3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT6014IS8#PBF
Analog Devices · Operational Amplifier · SOP-8
LT6014IS8#PBF from Analog Devices, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output. Rail-to-rail output stage swings to within 40mV of either supply rail; slew rate 0.2V/µs; stable driving up to 500pF load at AV ≥ 5. |
| 2 | -IN A | input | Amplifier A inverting input. High-impedance precision input, 250pA maximum input bias current, 20MΩ differential input resistance, 4pF input capacitance. |
| 3 | +IN A | input | Amplifier A non-inverting input. High-impedance precision input, common-mode input range extends from (V-)+0.7V to (V+)-1V (typical); 250pA max IB. |
| 4 | V- | power_in | Negative supply rail. Total supply voltage V+ to V- must not exceed 40V; operating range 2.7V to ±18V split-supply or single-supply. |
| 5 | +IN B | input | Amplifier B non-inverting input. High-impedance precision input, common-mode range (V-)+0.7V to (V+)-1V (typ); 250pA max IB. |
| 6 | -IN B | input | Amplifier B inverting input. High-impedance precision input, 250pA maximum bias current, 20MΩ differential input resistance. |
| 7 | OUT B | output | Amplifier B output. Rail-to-rail output stage, swings to within 40mV of either supply rail; 0.2V/µs slew rate; stable at AV ≥ 5 with up to 500pF load. |
| 8 | V+ | power_in | Positive supply rail. Operating supply range 2.7V to 36V single-supply (or ±18V split); typical supply current 145µA per amplifier (290µA total for dual). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LT6014IS8#PBFCS8LT6014IS8#PBFLT6014IS8#PBFACS8LT6014IS8#PBFAIS8LT6014IS8#PBFCDDLT6014IS8#PBFIDDLT6014IS8#PBFACDDLT6014IS8#PBFAIDD
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 20 | 75 | µV | VS = 5V, 0V; VCM = 2.5V; TA = 25°C | 3 | |
| Input Offset Voltage | VOS | 100 | µV | VS = 5V, 0V; TA = 0°C to 70°C | 3 | ||
| Input Offset Voltage | VOS | 125 | µV | VS = 5V, 0V; TA = –40°C to 85°C | 3 | ||
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 0.8 | µV/°C | S8 packages; not 100% tested | 3 | |
| Input Offset Current | IOS | 150 | 800 | pA | LT6013/LT6014 (standard grades) | 3 | |
| Input Offset Current | IOS | 1000 | pA | TA = 0°C to 70°C | 3 | ||
| Input Offset Current | IOS | 1200 | pA | TA = –40°C to 85°C | 3 | ||
| Input Bias Current | IB | -800 | 150 | 800 | pA | LT6014S8, LT6014DD; VS = 5V, 0V | 3 |
| Input Bias Current | IB | -1000 | 1000 | pA | TA = 0°C to 70°C | 3 | |
| Input Bias Current | IB | -1200 | 1200 | pA | TA = –40°C to 85°C | 3 | |
| Input Voltage Range (Positive) | VCM | 3.8 | 4 | V | Guaranteed by CMRR; VS = 5V, 0V | 4 | |
| Input Voltage Range (Negative) | VCM | 0.7 | 1 | V | Guaranteed by CMRR; VS = 5V, 0V | 4 | |
| Common Mode Rejection Ratio | CMRR | 107 | 135 | dB | VCM = 1V to 3.8V | 4 | |
| Minimum Supply Voltage | VS(min) | 2.4 | 2.7 | V | Guaranteed by PSRR | 4 | |
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = 2.7V to 36V, VCM = 1/2VS | 4 | |
| Large-Signal Voltage Gain | AVOL | 300 | 2000 | V/mV | RL = 10k, VOUT = 1V to 4V | 4 | |
| Large-Signal Voltage Gain | AVOL | 250 | 2000 | V/mV | RL = 2k, VOUT = 1V to 4V | 4 | |
| Channel Separation | 110 | 140 | dB | VOUT = 1V to 4V, LT6014 | 4 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 35 | 55 | mV | No load, 50mV overdrive | 4 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 65 | mV | No load, 50mV overdrive; TA over full range | 4 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 120 | 170 | mV | ISOURCE = 1mA, 50mV overdrive | 4 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 220 | mV | ISOURCE = 1mA, 50mV overdrive; TA over full range | 4 | ||
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 40 | 55 | mV | No load, 50mV overdrive | 4 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 65 | mV | No load, 50mV overdrive; TA over full range | 4 | ||
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 150 | 225 | mV | ISINK = 1mA, 50mV overdrive | 4 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 275 | mV | ISINK = 1mA, 50mV overdrive; TA over full range | 4 | ||
| Output Short-Circuit Current (Source) | ISC | 8 | 14 | mA | VOUT = 0V, 1V overdrive (source) | 4 | |
| Output Short-Circuit Current (Sink) | ISC | 8 | 21 | mA | VOUT = 5V, –1V overdrive (sink) | 4 | |
| Slew Rate | SR | 0.15 | 0.2 | V/µs | AV = –10, RF = 50k, RG = 5k | 4 | |
| Slew Rate | SR | 0.12 | V/µs | TA = 0°C to 70°C | 4 | ||
| Gain Bandwidth Product | GBW | 1 | 1.4 | MHz | f = 10kHz | 4 | |
| Supply Current per Amplifier | IS | 145 | 165 | µA | VS = 5V, 0V; per amplifier | 5 | |
| Supply Current per Amplifier | IS | 200 | 250 | µA | VS = ±15V, VCM = 0V, RL to 0V; per amplifier | 7 | |
| Supply Current per Amplifier | IS | 310 | µA | VS = ±15V; TA = –40°C to 85°C | 7 | ||
| Input Voltage Range | VCM | -13.5 | 14 | V | Guaranteed by CMRR; VS = ±15V | 6 | |
| Common Mode Rejection Ratio | CMRR | 115 | 135 | dB | VS = ±15V; VCM = –13.5V to 13.5V | 6 | |
| Common Mode Rejection Ratio | CMRR | 112 | 135 | dB | VS = ±15V; TA = –40°C to 85°C | 6 | |
| Minimum Supply Voltage | VS(min) | 1.2 | 1.35 | V | Guaranteed by PSRR | 6 | |
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = ±1.35V to ±18V; TA = –40°C to 85°C | 6 | |
| Large-Signal Voltage Gain | AVOL | 1000 | 2000 | V/mV | VS = ±15V; RL = 10k, VOUT = –13.5V to 13.5V | 6 | |
| Large-Signal Voltage Gain | AVOL | 500 | 1500 | V/mV | VS = ±15V; RL = 5k, VOUT = –13.5V to 13.5V | 6 | |
| Channel Separation | 120 | 140 | dB | VS = ±15V; VOUT = –13.5V to 13.5V; TA = –40°C to 85°C; LT6014 | 6 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 45 | 80 | mV | VS = ±15V; No load, 50mV overdrive | 7 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 100 | mV | VS = ±15V; No load, 50mV overdrive; TA over full range | 7 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 140 | 195 | mV | VS = ±15V; ISOURCE = 1mA, 50mV overdrive | 7 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 240 | mV | VS = ±15V; ISOURCE = 1mA, 50mV overdrive; TA over full range | 7 | ||
| Maximum Output Swing (Negative, Referred to V–) | VOUT | 45 | 80 | mV | VS = ±15V; No load, 50mV overdrive | 7 | |
| Maximum Output Swing (Negative, Referred to V–) | VOUT | 100 | mV | VS = ±15V; No load, 50mV overdrive; TA over full range | 7 | ||
| Maximum Output Swing (Negative, Referred to V–) | VOUT | 150 | 250 | mV | VS = ±15V; ISINK = 1mA, 50mV overdrive | 7 | |
| Maximum Output Swing (Negative, Referred to V–) | VOUT | 300 | mV | VS = ±15V; ISINK = 1mA, 50mV overdrive; TA over full range | 7 | ||
| Output Short-Circuit Current (Source) | ISC | 8 | 15 | mA | VS = ±15V; VOUT = 0V, 1V overdrive (source) | 7 | |
| Output Short-Circuit Current (Sink) | ISC | 8 | 20 | mA | VS = ±15V; VOUT = 0V, –1V overdrive (sink) | 7 | |
| Total Supply Voltage (V+ to V–) | V+ – V– | 40 | V | 2 | |||
| Differential Input Voltage | VID | 10 | V | Note 2 | 2 | ||
| Input Current | II | -10 | 10 | mA | Note 2 | 2 | |
| Operating Temperature Range | TA | -40 | 85 | °C | Note 4 | 2 | |
| Storage Temperature Range (S8 package) | TSTG | -65 | 150 | °C | S8 package | 2 | |
| Maximum Junction Temperature (S8 package) | TJMAX | 150 | °C | S8 package | 2 | ||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, Junction-to-Ambient (S8 package) | θJA | 190 | °C/W | S8 package | 2 |
CAD (KiCad official)
- Symbol:
LT6014IS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6014is8-pbf-etched.step/lt6014is8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6014is8-pbf.step/lt6014is8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
08241a5739730c42, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).