component
TMS320F28027FPTTR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTMS320F28027FPTTR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
TMS320F28027FPTTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29/SCITXDA/SCLA/TZ3 | bidirectional | General-purpose I/O 29 shared with SCI-A transmit, I2C-A clock (open-drain bidirectional) and trip zone 3 input; inputs are not 5-V tolerant. |
| 2 | TRST | input | JTAG test reset with internal pulldown; must be maintained low during normal operation and requires an external pulldown (2.2 kΩ generally adequate). |
| 3 | XRS | bidirectional | Device reset input and watchdog reset output (open-drain with internal pullup); driven low during power-on/brown-out and for 512 OSCCLK cycles on watchdog reset, with a 2.2 kΩ to 10 kΩ pullup to VDDIO and a capacitor of 100 nF or less to VSS. |
| 4 | ADCINA6/AIO6 | input | ADC Group A channel 6 analog input (also digital AIO6); ADC full-scale range is 0 to 3.3 V. |
| 5 | ADCINA4/COMP2A/AIO4 | input | ADC Group A channel 4 analog input, also Comparator 2A input and AIO4; Comparator 2 is available only on the 48-pin device. |
| 6 | ADCINA7 | input | ADC Group A channel 7 analog input with 0 to 3.3 V full-scale range. |
| 7 | ADCINA3 | input | ADC Group A channel 3 analog input with 0 to 3.3 V full-scale range. |
| 8 | ADCINA1 | input | ADC Group A channel 1 analog input with 0 to 3.3 V full-scale range. |
| 9 | ADCINA2/COMP1A/AIO2 | input | ADC Group A channel 2 analog input, also Comparator 1A input and AIO2. |
| 10 | ADCINA0/VREFHI | input | ADC Group A channel 0 analog input; doubles as ADC external reference high (VREFHI), used only in external reference mode and must not exceed VDDA. |
| 11 | VDDA | power_in | Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin. |
| 12 | VSSA/VREFLO | power_in | Analog ground pin, which also serves as ADC external reference low (VREFLO) and is always tied to ground. |
| 13 | ADCINB1 | input | ADC Group B channel 1 analog input with 0 to 3.3 V full-scale range. |
| 14 | ADCINB2/COMP1B/AIO10 | input | ADC Group B channel 2 analog input, also Comparator 1B input and AIO10. |
| 15 | ADCINB3 | input | ADC Group B channel 3 analog input with 0 to 3.3 V full-scale range. |
| 16 | ADCINB4/COMP2B/AIO12 | input | ADC Group B channel 4 analog input, also Comparator 2B input and AIO12; Comparator 2 is available only on the 48-pin device. |
| 17 | ADCINB6/AIO14 | input | ADC Group B channel 6 analog input (also digital AIO14). |
| 18 | ADCINB7 | input | ADC Group B channel 7 analog input with 0 to 3.3 V full-scale range. |
| 19 | GPIO34/COMP2OUT | bidirectional | General-purpose I/O 34 with direct Comparator 2 output; may glitch during power-up when the on-chip VREG is used and is not glitch-free. |
| 20 | GPIO35 (TDI) | bidirectional | General-purpose I/O 35 shared with JTAG test data input (TDI, internal pullup), clocked on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used. |
| 21 | GPIO36 (TMS) | bidirectional | General-purpose I/O 36 shared with JTAG test-mode select (TMS, internal pullup), clocked into the TAP controller on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used. |
| 22 | GPIO37/TDO | tri_state | General-purpose I/O 37 shared with JTAG scan output TDO (8-mA drive), shifted out on the falling edge of TCK; may glitch during power-up when the on-chip VREG is used. |
| 23 | GPIO38/XCLKIN (TCK) | bidirectional | General-purpose I/O 38 shared with JTAG test clock (TCK, internal pullup) and external oscillator input XCLKIN; the external clock path must be disabled during JTAG debug to avoid contention with TCK. |
| 24 | GPIO18/SPICLKA/SCITXDA/XCLKOUT | bidirectional | General-purpose I/O 18 shared with SPI-A clock, SCI-A transmit and XCLKOUT output (SYSCLKOUT divided by 1, 2 or 4; reset value SYSCLKOUT/4); the GPIO18 mux must be set to XCLKOUT for it to reach the pin. |
| 25 | GPIO19/XCLKIN/SPISTEA/SCIRXDA/ECAP1 | bidirectional | General-purpose I/O 19 shared with external oscillator input XCLKIN, SPI-A slave transmit enable, SCI-A receive and eCAP1; may glitch during power-up when the on-chip VREG is used. |
| 26 | GPIO17/SPISOMIA/TZ3 | bidirectional | General-purpose I/O 17 shared with SPI-A slave out/master in and trip zone 3 input. |
| 27 | GPIO16/SPISIMOA/TZ2 | bidirectional | General-purpose I/O 16 shared with SPI-A slave in/master out and trip zone 2 input. |
| 28 | GPIO1/EPWM1B/COMP1OUT | bidirectional | General-purpose I/O 1 shared with Enhanced PWM1 output B and the direct output of Comparator 1. |
| 29 | GPIO0/EPWM1A | bidirectional | General-purpose I/O 0 shared with Enhanced PWM1 output A and HRPWM channel; PWM pin pullups are not enabled at reset. |
| 30 | TEST | bidirectional | Test pin reserved for TI; must be left unconnected. |
| 31 | GPIO32/SDAA/EPWMSYNCI/ADCSOCAO | bidirectional | General-purpose I/O 32 shared with I2C-A data (open-drain bidirectional), EPWM external sync input and ADC start-of-conversion A output. |
| 32 | VDD | power_in | CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground. |
| 33 | VSS | power_in | Digital ground pin. |
| 34 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie to VSS to enable the internal 1.8-V VREG, or tie to VDDIO to disable it and use an external 1.8-V supply. |
| 35 | VDDIO | power_in | Digital I/O buffer and flash memory power pin; single supply source when VREG is enabled, with a decoupling capacitor sized per the system voltage regulation solution. |
| 36 | GPIO33/SCLA/EPWMSYNCO/ADCSOCBO | bidirectional | General-purpose I/O 33 shared with I2C-A clock (open-drain bidirectional), EPWM external sync output and ADC start-of-conversion B output. |
| 37 | GPIO2/EPWM2A | bidirectional | General-purpose I/O 2 shared with Enhanced PWM2 output A and HRPWM channel. |
| 38 | GPIO3/EPWM2B/COMP2OUT | bidirectional | General-purpose I/O 3 shared with Enhanced PWM2 output B and direct Comparator 2 output (48-pin device only). |
| 39 | GPIO4/EPWM3A | bidirectional | General-purpose I/O 4 shared with Enhanced PWM3 output A and HRPWM channel. |
| 40 | GPIO5/EPWM3B/ECAP1 | bidirectional | General-purpose I/O 5 shared with Enhanced PWM3 output B and Enhanced Capture input/output 1. |
| 41 | GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO | bidirectional | General-purpose I/O 6 shared with Enhanced PWM4 output A (HRPWM channel), external ePWM sync pulse input and external ePWM sync pulse output. |
| 42 | GPIO7/EPWM4B/SCIRXDA | bidirectional | General-purpose I/O 7 shared with Enhanced PWM4 output B and SCI-A receive data. |
| 43 | VDD | power_in | CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground. |
| 44 | VSS | power_in | Digital ground pin. |
| 45 | X1 | input | On-chip 1.8-V crystal oscillator input; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be tied to GND if not used. |
| 46 | X2 | output | On-chip crystal oscillator output; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be left unconnected if not used. |
| 47 | GPIO12/TZ1/SCITXDA | bidirectional | General-purpose I/O 12 shared with trip zone 1 input and SCI-A transmit data. |
| 48 | GPIO28/SCIRXDA/SDAA/TZ2 | bidirectional | General-purpose I/O 28 shared with SCI receive data, I2C-A data (open-drain bidirectional) and trip zone 2 input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDDIO (I/O and Flash) with respect to VSS | VDDIO | -0.3 | 4.6 | V | with respect to VSS | 15 | |
| Supply voltage VDD with respect to VSS | VDD | -0.3 | 2.5 | V | with respect to VSS | 15 | |
| Analog voltage VDDA with respect to VSSA | VDDA | -0.3 | 4.6 | V | with respect to VSSA | 15 | |
| Input voltage VIN (3.3 V) | VIN | -0.3 | 4.6 | V | 15 | ||
| Input voltage VIN (X1) | VIN (X1) | -0.3 | 2.5 | V | 15 | ||
| Output voltage | VO | -0.3 | 4.6 | V | 15 | ||
| Input clamp current, digital/analog input (per pin) | IIK | -20 | 20 | mA | VIN < VSS or VIN > VDDIO | 15 | |
| Input clamp current, analog input (per pin) | IIKANALOG | -20 | 20 | mA | VIN < VSSA or VIN > VDDA | 15 | |
| Input clamp current, total for all inputs | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA or VIN > VDDIO/VDDA | 15 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDDIO | 15 | |
| Junction temperature | TJ | -40 | 150 | °C | 15 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 15 | ||
| Device supply voltage, I/O | VDDIO | 2.97 | 3.3 | 3.63 | V | 16 | |
| Device supply voltage CPU (internal VREG disabled and 1.8 V supplied externally) | VDD | 1.71 | 1.8 | 1.995 | V | 16 | |
| Analog supply voltage | VDDA | 2.97 | 3.3 | 3.63 | V | 16 | |
| Device clock frequency (system clock), 28026/28027 | 2 | 60 | MHz | 16 | |||
| High-level input voltage (3.3 V) | VIH | 2 | V | 16 | |||
| Low-level input voltage (3.3 V) | VIL | 0.8 | V | 16 | |||
| High-level output source current, all GPIO/AIO pins | IOH | -4 | mA | VOH = VOH(MIN) | 16 | ||
| High-level output source current, Group 2 pins | IOH | -8 | mA | VOH = VOH(MIN); Group 2 pins | 16 | ||
| Low-level output sink current, all GPIO/AIO pins | IOL | 4 | mA | VOL = VOL(MAX) | 16 | ||
| Low-level output sink current, Group 2 pins | IOL | 8 | mA | VOL = VOL(MAX); Group 2 pins | 16 | ||
| Junction temperature, T version | TJ | -40 | 105 | °C | T version | 16 | |
| High-level output voltage | VOH | 2.4 | V | IOH = IOH MAX | 21 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 21 | ||
| Input current (low level), pin with pullup enabled, all GPIO | IIL | -80 | -140 | -205 | μA | VDDIO = 3.3 V, VIN = 0 V | 21 |
| Input current (low level), XRS pin | IIL | -225 | -290 | -360 | μA | VDDIO = 3.3 V, VIN = 0 V, pin with pullup enabled | 21 |
| Input current (low level), pin with pulldown enabled | IIL | -2 | 2 | μA | VDDIO = 3.3 V, VIN = 0 V | 21 | |
| Input current (high level), pin with pullup enabled | IIH | -2 | 2 | μA | VDDIO = 3.3 V, VIN = VDDIO | 22 | |
| Input current (high level), pin with pulldown enabled | IIH | 28 | 50 | 80 | μA | VDDIO = 3.3 V, VIN = VDDIO | 22 |
| Output current, pullup or pulldown disabled | IOZ | -2 | 2 | μA | VO = VDDIO or 0 V | 22 | |
| VDDIO BOR trip point, falling VDDIO | 2.42 | 2.65 | 3.135 | V | Falling VDDIO | 22 | |
| Supervisor reset release delay time | 400 | 800 | μs | Time after BOR/POR/OVR event is removed to XRS release | 22 | ||
| ADC clock, 60-MHz device | 0.001 | 60 | MHz | 74 | |||
| ADC sample window, 28027/26/23/22 | 7 | 64 | ADC clocks | 74 | |||
| INL (integral nonlinearity) at ADC clock ≤ 30 MHz | -4 | 4 | LSB | ADC clock ≤ 30 MHz | 74 | ||
| DNL (differential nonlinearity) at ADC clock ≤ 30 MHz | -1 | 1 | LSB | ADC clock ≤ 30 MHz, no missing codes | 74 | ||
| Offset error, executing Device_Cal function | -20 | 0 | 20 | LSB | Executing Device_Cal function | 74 | |
| Offset error, executing periodic self-recalibration | -4 | 0 | 4 | LSB | Executing periodic self-recalibration | 74 | |
| Overall gain error with internal reference | -60 | 60 | LSB | Internal reference | 74 | ||
| Overall gain error with external reference | -40 | 40 | LSB | External reference | 74 | ||
| VREFLO current | VREFLO | -100 | μA | 74 | |||
| VREFHI current | VREFHI | 100 | μA | 74 | |||
| Analog input voltage with internal reference | 0 | 3.3 | V | Internal reference | 74 | ||
| Input leakage current | -5 | 5 | μA | 74 | |||
| Comparator input offset | -5 | 5 | mV | 83 | |||
| Comparator response time to PWM trip zone (async) | 30 | ns | 83 | ||||
| DAC INL | -3 | 3 | LSB | 83 | |||
| IDD operational current, VREG disabled | IDD | 62 | 70 | mA | Operational (Flash), 40-MHz SYSCLKOUT, VREG disabled | 17 | |
| IDDIO operational current, VREG enabled | IDDIO | 70 | 80 | mA | Operational (Flash), 40-MHz SYSCLKOUT, VREG enabled | 17 | |
| IDD IDLE current, VREG disabled | IDD | 15 | 17 | mA | IDLE, 40-MHz SYSCLKOUT, VREG disabled | 17 | |
| IDD STANDBY current, VREG disabled | IDD | 3 | 6 | mA | STANDBY, 40-MHz SYSCLKOUT, VREG disabled | 17 | |
| Random Flash access time | ta(fr) | 40 | ns | 34 | |||
| Paged Flash access time | ta(fp) | 40 | ns | 34 | |||
| OTP access time | ta(OTP) | 60 | ns | 34 | |||
| Flash endurance for the array (write/erase cycles), T material | Nf | 20000 | 50000 | cycles | 0°C to 105°C (ambient) | 33 | |
| Junction-to-case thermal resistance | RΘJC | 13.6 | °C/W | N/A air flow | 23 | ||
| Junction-to-board thermal resistance | RΘJB | 30.6 | °C/W | N/A air flow | 23 | ||
| Junction-to-free air thermal resistance (High k PCB) | RΘJA | 64 | °C/W | 0 lfm | 23 | ||
| Junction-to-free air thermal resistance (High k PCB) | RΘJA | 45 | °C/W | 500 lfm | 23 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PCT | TBPRDHR 0x6806 0x6846 0x6886 0x68C6 1 / 1 Time Base Period High Resolution Register(1) CMPCTL 0x6807 0x6847 0x6887 0x68C7 1 / 0 Counter Compare Control Register | 99 |
CAD (KiCad official)
- Symbol:
TMS320F28027FPTTR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
tms320f28027fpttr-etched.step/tms320f28027fpttr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tms320f28027fpttr.step/tms320f28027fpttr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (147 pp, sha256
01257f3966342887, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).