component
TLV62084ADSGT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV62084ADSGT
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TLV62084ADSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable logic input: logic HIGH enables the device, logic LOW disables it into shutdown, and it must not be left floating. |
| 2 | GND | power_in | Power and signal ground. |
| 3 | GND | power_in | Power and signal ground. |
| 4 | FB | input | Feedback terminal for the internal control loop, connected to the external feedback divider to program the output voltage. |
| 5 | VOS | input | Output voltage sense terminal for the internal control loop; must be connected to the output. |
| 6 | PG | output | Power Good open-drain output, pulled low if the output voltage is below regulation limits; it can be left floating if not used and sinks up to 1 mA per the absolute maximum ratings. |
| 7 | SW | power_out | Switch terminal connected to the internal MOSFET switches and the output filter inductor, with an absolute maximum of VIN + 0.3 V (10 V for AC pulses under 10 ns). |
| 8 | VIN | power_in | Power supply voltage input, 2.7 V to 6 V for this part per the recommended operating conditions. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage range VIN, PG, VOS | VIN | -0.3 | 7 | V | 5 | ||
| Voltage range SW | SW | -0.3 | V | max VIN + 0.3 V | 5 | ||
| Voltage range SW (AC, less than 10 ns) | SW | -3 | 10 | V | AC, less than 10 ns | 5 | |
| Voltage range FB | FB | -0.3 | 3.6 | V | 5 | ||
| Voltage range EN | EN | -0.3 | V | max VIN + 0.3 V | 5 | ||
| Power Good Sink Current | PG | 1 | mA | 5 | |||
| Operating junction temperature range | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Input voltage range, TLV62084, TLV62084A | VIN | 2.7 | 6 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input voltage range, TLV62084, TLV62084A | VIN | 2.7 | 6 | V | 6 | ||
| Quiescent current into VIN | IQ | 30 | uA | IOUT = 0 mA, Device not switching | 6 | ||
| Shutdown current into VIN | ISD | 1 | µA | EN = LOW | 6 | ||
| Under voltage lock out | VUVLO | 1.8 | 2 | V | Input voltage falling | 6 | |
| High level input voltage (EN) | VIH | 1 | V | 2.5 V ≤ VIN ≤ 6 V | 6 | ||
| Low level input voltage (EN) | VIL | 0.4 | V | 2.5 V ≤ VIN ≤ 6 V | 6 | ||
| Input leakage current (EN) | ILKG | 0.01 | 0.5 | µA | 6 | ||
| Power good threshold | VPG | -15 | -10 | -5 | % | VOUT falling referenced to VOUT nominal | 6 |
| Low level voltage (PG) | VOL | 0.3 | V | Isink = 500 µA | 6 | ||
| PG Leakage current | IPG,LKG | 0.01 | 0.1 | µA | VPG = 5.0 V | 6 | |
| Output voltage range | VOUT | 0.5 | 4 | V | 6 | ||
| Feedback regulation voltage | VFB | 0.438 | 0.45 | 0.462 | V | VIN ≥ 2.5 V and VIN ≥ VOUT + 1 V | 6 |
| Feedback input bias current | IFB | 10 | 100 | nA | VFB = 0.45 V | 6 | |
| High side FET switch current-limit, TLV62084A | ILIM | 2.3 | 2.8 | 4 | A | Rising inductor current | 6 |
| Under voltage lock out hysteresis | VUVLO | 120 | mV | Rising above VUVLO | 6 | ||
| Thermal shutdown | TJSD | 150 | °C | Temperature rising | 6 | ||
| Thermal shutdown hysteresis | TJSD | 20 | °C | Temperature falling below TJSD | 6 | ||
| Power good hysteresis | 5 | % | 6 | ||||
| Output discharge resistor | RDIS | 1 | kΩ | EN = LOW, VOUT = 1.8 V | 6 | ||
| High side FET on-resistance | RDS(on) | 120 | mΩ | ISW = 500 mA | 6 | ||
| Low side FET on-resistance | RDS(on) | 90 | mΩ | ISW = 500 mA | 6 | ||
| Junction-to-ambient thermal resistance | θJA | 59.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | θJCtop | 70.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance | θJB | 30.9 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 1.4 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 31.5 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | θJCbot | 8.6 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TLV62084ADSGT - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tlv62084adsgt-etched.step/tlv62084adsgt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62084adsgt.step/tlv62084adsgt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
379c8612154eb2b4, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).