3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHSN65LBC184DRG4
HXY MOSFET · RS-485/RS-422 ICs · SOP-8
HSN65LBC184DRG4 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver data output (RO), logic high when inputs are open or shorted (fail-safe), high-Z when /RE is high. |
| 2 | RE | input | Active-LOW receiver enable; driving it high disables the receiver output (high-Z, or shutdown when DE is also low). |
| 3 | DE | input | Active-HIGH driver enable; input high level is at least 2.0 V and low level is at most 0.8 V. |
| 4 | D | input | Driver data input (DI); input high level is at least 2.0 V and low level is at most 0.8 V. |
| 5 | GND | power_in | Local device ground reference. |
| 6 | A | bidirectional | Bus input/output, driver output or receiver input (complementary to B), with a rated voltage range of -8 V to +13 V. |
| 7 | B | bidirectional | Bus input/output, driver output or receiver input (complementary to A), with a rated voltage range of -8 V to +13 V. |
| 8 | VCC | power_in | Supply pin, 4.75 V to 5.25 V supply per pin table, absolute maximum +7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 7 | V | 2 | |||
| Control Input Voltage | /RE, DE | -0.3 | V | -0.3 to VCC+0.3 | 2 | ||
| Transmitter Input Voltage | DI | -0.3 | V | -0.3 to VCC+0.3 | 2 | ||
| Transmitter Output Voltage | A, B | -8 | 13 | V | 2 | ||
| Receiver Input Voltage | A, B | -8 | 13 | V | 2 | ||
| Receiver Output Voltage | RO | -0.3 | V | -0.3 to VCC+0.3 | 2 | ||
| Operating Temperature | -25 | 85 | ℃ | 2 | |||
| Power Supply | Vcc | 4.5 | 5.5 | V | 3 | ||
| Differential Driver Output | VOD2 | 1.5 | V | Figure 1, R = 27 Ω | 3 | ||
| Change in Magnitude of Differential Output Voltage | ∆VOD | 0.2 | V | Figure 1, R = 27 Ω | 3 | ||
| Change in Magnitude of Common-Mode Output Voltage | ∆VOC | 0.2 | V | Figure 1, R = 27 Ω | 3 | ||
| Input High Voltage | VIH1 | 2 | V | DE, DI, /RE | 3 | ||
| Input Low Voltage | VIL1 | 0.8 | V | DE, DI, /RE | 3 | ||
| DI Input Hysteresis | VHYS | 100 | mV | 3 | |||
| Input Current (A and B) | IIN4 | 125 | µA | DE = GND, VCC = GND or 5.25V, VIN = 12 V | 3 | ||
| Input Current (A and B) | IIN4 | -75 | µA | DE = GND, VCC = GND or 5.25V, VIN = -7 V | 3 | ||
| Driver Short-Circuit Output Current | IOSD | -100 | mA | -7V ≦ VOUT ≦ VCC | 3 | ||
| Driver Short-Circuit Output Current | IOSD | 100 | mA | 0V ≦ VOUT ≦ 12V | 3 | ||
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≦ VCM ≦ 12V | 3 |
| Receive Input Hysteresis | △VTH | 40 | mV | 3 | |||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 4 mA, VID = -200 mV | 3 | ||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0.4V ≦ VO ≦ 2.4V | 3 | |
| Receive Input Resistance | RIN | 96 | kΩ | -7V ≦ VCM ≦ 12V | 3 | ||
| Supply Current | ICC | 150 | 600 | µA | No load; /RE = DI = GND or VCC, DE = VCC | 3 | |
| Supply Current | ICC | 185 | 600 | µA | No load; /RE = DI = GND or VCC, DE = GND | 3 | |
| Supply Current in Shutdown Mode | ISHDN | 10 | µA | DE = GND, /RE = VCC, DI = VCC or GND | 3 | ||
| Driver Input to Output (low-to-high) | TDPLH | 450 | 800 | ns | Figure 3 and 5, RDIFF = 54 Ω, CL1 = CL2 = 100 pF | 4 | |
| Driver Input to Output (high-to-low) | TDPHL | 450 | 800 | ns | Figure 3 and 5, RDIFF = 54 Ω, CL1 = CL2 = 100 pF | 4 | |
| Driver Output Skew /TDPLH, TDPHL/ | TDSKEW | 100 | ns | Figure 3 and 5, RDIFF = 54 Ω, CL1 = CL2 = 100 pF | 4 | ||
| Driver Rise or Fall Time | TDR, TDF | 150 | 500 | ns | Figure 3 and 5, RDIFF = 54 Ω, CL1 = CL2 = 100 pF | 4 | |
| Maximum Data Rate | FMAX | 500 | kbps | 4 | |||
| Driver Enable to Output High | TDZH | 200 | ns | Figure 4 and 6, CL = 100 pF, S2 | 4 | ||
| Driver Enable to Output Low | TDZL | 200 | ns | Figure 4 and 6, CL = 100 pF, S1 | 4 | ||
| Driver Disable Time from Low | TDLZ | 300 | ns | Figure 4 and 6, CL = 15 pF, S1 | 4 | ||
| Driver Disable Time from High | TDHZ | 300 | ns | Figure 4 and 6, CL = 15 pF, S2 | 4 | ||
| Receiver Input to Output | TRPLH, TRPHL | 450 | 800 | ns | Figure 7 and 9, /VID/ ≥ 2.0V, rise and fall time of VID≦15ns | 4 | |
| Differential Receiver Skew /TRPLH, TRPHL/ | TRSKD | 30 | ns | Figure 7 and 9, /VID/ ≥ 2.0V, rise and fall time of VID≦15ns | 4 | ||
| Receiver Enable to Output Low | TRZL | 20 | 50 | ns | Figure 2 and 8, CL = 100 pF, S1 | 4 | |
| Receiver Enable to Output High | TRZH | 20 | 50 | ns | Figure 2 and 8, CL = 100 pF, S2 Closed | 4 | |
| Receiver Disable Time from Low | TRLZ | 80 | 150 | ns | Figure 2 and 8, CL = 100 pF, S1 Closed | 4 | |
| Receiver Disable Time from High | TRHZ | 80 | 150 | ns | Figure 2 and 8, CL = 100 pF, S2 Closed | 4 | |
| Time to Shutdown | TSHDN | 50 | 300 | ns | 4 | ||
| Driver Enable from Shutdown to Output High | TDZH(SHDN) | 200 | ns | Figure 4 and 6, CL = 15 pF, S2 Closed | 4 | ||
| Driver Enable from Shutdown to Output Low | TDZL(SHDN) | 200 | ns | Figure 4 and 6, CL = 15 pF, S1 Closed | 4 | ||
| Receiver Enable from Shutdown to Output High | TRZH(SHDN) | 300 | ns | Figure 2 and 8, CL = 100 pF, S2 Closed | 4 | ||
| Receiver Enable from Shutdown to Output Low | TRZL(SHDN) | 300 | ns | Figure 2 and 8, CL = 100 pF, S1 Closed | 4 |
CAD (KiCad official)
- Symbol:
HSN65LBC184DRG4 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hsn65lbc184drg4-etched.step/hsn65lbc184drg4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hsn65lbc184drg4.step/hsn65lbc184drg4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
8cfaceaec22739df, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).