3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMMST3906-7-F
Diodes Incorporated · Bipolar Transistors - BJT · SOT-323
MMST3906-7-F from Diodes Incorporated, in a SOT-323. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base of the PNP transistor, bottom-left pin in the top-view pinout; emitter-base voltage limit is -5V (VEBO). |
| 2 | E | passive | Emitter of the PNP transistor, bottom-right pin in the top-view pinout; VEBO is -5V. |
| 3 | C | passive | Collector of the PNP transistor, single pin on top side in the top-view pinout; VCEO -40V, VCBO -40V, IC max -200mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-323 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | BVCEO | -40 | V | IC = -1mA, IB = 0 | 3 | ||
| Collector-Base Breakdown Voltage | BVCBO | -40 | V | IC = -10µA, IE = 0 | 3 | ||
| Emitter-Base Breakdown Voltage | BVEBO | -5 | V | IE = -10µA, IC = 0 | 3 | ||
| Collector Cutoff Current | ICEX | -50 | nA | VCE = -30V, VEB(OFF) = -3V | 3 | ||
| Base Cutoff Current | IBL | -50 | nA | VCE = -30V, VEB(OFF) = -3V | 3 | ||
| DC Current Gain | hFE | 60 | IC = -100µA, VCE = -1V | 3 | |||
| DC Current Gain | hFE | 80 | IC = -1mA, VCE = -1V | 3 | |||
| DC Current Gain | hFE | 100 | IC = -10mA, VCE = -1V | 3 | |||
| DC Current Gain | hFE | 30 | IC = -100mA, VCE = -1V | 3 | |||
| DC Current Gain (upper limit) | hFE | 300 | 3 | ||||
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.2 | V | IC = -10mA, IB = -1mA | 3 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.3 | V | IC = -50mA, IB = -5mA | 3 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.65 | V | IC = -10mA, IB = -1mA | 3 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.85 | V | IC = -10mA, IB = -1mA | 3 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.95 | V | IC = -50mA, IB = -5mA | 3 | ||
| Output Capacitance | COBO | 4.5 | pF | VCB = -5V, f = 1.0MHz, IE = 0 | 3 | ||
| Input Capacitance | CIBO | 10 | pF | VEB = -0.5V, f = 1.0MHz, IC = 0 | 3 | ||
| Input Impedance | hIE | 2 | kΩ | VCE = 1V, IC = 10mA, f = 1kHz | 3 | ||
| Input Impedance | hIE | 12 | kΩ | VCE = 1V, IC = 10mA, f = 1kHz | 3 | ||
| Voltage Feedback Ratio | hRE | 0.1 | x 10-4 | 3 | |||
| Voltage Feedback Ratio | hRE | 10 | x 10-4 | 3 | |||
| Small Signal Current Gain | HFE | 100 | 3 | ||||
| Small Signal Current Gain | HFE | 400 | 3 | ||||
| Output Admittance | hOE | 3 | S | 3 | |||
| Output Admittance | hOE | 60 | S | 3 | |||
| Current Gain-Bandwidth Product | fT | 300 | MHz | VCE = -20V, IC = -10mA, f = 100MHz | 3 | ||
| Delay Time | td | 35 | ns | VCC = -3V, IC = -10mA, IB1 = -1mA, VBE(off) = 0.5V | 3 | ||
| Rise Time | tr | 35 | ns | VCC = -3V, IC = -10mA, IB1 = -1mA, VBE(off) = 0.5V | 3 | ||
| Storage Time | ts | 225 | ns | VCC = -3V, IC = -10mA, IB1 = IB2 = -1mA | 3 | ||
| Fall Time | tf | 75 | ns | VCC = -3V, IC = -10mA, IB1 = IB2 = -1mA | 3 | ||
| Collector-Base Voltage | VCBO | -40 | V | 2 | |||
| Collector-Emitter Voltage | VCEO | -40 | V | 2 | |||
| Emitter-Base Voltage | VEBO | -5 | V | 2 | |||
| Collector Current | IC | -200 | mA | 2 | |||
| Power Dissipation | Pd | 200 | mW | Note 5: collector lead on minimum recommended pad layout, 1oz copper, single-sided 1.6mm FR4, still air | 2 | ||
| Thermal Resistance, Junction to Ambient | RJA | 625 | °C/W | Note 5: collector lead on minimum recommended pad layout, 1oz copper, single-sided 1.6mm FR4, still air | 2 | ||
| Operating and Storage Temperature Range | Tj, TSTG | -55 | 150 | °C | 2 | ||
| Electrostatic Discharge - Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A | 2 | ||
| Electrostatic Discharge - Machine Model | ESD MM | 400 | V | JEDEC Class C | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish - Matte Tin Plated Leads. Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
MMST3906-7-F - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SOT-323 (KiCad packages3D, STEP)
- 3D model files:
mmst3906-7-f-etched.step/mmst3906-7-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mmst3906-7-f.step/mmst3906-7-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (6 pp, sha256
b63f770e4cb3d2da, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).