component
XL5532
Public Made by Adomby adom
XINLUDA Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL5532
XINLUDA · Operational Amplifier · SOIC-8
XL5532 from XINLUDA, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; the output may be shorted to ground or either supply for an unlimited duration. |
| 2 | 1IN- | input | Inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage magnitude. |
| 3 | 1IN+ | input | Noninverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage magnitude. |
| 4 | VCC- | power_in | Negative supply; recommended range is -5 V to -15 V, with an absolute maximum of -22 V. |
| 5 | 2IN+ | input | Noninverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage magnitude. |
| 6 | 2IN- | input | Inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage magnitude. |
| 7 | 2OUT | output | Output of amplifier 2; the output may be shorted to ground or either supply for an unlimited duration. |
| 8 | VCC+ | power_in | Positive supply; recommended range is 5 V to 15 V, with an absolute maximum of 22 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.7 | 6 | mV | VO = 0, TA = 25°C | 4 | |
| Input offset voltage | VIO | 9 | mV | TA = Full range | 4 | ||
| Input offset current | IIO | 25 | 200 | nA | TA = 25°C | 4 | |
| Input offset current | IIO | 270 | nA | TA = Full range | 4 | ||
| Input bias current | IIB | 200 | 1000 | nA | TA = 25°C | 4 | |
| Input bias current | IIB | 1200 | nA | TA = Full range | 4 | ||
| Common-mode input-voltage range | VICR | 12 | 13 | V | 4 | ||
| Maximum peak-to-peak output-voltage swing | VOPP | 22 | 24 | V | RL ≥ 600 Ω, VCC± = ±15 V | 4 | |
| Large-signal differential-voltage amplification | AVD | 15 | 50 | V/mV | RL ≥ 600 Ω, VO = ±10 V, TA = 25°C | 4 | |
| Large-signal differential-voltage amplification | AVD | 10 | V/mV | RL ≥ 600 Ω, VO = ±10 V, TA = Full range | 4 | ||
| Large-signal differential-voltage amplification | AVD | 25 | 100 | V/mV | RL ≥ 2 kΩ, VO ±10 V, TA = 25°C | 4 | |
| Large-signal differential-voltage amplification | AVD | 15 | V/mV | RL ≥ 2 kΩ, VO ±10 V, TA = Full range | 4 | ||
| Input resistance | ri | 30 | 300 | kΩ | 4 | ||
| Common-mode rejection ratio | CMRR | 70 | 100 | dB | VIC = VICR min | 4 | |
| Supply-voltage rejection ratio (ΔVCC±/ΔVIO) | kSVR | 80 | 100 | dB | VCC± = ±9 V to ±15 V, VO = 0 | 4 | |
| Output short-circuit current | IOS | 10 | 35 | mA | 4 | ||
| Total supply current | ICC | 8 | 20 | mA | VO = 0, No load | 4 | |
| Input voltage, either input | VCC+ supply voltage | 0 | 22 | V | 3 | ||
| Supply voltage | VCC- | -22 | 0 | V | 3 | ||
| Input current | -10 | 10 | mA | 3 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature range | Tstg | -50 | 150 | °C | 3 | ||
| Supply voltage | VCC+ | 5 | 15 | V | 3 | ||
| Supply voltage | VCC- | -5 | -15 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | XL5532 | 3 | |
| Junction-to-ambient thermal resistance | RθJA | 105 | °C/W | SOP 8 pins | 3 | ||
| Small-signal differential-voltage amplification | Avd | 2.2 | V/mV | f = 10 kHz | 4 | ||
| Maximum output-swing bandwidth | BOM | 140 | kHz | RL = 600 Ω, VO = ±10 V | 4 | ||
| Unity-gain bandwidth | B1 | 10 | MHz | RL = 600 Ω, CL = 100 pF | 4 | ||
| Output impedance | zo | 0.3 | Ω | AVD = 30 dB, RL = 600 Ω, f = 10 kHz | 4 | ||
| Crosstalk attenuation (VO1/VO2) | 110 | dB | VO1 = 10 V peak, f = 1 kHz | 4 | |||
| Slew rate at unity gain | SR | 8 | V/μs | 4 | |||
| Overshoot factor | 10 | % | VI = 100 mV, RL = 600 Ω, AVD = 1, CL = 100 pF | 4 | |||
| Equivalent input noise voltage | Vn | 8 | nV/√Hz | f = 30 Hz | 4 | ||
| Equivalent input noise voltage | Vn | 5 | nV/√Hz | f = 1 kHz | 4 | ||
| Equivalent input noise current | In | 2.7 | pA/√Hz | f = 30 Hz | 4 | ||
| Equivalent input noise current | In | 0.7 | pA/√Hz | f = 1 kHz | 4 |
CAD (KiCad official)
- Symbol:
XL5532 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xl5532-etched.step/xl5532-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl5532.step/xl5532.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (9 pp, sha256
6b9e0bcfd5c23dac, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).