3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRAA2142204GP3#JA0
RENESAS · Linear Voltage Regulators (LDO) · TSOT-23-5
RAA2142204GP3#JA0 from RENESAS, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Analog input supply voltage and positive supply for the linear regulator (recommended supply range 2.5V to 20V); decouple to GND with a 0.1µF or larger high-frequency ceramic capacitor. |
| 2 | GND | power_in | Ground reference for the regulator. |
| 3 | EN | input | Enable input: drive high to turn the linear regulator on and low to turn it off (recommended range 0 to +20V); it can be connected to VIN for automatic turn-on. |
| 4 | ADJ | input | Adjustable pin regulated at the 1.2266V internal band gap voltage; connect to an external resistor divider between VOUT and GND to set the output, and shorting it to VOUT sets the minimum 1.2266V output. |
| 5 | VOUT | power_out | Regulated output voltage pin (up to 150mA); requires a minimum 1µF X5R/X7R output capacitor between VOUT and GND placed as close to the regulator output as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VIN | VIN | -0.3 | 22 | V | All voltages referenced to VSS | 4 | |
| Enable Input Voltage, EN | EN | -0.3 | 22 | V | All voltages referenced to VSS | 4 | |
| Output Voltage, VOUT | VOUT | -0.3 | 22 | V | All voltages referenced to VSS | 4 | |
| Adjustable Pin Voltage, ADJ | ADJ | -0.3 | 5.5 | V | All voltages referenced to VSS | 4 | |
| Output Current, IOUT | IOUT | 150 | mA | 4 | |||
| Maximum Junction Temperature | -40 | 150 | °C | 4 | |||
| Maximum Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Supply Voltage, VIN | VIN | 2.5 | 20 | V | 5 | ||
| Enable Input Voltage, EN | EN | 0 | 20 | V | 5 | ||
| Output Voltage, VOUT | VOUT | 0 | 18 | V | 5 | ||
| Adjustable Pin Voltage, ADJ | ADJ | 0 | 5 | V | 5 | ||
| Output Current, IOUT | IOUT | 0 | 150 | mA | 5 | ||
| Output Capacitor, COUT | COUT | 1 | 200 | µF | 5 | ||
| Junction Temperature | -40 | 125 | °C | 5 | |||
| Output Voltage | VOUT | 1.2 | 18 | V | 5 | ||
| Input Voltage | VIN | 2.5 | 20 | V | 5 | ||
| Reference Voltage Accuracy | VREF | -1.5 | 1.5 | % | VIN = 2.5V to 20V, 25°C | 5 | |
| Reference Voltage Accuracy | VREF | -2 | 2 | % | -40°C to 125°C | 5 | |
| Line Regulation | ∆VOUT%/∆VIN | 0.02 | 0.05 | %/V | VIN = VOUT+1V to 20V | 5 | |
| Dropout Voltage | VDO | 225 | 450 | mV | IOUT = 150 mA, VOUT = 3.3V | 5 | |
| Shutdown Current | ISHDN | 6 | 10 | µA | EN = 0, VIN = 20V | 5 | |
| Ground Current | IGND | 120 | 180 | µA | IOUT = 150mA | 5 | |
| EN Rising Threshold | 1.35 | 1.5 | 1.65 | V | 6 | ||
| Short-Circuit Current Limit | 180 | 220 | 275 | mA | VIN = 5V | 6 | |
| Reference Voltage | VREF | 1.2266 | V | 5 | |||
| Dropout Voltage | VDO | 15 | mV | IOUT = 10 mA, VOUT = 3.3V | 5 | ||
| Dropout Voltage | VDO | 145 | mV | IOUT = 100 mA, VOUT = 3.3V | 5 | ||
| Shutdown Current | ISHDN | 2 | µA | EN = 0, VIN = 2.5V | 5 | ||
| Ground Current | IGND | 38 | µA | IOUT = 0 | 5 | ||
| Ground Current | IGND | 80 | µA | IOUT = 10mA | 5 | ||
| Load Regulation | ∆VOUT%/∆IOUT | 0.0033 | %/mA | IOUT = 100uA to 150mA, VIN = 5V | 5 | ||
| Power Supply Ripple Rejection | PSRR | 92 | dB | f = 100Hz, IOUT = 10mA, VIN = 6V, VOUT = 5V | 5 | ||
| Power Supply Ripple Rejection | PSRR | 63 | dB | f = 10kHz, IOUT = 10mA, VIN = 6V, VOUT = 5V | 5 | ||
| Power Supply Ripple Rejection | PSRR | 37 | dB | f = 100kHz, IOUT = 10mA, VIN = 6V, VOUT = 5V | 5 | ||
| Output Voltage Noise | 150 | µVRMS | BW = 10Hz to 100kHz, IOUT = 10mA, VADJ = VOUT, COUT = 10µF | 5 | |||
| EN Falling Threshold | 1.3 | V | 6 | ||||
| EN Leakage Current | 2 | µA | EN = 20V | 6 | |||
| Thermal Shutdown | 159 | °C | 6 | ||||
| Thermal Shutdown Hysteresis | 23 | °C | 6 | ||||
| Junction-to-ambient thermal resistance, TSOT23 | θJA | 215 | °C/W | Typical; free air, high-effective thermal conductivity test board (TB379) | 4 | ||
| Junction-to-case thermal resistance (top), TSOT23 | θJC | 140 | °C/W | Case temperature at top side of package | 4 |
CAD (KiCad official)
- Symbol:
RAA2142204GP3#JA0 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
raa2142204gp3-ja0-etched.step/raa2142204gp3-ja0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa2142204gp3-ja0.step/raa2142204gp3-ja0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (14 pp, sha256
80945c70b2a6f2b7, retrieved 2026-10-25, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).