component
M95080-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95080-RMN6TP
STMicroelectronics · EEPROM · SOP-8
M95080-RMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; the device is selected when S is driven low, and a falling edge on S is required after power-up before any instruction. |
| 2 | Q | output | Serial Data Output, one of the SPI bus signals. |
| 3 | W | input | Write Protect input used for hardware write protection of the memory array. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | D | input | Serial Data Input, one of the SPI bus signals. |
| 6 | C | input | Serial Clock input for the SPI bus, with a high-speed clock of up to 20 MHz. |
| 7 | HOLD | input | Hold input; communications with the device can be interrupted when HOLD is driven low. |
| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for the M95080-R (absolute maximum 6.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95080-RMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95080-rmn6tp-etched.step/m95080-rmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95080-rmn6tp.step/m95080-rmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (44 pp, sha256
ad27eb94b57233e1, retrieved 2026-09-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).