3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMP411AQDGKRQ1
Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm
TMP411AQDGKRQ1 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply, specified at 2.7V to 5.5V for TMP411-Q1 and 1.62V to 5.5V for TMP411D-Q1. |
| 2 | D+ | input | Positive connection to the remote temperature sensor, with an internal 65kHz filter on the D+ and D- inputs. |
| 3 | D− | input | Negative connection to the remote temperature sensor; D+ and D− must be connected together when no remote sensor is used to prevent meaningless fault warnings. |
| 4 | THERM | output | Thermal flag, active-low open-drain output that requires a pullup resistor to V+. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | ALERT/THERM2 | output | Alert output (reconfigurable as second thermal flag), active-low open-drain that requires a pullup resistor to V+. |
| 7 | SDA | bidirectional | Serial data line for SMBus, open-drain that requires a pullup resistor to V+. |
| 8 | SCL | input | Serial clock line for SMBus, open-drain that requires a pullup resistor to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Sensors |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| shell | copper | planes to shield them from extrinsic noise sources. Five-mil (0.127mm) PCB traces are recommended. 3. Minimize additional thermocouple junctions caused by copper-to-solder connections. If these juncti | 44 |
CAD (KiCad official)
- Symbol:
TMP411AQDGKRQ1 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tmp411aqdgkrq1-etched.step/tmp411aqdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp411aqdgkrq1.step/tmp411aqdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (60 pp, sha256
eafcef205685e57f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).