component
TL2843BDR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL2843BDR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-14
TL2843BDR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | bidirectional | Error amplifier compensation pin; error amplifier output sink current is limited to 10 mA maximum. |
| 2 | NC | unconnected | No internal connection; do not connect. |
| 3 | VFB | input | Error amplifier input, with recommended input voltage of 0 V to 5.5 V (absolute maximum −0.3 V to 6.3 V). |
| 4 | NC | unconnected | No internal connection; do not connect. |
| 5 | ISENSE | input | Current sense comparator input, with recommended input voltage of 0 V to 5.5 V (absolute maximum −0.3 V to 6.3 V). |
| 6 | NC | unconnected | No internal connection; do not connect. |
| 7 | RT/CT | bidirectional | Oscillator RC timing input, with recommended voltage of 0 V to 5.5 V. |
| 8 | POWER GROUND | power_in | Output PWM ground terminal; recommended voltage range is −0.1 V to 1 V (applies to the 14-pin D package). |
| 9 | GND | power_in | Device power supply ground terminal; all voltages are referenced to this pin. |
| 10 | OUTPUT | output | PWM output for driving an N-channel MOSFET gate; output voltage 0 V to 30 V, average output current 200 mA maximum, ±1 A peak. |
| 11 | VC | power_in | Output PWM positive voltage supply; recommended voltage up to 30 V (applies to the 14-pin D package). |
| 12 | VCC | power_in | Device positive supply; absolute maximum 30 V for a low-impedance source, with supply current self-limited when ICC is above 30 mA. |
| 13 | NC | unconnected | No internal connection; do not connect. |
| 14 | REF | output | Oscillator voltage reference output; reference output current limited to −20 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Power Management (PMIC) |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
TL2843BDR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
tl2843bdr-etched.step/tl2843bdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl2843bdr.step/tl2843bdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
42e42dc7a6e780d9, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).