component
DRV8833PWR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV8833PWR
Texas Instruments · Stepper Motor Driver · TSSOP-16
DRV8833PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | nSLEEP | input | Sleep mode input; logic high to enable device, logic low to enter low-power sleep mode and reset all internal logic with internal pulldown. |
| 2 | AOUT1 | output | Bridge A output 1 to drive motor winding. |
| 3 | AISEN | bidirectional | Bridge A ground / current sense; connect to current sense resistor or GND if current control not needed. |
| 4 | AOUT2 | output | Bridge A output 2 to drive motor winding. |
| 5 | BOUT2 | output | Bridge B output 2 to drive motor winding. |
| 6 | BISEN | bidirectional | Bridge B ground / current sense; connect to current sense resistor or GND if current control not needed. |
| 7 | BOUT1 | output | Bridge B output 1 to drive motor winding. |
| 8 | nFAULT | tri_state | Open-drain fault output; logic low when in fault condition such as overtemperature or overcurrent. |
| 9 | BIN1 | input | Bridge B input 1 to control state of BOUT1 with internal pulldown. |
| 10 | BIN2 | input | Bridge B input 2 to control state of BOUT2 with internal pulldown. |
| 11 | VCP | bidirectional | High-side gate drive voltage; connect 0.01-μF 16-V minimum X7R ceramic capacitor to VM. |
| 12 | VM | power_in | Motor supply voltage (2.7 to 10.8 V); bypass with 10-μF minimum ceramic capacitor to GND. |
| 13 | GND | power_in | Device ground; both GND pin and device PowerPAD must be connected to ground. |
| 14 | VINT | bidirectional | Internal supply bypass voltage; bypass to GND with 2.2-μF 6.3-V ceramic capacitor. |
| 15 | AIN2 | input | Bridge A input 2 to control state of AOUT2 with internal pulldown. |
| 16 | AIN1 | input | Bridge A input 1 to control state of AOUT1 with internal pulldown. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DRV8833PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
drv8833pwr-etched.step/drv8833pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv8833pwr.step/drv8833pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
3e400e333f08f1b9, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).