current 100%) | 4 | hour | Time-current row, 1.0In column (column mapping inferred from garbled text) | 2 | |||
| Time at 3.5In | 5 | sec | Time-current row, 3.5In column (column mapping inferred from garbled text) | 2 | |||
| Time at 10.0In | 0.2 | 10 | ms | Time-current row, 10.0In column (column mapping inferred from garbled text) | 2 | ||
| Operating temperature | -55 | 125 | ℃ | With proper correction factor applied | 6 | ||
| Rated current | In | 10 | A | Part No. F12T10, Rated Current column | 2 | ||
| Rated voltage | 32 | V | Rated voltage (DC) as printed for F12T10 | 2 | |||
| DC breaking capacity | 150 | A | @32Vdc; DC interrupting rating measured at rated voltage, time constant less than 50 microseconds, battery source | 2 | |||
| Typical cold resistance | 6.5 | mOhms | Measured at <10% of rated current, ambient 25℃ | 2 | |||
| Typical voltage drop | 110 | mV | Printed without test conditions | 2 | |||
| Typical pre-arcing I2t | I2t | 22 | A2Sec | Measured at 10In current | 2 | ||
| Wave solder reservoir temperature | 260 | ℃ | Wave solder, reservoir temperature | 5 | |||
| Wave solder time in reservoir | 10 | sec | Wave solder, time in reservoir, maximum | 5 | |||
| Infrared reflow temperature | 260 | ℃ | Infrared reflow | 5 | |||
| Infrared reflow time | 30 | sec | Infrared reflow, maximum | 5 | |||
| Preheat and soak temperature (Tsmin to Tsmax) | Tsmin, Tsmax | 150 | 200 | ℃ | Lead-free solder reflow profile, preheat and soak | 5 | |
| Average ramp-up rate (Tsmax to Tp) | 3 | ℃/Second | Lead-free solder reflow profile, maximum | 5 | |||
| Time at liquidous (tL) | tL | 60 | 150 | Seconds | Lead-free solder reflow profile, liquidous temperature TL 217℃ | 5 | |
| Peak package body temperature (TP) | TP | 260 | ℃ | Lead-free solder reflow profile | 5 | ||
| Average ramp-down rate (TP to Tsmax) | 6 | ℃/Second | Lead-free solder reflow profile, maximum | 5 | |||
| Time (25℃ to peak temperature) | 8 | Minutes | Lead-free solder reflow profile, maximum | 5 |
CAD (KiCad official)
- Symbol:
F12T10 - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
f12t10-etched.step/f12t10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f12t10.step/f12t10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TLC Electronic datasheet (6 pp, sha256
2d3b9d4afab1268b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).