component
TPS62006DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62006DGSR
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
TPS62006DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input from 2V to 5.5V. |
| 2 | FC | power_in | Supply bypass pin; connect 0.1-μF coupling capacitor as close as possible for high frequency input voltage supply filtering. |
| 3 | GND | power_in | Ground reference. |
| 4 | PG | output | Open-drain power good comparator output that activates when output voltage exceeds 92% of nominal value. |
| 5 | FB | input | Feedback input for adjustable output voltage; external resistive divider connected for adjustable version with internal divider disabled. |
| 6 | ILIM | input | Current limit control pin; connect to GND for 600 mA typical limit or to VIN for 1200 mA typical limit. |
| 7 | SYNC | input | External clock synchronization input for CMOS level signals up to 1 MHz; high enables low-noise PWM mode, low enables PFM/PWM power save mode. |
| 8 | EN | input | Enable control; logic high enables converter operation and logic low forces shutdown reducing supply current to less than 1 μA. |
| 9 | L | output | Switching output pin connected to the drain of the internal power MOSFETs for external inductor connection. |
| 10 | PGND | power_in | Power ground; connect all power grounds to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TPS62006DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps62006dgsr-etched.step/tps62006dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62006dgsr.step/tps62006dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
c0f89c845b131ca5, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).