component
AMC1300BDWV
Public Made by Adomby adom
Texas Instruments Special Purpose Amplifiers, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAMC1300BDWV
Texas Instruments · Special Purpose Amplifiers · SOIC-8-300mil
AMC1300BDWV from Texas Instruments, in a SOIC-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | High-side power supply, referenced to GND1, with 3.0 V to 5.5 V recommended for AMC1300B (4.5 V to 5.5 V for AMC1300) and an absolute maximum of -0.3 V to 6.5 V. |
| 2 | INP | input | Noninverting analog input, with an absolute voltage range of GND1 - 6 V to VDD1 + 0.5 V and a differential input of ±250 mV full scale; INP or INN must have a DC current path to GND1 to define the common-mode input voltage. |
| 3 | INN | input | Inverting analog input, with an absolute voltage range of GND1 - 6 V to VDD1 + 0.5 V and a differential input of ±250 mV full scale; INP or INN must have a DC current path to GND1 to define the common-mode input voltage. |
| 4 | GND1 | power_in | High-side analog ground, the reference for VDD1 and the analog inputs INP and INN. |
| 5 | GND2 | power_in | Low-side analog ground, the reference for VDD2 and the analog outputs OUTP and OUTN. |
| 6 | OUTN | output | Inverting analog output, with an absolute voltage range of GND2 - 0.5 V to VDD2 + 0.5 V. |
| 7 | OUTP | output | Noninverting analog output, with an absolute voltage range of GND2 - 0.5 V to VDD2 + 0.5 V. |
| 8 | VDD2 | power_in | Low-side power supply, referenced to GND2, with 3 V to 5.5 V recommended (3.3 V typical) and an absolute maximum of -0.3 V to 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-300mil |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side power-supply voltage, VDD1 to GND1 | VDD1 | -0.3 | 6.5 | V | 5 | ||
| Low-side power-supply voltage, VDD2 to GND2 | VDD2 | -0.3 | 6.5 | V | 5 | ||
| Analog input voltage, INP, INN (min printed as GND1, 6) | -6 | V | 5 | ||||
| Output voltage, OUTP, OUTN (min printed as GND2, 0.5) | -0.5 | V | 5 | ||||
| Input current, continuous, any pin except power-supply pins | -10 | 10 | mA | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| High-side power supply, AMC1300B | VDD1 | 3 | 5 | 5.5 | V | VDD1 to GND1, AMC1300B row | 5 |
| Low-side power supply | VDD2 | 3 | 3.3 | 5.5 | V | VDD2 to GND2 | 5 |
| Differential input voltage before clipping output | VClipping | -320 | 320 | mV | VIN = VINP - VINN | 5 | |
| Specified linear differential full-scale voltage | VFSR | -250 | 250 | mV | VIN = VINP - VINN | 5 | |
| Absolute common-mode input voltage (max printed as VDD1) | -2 | V | (VINP+VINN)/2 to GND1 | 5 | |||
| Operating common-mode input voltage (max printed as VDD1, 2.1) | VCM | -0.16 | V | (VINP+VINN)/2 to GND1 | 5 | ||
| Specified ambient temperature, AMC1300B | TA | -55 | 125 | °C | AMC1300B | 5 | |
| Input offset voltage, 4.5 V ≤ VDD1 ≤ 5.5 V | VOS | -0.2 | 0.01 | 0.2 | mV | AMC1300B, initial, TA = 25°C, VINP = VINN = GND1 | 9 |
| Input offset voltage, 3.0 V ≤ VDD1 ≤ 5.5 V | VOS | -0.2 | 0.01 | 0.2 | mV | AMC1300B, initial, TA = 25°C, VINP = VINN = GND1 | 9 |
| Input offset drift | TCVOS | -0.9 | 0.1 | 0.9 | uV/°C | AMC1300B | 9 |
| Input bias current | IIB | -41 | -30 | -24 | uA | INP = INN = GND1; IIB = (IIBP+IIBN)/2 | 9 |
| Input offset current | IIO | -5 | 5 | nA | IIO = IIBP - IIBN | 9 | |
| Gain error, initial | EG | -0.3 | 0.05 | 0.3 | % | AMC1300B, initial, TA = 25°C | 9 |
| Gain error drift | TCEG | -30 | 5 | 30 | ppm/°C | AMC1300B | 9 |
| Nonlinearity | -0.03 | 0.01 | 0.03 | % | 9 | ||
| Signal-to-noise ratio | SNR | 81.5 | 85 | dB | fIN = 1 kHz, BW = 10 kHz | 9 | |
| Common-mode output voltage | VCMout | 1.39 | 1.44 | 1.49 | V | 9 | |
| Clipping differential output voltage | VCLIPout | -2.52 | 2.49 | 2.52 | V | VOUT = VOUTP - VOUTN; /VIN/ > /VClipping/ | 9 |
| Failsafe differential output voltage | VFAILSAFE | -2.63 | -2.57 | -2.53 | V | VCM ≥ VCMov, or VDD1 missing | 9 |
| Output bandwidth, AMC1300B | BWOUT | 250 | 310 | kHz | AMC1300B | 10 | |
| Output resistance | ROUT | 0.2 | Ω | On OUTP or OUTN | 10 | ||
| Common-mode transient immunity, AMC1300B | CMTI | 100 | 150 | kV/µs | /GND1, GND2/ = 1 kV, AMC1300B | 10 | |
| VDD1 undervoltage detection threshold voltage | VDD1UV | 2.4 | 2.6 | 2.8 | V | VDD1 falling | 10 |
| High-side supply current, AMC1300B | IDD1 | 6.3 | 8.5 | mA | AMC1300B only, 3.0 V ≤ VDD1 ≤ 3.6 V | 10 | |
| High-side supply current | IDD1 | 7.2 | 9.8 | mA | 4.5 V ≤ VDD1 ≤ 5.5 V | 10 | |
| Low-side supply current | IDD2 | 5.3 | 7.2 | mA | 3.0 V ≤ VDD2 ≤ 3.6 V | 10 | |
| Low-side supply current | IDD2 | 5.9 | 8.1 | mA | 4.5 V ≤ VDD2 ≤ 5.5 V | 10 | |
| VINx to VOUTx signal delay (50% - 10%), AMC1300B | 1 | 1.5 | µs | AMC1300B, unfiltered output | 11 | ||
| VINx to VOUTx signal delay (50% - 50%), AMC1300B | 1.6 | 2.1 | µs | AMC1300B, unfiltered output | 11 | ||
| VINx to VOUTx signal delay (50% - 90%), AMC1300B | 2.5 | 3 | µs | AMC1300B, unfiltered output | 11 | ||
| Maximum power dissipation (both sides) | PD | 99 | mW | VDD1 = VDD2 = 5.5 V | 6 | ||
| Maximum power dissipation (both sides) | PD | 57 | mW | VDD1 = VDD2 = 3.6 V, AMC1300B only | 6 | ||
| Maximum power dissipation (high-side) | PD1 | 54 | mW | VDD1 = 5.5 V | 6 | ||
| Maximum power dissipation (high-side) | PD1 | 31 | mW | VDD1 = 3.6 V, AMC1300B only | 6 | ||
| Maximum power dissipation (low-side) | PD2 | 45 | mW | VDD2 = 5.5 V | 6 | ||
| Maximum power dissipation (low-side) | PD2 | 26 | mW | VDD2 = 3.6 V | 6 | ||
| Safety input, output, or supply current | IS | 266 | mA | RθJA = 85.4°C/W, VDDx = 5.5 V, TJ = 150°C, TA = 25°C | 8 | ||
| Safety input, output, or supply current | IS | 407 | mA | RθJA = 85.4°C/W, VDDx = 3.6 V, TJ = 150°C, TA = 25°C | 8 | ||
| Safety input, output, or total power | PS | 1464 | mW | RθJA = 85.4°C/W, TJ = 150°C, TA = 25°C | 8 | ||
| Maximum safety temperature | TS | 150 | °C | 8 | |||
| Junction-to-ambient thermal resistance | RθJA | 85.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 26.8 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 43.5 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 4.8 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 41.2 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
AMC1300BDWV - Footprint:
Package_SO:SOIC-8_7.5x5.85mm_P1.27mm - 3D model: SOIC-8-300mil (KiCad packages3D, STEP)
- 3D model files:
amc1300bdwv-etched.step/amc1300bdwv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);amc1300bdwv.step/amc1300bdwv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
8fa1b809c573c2cf, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).