Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3232EEWE+T

Analog Devices Inc./Maxim Integrated · RS232 ICs · SOIC-16-300mil

MAX3232EEWE+T from Analog Devices Inc./Maxim Integrated, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor C1; the charge pump requires 0.1µF capacitors for 3.3V operation and values must not be lower than Table 2.
2 V+ power_out Charge-pump output of +5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor C1.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor C2.
5 C2- passive Negative terminal of the inverting charge-pump capacitor C2.
6 V- power_out Charge-pump output of -5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range.
7 T2OUT output RS-232 transmitter 2 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed.
8 R2IN input RS-232 receiver 2 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ.
9 R2OUT output TTL/CMOS receiver 2 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA.
10 T2IN input TTL/CMOS transmitter 2 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup.
11 T1IN input TTL/CMOS transmitter 1 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup.
12 R1OUT output TTL/CMOS receiver 1 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA.
13 R1IN input RS-232 receiver 1 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ.
14 T1OUT output RS-232 transmitter 1 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage, +3.0V to +5.5V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-16-300mil
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Power-Supply Current 0.3 1 mA No load, VCC = 3.3V or 5.0V, TA = +25°C 2
Input Logic Threshold Low 0.8 V (Note 3) T_IN, EN, SHDN, MBAUD 2
Input Logic Threshold High 2 V VCC = 3.3V (Note 3) 2
Input Logic Threshold High 2.4 V VCC = 5.0V (Note 3) 2
Input Leakage Current -1 0.01 1 µA T_IN, EN, SHDN, MBAUD 2
Output Leakage Current (receiver outputs) -10 0.05 10 µA Receivers disabled 2
Output Voltage Low 0.4 V IOUT = 1.6mA 2
Receiver Input Voltage Range -25 25 V 2
Input Threshold Low 0.6 1.2 V TA = +25°C; VCC = 3.3V 2
Input Threshold Low 0.8 1.5 V TA = +25°C; VCC = 5.0V 2
Input Threshold High 1.5 2.4 V TA = +25°C; VCC = 3.3V 2
Input Threshold High 1.8 2.4 V TA = +25°C; VCC = 5.0V 2
Input Resistance 3 5 7 kΩ TA = +25°C 3
Output Voltage Swing -5 5.4 V All transmitter outputs loaded with 3kΩ to ground 3
Output Resistance 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 3
Output Resistance 10 MΩ VCC = V+ = V- = 0V, VOUT = ±2V 3
Output Short-Circuit Current -35 60 mA 3
Output Leakage Current (transmitter outputs) -25 25 µA VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled 3
Maximum Data Rate 120 235 kbps RL = 3kΩ, CL = 1000pF, one transmitter switching 3
Receiver Output Enable Time 200 ns Normal operation 3
Receiver Output Disable Time 200 ns Normal operation 3
Transmitter Skew / tPHL - tPLH / 300 ns 3
Receiver Skew / tPHL - tPLH / 300 ns 3
Transition-Region Slew Rate 6 30 V/µs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF 3
Transition-Region Slew Rate 4 30 V/µs VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF 3
Supply voltage VCC (table header range) VCC 3 5.5 V 2
Operating temperature range, MAX32_ E _ (this E-grade part) TA -40 85 °C MAX32_ E _ 2
Required minimum charge-pump capacitor C1 C1 0.1 µF VCC = 3.0V to 3.6V 9
Required minimum charge-pump capacitors C2, C3, C4 C2, C3, C4 0.1 µF VCC = 3.0V to 3.6V 9
Required minimum charge-pump capacitor C1 C1 0.047 µF VCC = 4.5V to 5.5V 9
Required minimum charge-pump capacitors C2, C3, C4 C2, C3, C4 0.33 µF VCC = 4.5V to 5.5V 9
Required minimum charge-pump capacitors C2, C3, C4 C2, C3, C4 0.47 µF VCC = 3.0V to 5.5V 9
VCC supply voltage (absolute maximum) VCC -0.3 6 V 2
V+ (absolute maximum) V+ -0.3 7 V Note 1 2
V- (absolute maximum) V- -7 0.3 V Note 1 2
V+ + V- (absolute maximum) V+ + V- 13 V Note 1 2
Input voltage T_IN, SHDN, EN (absolute maximum) -0.3 6 V 2
R_IN input voltage (absolute maximum) R_IN -25 25 V 2
T_OUT output voltage (absolute maximum) T_OUT -13.2 13.2 V 2
Storage temperature range -65 150 °C 2
Lead temperature (soldering) 300 °C soldering, 10s 2
Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) θJA 105 °C/W Single layer board 16
Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) θJC 22 °C/W Single layer board 16
Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) θJA 71 °C/W Multi layer board 16
Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) θJC 23 °C/W Multi layer board 16

CAD (KiCad official)

  • Symbol: MAX3232EEWE+T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: max3232eewe-t-etched.step / max3232eewe-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232eewe-t.step / max3232eewe-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256 6179886183cdd63b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF