component
ADR361AUJZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage Reference, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADR361AUJZ-REEL7
Analog Devices · Voltage Reference · TSOT-23-5
ADR361AUJZ-REEL7 from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin; the datasheet marks it NC = NO CONNECT, so it is left unconnected. |
| 2 | GND | power_in | Ground reference pin for the device; the band gap is referenced to VOUT rather than ground, so ground noise is greatly attenuated at VOUT. |
| 3 | VIN | power_in | Supply input for the ADR361, which requires VIN of 2.8 V to 15 V and must be at least 300 mV above VOUT (dropout voltage), with an absolute maximum supply of 18 V. |
| 4 | VOUT | power_out | Precision 2.5 V reference output that can source up to +5 mA and sink up to −1 mA, and is designed to drive capacitive loads from 0 µF to 10 µF with a 0.1 µF ceramic recommended. |
| 5 | TRIM | passive | Trim terminal used to adjust the output voltage over a nominal range; resistor values must be chosen so the part's maximum current drive is not exceeded. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (A grade) | VOUT | 2.494 | 2.5 | 2.506 | V | A grade | 4 |
| Initial accuracy (A grade) | VOUTERR | -6 | 6 | mV | A grade | 4 | |
| Initial accuracy (A grade) | VOUTERR | -0.24 | 0.24 | % | A grade | 4 | |
| Temperature coefficient (A grade) | TCVOUT | 25 | ppm/°C | A grade, −40°C < TA < +125°C | 4 | ||
| Dropout voltage | VIN − VOUT | 300 | mV | 4 | |||
| Line regulation | ∆VOUT/∆VIN | 0.125 | mV/V | VIN = 2.8 V to 15 V, −40°C < TA < +125°C | 4 | ||
| Load regulation (sourcing) | ∆VOUT/∆ILOAD | 0.45 | mV/mA | ILOAD = 0 mA to 5 mA, −40°C < TA < +125°C, VIN = 3.5 V | 4 | ||
| Load regulation (sinking) | ∆VOUT/∆ILOAD | 1 | mV/mA | ILOAD = −1 mA to 0 mA, −40°C < TA < +125°C, VIN = 3.5 V | 4 | ||
| Quiescent current | IIN | 150 | 190 | μA | −40°C < TA < +125°C | 4 | |
| Voltage noise | eN p-p | 8.25 | μV p-p | f = 0.1 Hz to 10 Hz | 4 | ||
| Turn-on settling time | tR | 25 | μs | 4 | |||
| Long-term stability | ∆VOUT | 50 | ppm | 1000 hours | 4 | ||
| Output voltage hysteresis | ∆VOUT_HYS | 100 | ppm | 4 | |||
| Ripple rejection ratio | RRR | -70 | dB | fIN = 60 Hz | 4 | ||
| Short circuit to GND current | ISC | 25 | mA | VIN = 5 V | 4 | ||
| Short circuit to GND current | ISC | 30 | mA | VIN = 15 V | 4 | ||
| Supply voltage | VIN | 18 | V | 9 | |||
| Storage temperature range | TSTG | -65 | 125 | °C | 9 | ||
| Operating temperature range | TA | -40 | 125 | °C | 9 | ||
| Junction temperature range | TJ | -65 | 150 | °C | 9 | ||
| Lead temperature (soldering) | 300 | °C | 60 sec soldering | 9 | |||
| Thermal resistance, junction-to-ambient (5-lead TSOT) | θJA | 230 | °C/W | 9 | |||
| Thermal resistance, junction-to-case (5-lead TSOT) | θJC | 146 | °C/W | 9 | |||
| Input voltage range (specification range) | VIN | 2.8 | 15 | V | Specification input range for ADR361, TA = 25°C unless otherwise noted | 4 |
CAD (KiCad official)
- Symbol:
ADR361AUJZ-REEL7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
adr361aujz-reel7-etched.step/adr361aujz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr361aujz-reel7.step/adr361aujz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
82015c677016e40b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).