3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownREF3112AIDBZT
Texas Instruments · Voltage References · SOT-23-3
REF3112AIDBZT from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; VIN must be between VREF + 0.05 V and 5.5 V, and the REF3112 minimum supply is 1.8 V. |
| 2 | OUT | output | Reference output voltage (1.25 V for the REF3112), which can sink or source up to 10 mA of output current. |
| 3 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 1.2475 | 1.25 | 1.2525 | V | TA = 25°C, ILOAD = 0 mA, VIN = 5 V (REF3112) | 4 |
| Initial accuracy | -0.2 | 0.2 | % | TA = 25°C, ILOAD = 0 mA, VIN = 5 V | 4 | ||
| Output voltage temperature drift | dVOUT/dT | 5 | 15 | ppm/°C | TA = 0°C to 70°C | 5 | |
| Output voltage temperature drift | dVOUT/dT | 10 | 20 | ppm/°C | TA = -40°C to +125°C | 5 | |
| Line regulation | 20 | 65 | ppm/V | VREF + 0.05 ≤ VIN ≤ 5.5 V | 5 | ||
| Load regulation, sourcing | dVOUT/dILOAD | 10 | 30 | µV/mA | Sourcing 0 mA < ILOAD < 10 mA, VIN = VREF + 250 mV | 5 | |
| Load regulation, sinking | dVOUT/dILOAD | 20 | 50 | µV/mA | Sinking -10 mA < ILOAD < 0 mA, VIN = VREF + 100 mV | 5 | |
| Dropout voltage | VIN, VOUT | 5 | 50 | mV | TA = -40°C to +125°C | 5 | |
| Output current | ILOAD | -10 | 10 | mA | 5 | ||
| Quiescent current | IQ | 100 | 115 | µA | ILOAD = 0, TA = 25°C | 5 | |
| Quiescent current | IQ | 115 | 135 | µA | ILOAD = 0, TA = -40°C to +125°C | 5 | |
| Input voltage | VIN | 1.8 | 5.5 | V | REF3112 minimum supply 1.8 V (table prints VREF + 0.05) | 4 | |
| Load current | ILOAD | 25 | mA | 4 | |||
| Operating temperature | TA | -40 | 125 | °C | Free-air temperature range | 4 | |
| Supply voltage V+ to V- | 7 | V | 4 | ||||
| Operating temperature | -55 | 135 | °C | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human-body model | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged-device model | V(ESD) | -1000 | 1000 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 292.9 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 124.4 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 89 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 11.4 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 87.6 | °C/W | DBZ (SOT-23), 3 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
REF3112AIDBZT - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref3112aidbzt-etched.step/ref3112aidbzt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref3112aidbzt.step/ref3112aidbzt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
59479e32549cccbe, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).