Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

L6981NDR

STMicroelectronics · DC-DC Converters · SO-8

L6981NDR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching node output for the internal power stage.
2 BOOT output Bootstrap capacitor pin; connect 100 nF external capacitor between BOOT and SW to supply high-side gate drive voltage.
3 VCC power_in Analog power supply input; connect ≥1 µF ceramic capacitor to filter voltage reference.
4 VOUT/FB input Feedback input for adjustable versions; use external resistor divider to set output voltage to 0.85 V nominal reference.
5 EN/CLKIN input Enable input; enable rising threshold 1.08-1.32 V (typical 1.2 V), disable falling threshold ~1.0 V; in LNM versions also accepts external clock (200-500 kHz) for synchronization.
6 AGND power_in Analog ground reference.
7 VIN power_in DC input voltage supply; operating range 3.5 V to 38 V.
8 PGND power_in Power ground reference.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Maximum pin voltage VIN -0.3 42 V 5
PGND to AGND Maximum pin voltage PGND to AGND -0.3 0.3 V 5
VCC Maximum pin voltage VCC -0.3 V 5
VOUT/FB Maximum pin voltage VOUT/FB -0.3 8 V 5
EN Maximum pin voltage EN -0.3 V 5
SW Maximum pin voltage SW -0.85 V 5
SW Maximum pin voltage (transient) SW -3.9 V for 0.5 ns 5
High-side / Low-side RMS switch current IHS, ILS 1.5 A RMS switch current 5
Operating temperature range (junction) TJ -40 150 °C 5
Storage temperature range TSTG -65 150 °C 5
Lead temperature TLEAD 260 °C soldering 10 sec. 5
Operating input voltage range VIN 3.5 38 V 6
VCC rising threshold VINH 2.3 3.3 V 6
VCC UVLO falling threshold VINL 2.15 3.15 V 6
Peak current limit IPK 2 2.3 A No slope contribution 6
Peak current limit IPK 1.55 1.8 A Full slope contribution 6
Valley current limit IVY 1.7 2 2.3 A 6
Reverse current limit IVY_SINK 1.25 1.5 1.75 A LNM or VOUT overvoltage 6
Switching frequency FSW 360 400 440 KHz 6
Shutdown current from VIN ISHTDWN 2 3 μA EN = GND 6
Quiescent current from VIN (LNM device) IQ_VIN 1.6 2.3 3 mA ADJ part number 6
VCC LDO output voltage VCC 3 3.3 3.6 V 6
Enable threshold VEN 1.08 1.2 1.32 V Rising 6
Internal soft-start TSS 1 1.3 1.6 ms 6
Voltage feedback (adjustable version) VFB 0.845 0.85 0.855 V Adjustable version TJ = 25 °C 6
Voltage feedback (adjustable version) VFB 0.842 0.85 0.858 V Adjustable version TJ = -40 °C ≤ TJ ≤ 125 °C 6
Overvoltage trip (VOVP/VREF) VOVP 115 120 125 % 7
Overvoltage hysteresis VOVP_HYST 1 2 6 % 7
Synchronization range fCLKIN 200 500 KHz LNM versions only 7
Synchronization pulse ON and OFF time VCLKIN_T 60 ns 2.3 ≤ VCLKIN_TH ≤ 2.5 V 7
Synchronization pulse ON and OFF time VCLKIN_T 20 ns VCLKIN_TH > 2.5 V 7
Thermal shutdown temperature TSHDWN 165 °C 7
Thermal shutdown hysteresis THYS 30 °C 7
Thermal resistance junction ambient RthJA 65 °C/W device soldered on the STMicroelectronics 2Layer 2-Oz Cu demonstration board 5
High-side RDSON RDSON_HS 0.175 Ω 6
Low-side RDSON RDSON_LS 0.125 Ω 6
Minimum OFF time TOFF_MIN 185 ns 6
Minimum ON time TON_MIN 85 ns 6
Wakeup threshold VWAKE_UP 0.7 V Rising 6
Wakeup threshold VWAKE_UP 0.2 V Falling 6
Enable threshold hysteresis VEN 0.2 V Hysteresis 6
Amplitude of synchronization clock VCLKIN_TH 2.3 V 7

CAD (KiCad official)

  • Symbol: L6981NDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: l6981ndr-etched.step / l6981ndr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6981ndr.step / l6981ndr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (52 pp, sha256 17a8f3f2678e811a, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF