Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP173GJ-Z

Monolithic Power Systems · AC-DC Controllers & Regulators · TSOT-23-5

MP173GJ-Z from Monolithic Power Systems, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Control circuit power supply; the recommended operating VCC range is 5.5 V to 5.7 V, and the internal regulator turns on below VCCON (5.1 V to 5.8 V typ./max range) and the IC stops below VCCstop (3 V to 3.6 V).
2 FB input Regulator feedback input that regulates to the 2.55 V reference, with open-loop detection below 0.5 V and the OLP feedback trigger at 1.64 V to 1.84 V.
3 SOURCE power_in Internal power MOSFET source and ground reference for VCC and FB; absolute maximum for all other pins is -0.3 V to 6.5 V.
4 SOURCE power_in Internal power MOSFET source and ground reference for VCC and FB, bonded in parallel with pin 3; absolute maximum for all other pins is -0.3 V to 6.5 V.
5 DRAIN power_in Internal power MOSFET drain and high-voltage current source input; DRAIN-to-SOURCE absolute maximum is -0.3 V to 700 V and breakdown V(BR)DSS is 700 V minimum at TJ = 25°C.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal regulator supply current Iregulator 2.2 4.1 6 mA VCC = 4 V; VDrain = 100 V 4
DRAIN leakage current ILeak 10 17 μA VCC = 5.8 V; VDrain = 400 V 4
Breakdown voltage V(BR)DSS 700 V TJ = 25°C 4
ON resistance Ron 14 18 Ω TJ = 25°C 4
ON resistance Ron 22 27 Ω TJ = 125°C 4
VCC level (increasing) where the internal regulator stops VCCOFF 5.4 5.7 6 V 4
VCC level (decreasing) where the internal regulator turns on VCCON 5.1 5.5 5.8 V 4
VCC regulator on and off hysteresis 130 250 mV 4
VCC level (decreasing) where the IC stops VCCstop 3 3.4 3.6 V 4
VCC level (decreasing) where the protection phase ends VCCpro 2 2.5 2.8 V 4
Internal IC consumption ICC 720 μA fs = 28 kHz, D = 67.8% 4
Internal IC consumption (no switching) ICC 200 µA 4
Internal IC consumption, latch-off phase ICCLATCH 16 24 μA VCC = 5.3 V 4
Peak current limit ILimit 380 420 460 mA TJ = 25°C 4
SCP threshold ISCP 500 600 760 mA TJ = 25°C 4
Minimum off time τminoff 9 12 15 μs 4
Maximum on time τmanon 17 24 31 μs 4
Primary MOSFET feedback turn-on threshold VFB 2.45 2.55 2.65 V 4
OLP feedback trigger threshold VFB_OLP 1.64 1.74 1.84 V 4
Open-loop detection VOLD 0.4 0.5 0.6 V 4
VCC operating range 5.5 5.7 V 3
Operating junction temperature TJ -40 125 °C 3
DRAIN to SOURCE voltage -0.3 700 V TJ = +25°C 3
All other pins voltage -0.3 6.5 V 3
Continuous power dissipation, TSOT23-5 PD 1 W TA = +25°C 3
Junction temperature TJ 150 °C 3
Lead temperature 260 °C 3
Storage temperature TSTG -60 150 °C 3
Junction-to-ambient thermal resistance, TSOT23-5 θJA 100 °C/W Measured on JESD51-7, 4-layer PCB 3
Junction-to-case thermal resistance, TSOT23-5 θJC 55 °C/W 3

CAD (KiCad official)

  • Symbol: MP173GJ-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mp173gj-z-etched.step / mp173gj-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp173gj-z.step / mp173gj-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (20 pp, sha256 e17a7089014cc769, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF