Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1783T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28

PIC16F1783T-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only pin that carries the MCLR/VPP master clear function and supports interrupt-on-change, per the Table 2 allocation for the 28-pin SPDIP/SOIC/SSOP package.
2 RA0 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN0+/AN0-, comparator inputs C1IN0-, C2IN0- and C3IN0-.
3 RA1 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN1+/AN1-, comparator inputs C1IN1-, C2IN1- and C3IN1-, and op amp output OPA1OUT.
4 RA2 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN2+/AN2-, ADC negative reference VREF-, comparator inputs C1IN0+, C2IN0+ and C3IN0+, and DAC1OUT1/DAC1VREF-.
5 RA3 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN3+/AN3-, ADC positive reference VREF+ (software-selectable location), comparator input C1IN1+, and DAC1VREF+.
6 RA4 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C1OUT, op amp input OPA1IN+ and Timer0 clock input T0CKI.
7 RA5 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN4+/AN4-, comparator output C2OUT, op amp input OPA1IN- and SS.
8 VSS power_in Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 19).
9 RA7 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC reference VREF+, PSMC1CLK/PSMC2CLK and OSC1/CLKIN oscillator input.
10 RA6 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C2OUT and OSC2/CLKOUT oscillator output.
11 RC0 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and PSMC1A.
12 RC1 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator input T1OSI, PSMC1B and CCP2 (software-selectable location).
13 RC2 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1C and CCP1 (software-selectable location).
14 RC3 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1D and MSSP SCK/SCL (software-selectable location).
15 RC4 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1E and MSSP SDI/SDA (software-selectable location).
16 RC5 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1F and MSSP SDO (software-selectable location).
17 RC6 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2A and EUSART TX/CK (software-selectable location).
18 RC7 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2B and EUSART RX/DT (software-selectable location).
19 VSS power_in Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 8).
20 VDD power_in Positive supply pin; the datasheet gives an operating range of 2.3V to 5.5V for PIC16F1782/1783 and 1.8V to 3.6V for PIC16LF1782/1783.
21 RB0 bidirectional General-purpose I/O with interrupt-on-change, weak pull-up and external INT interrupt, multiplexed with ADC input AN12+/AN12-, comparator input C2IN1+, PSMC1IN/PSMC2IN and CCP1 (software-selectable location).
22 RB1 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN10+/AN10-, comparator inputs C1IN3-, C2IN3- and C3IN3-, and op amp output OPA2OUT.
23 RB2 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN8+/AN8-, op amp input OPA2IN- and CLKR.
24 RB3 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN9+/AN9-, comparator inputs C1IN2-, C2IN2- and C3IN2-, op amp input OPA2IN+ and CCP2 (software-selectable location).
25 RB4 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN11+/AN11- and comparator input C3IN1+.
26 RB5 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN13+/AN13-, comparator output C3OUT, Timer1 gate input T1G and SDO (software-selectable location).
27 RB6 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with EUSART TX/CK, MSSP SDI/SDA (software-selectable location) and ICSPCLK.
28 RB7 bidirectional General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with DAC1OUT2, EUSART RX/DT, MSSP SCK/SCL (software-selectable location) and ICSPDAT.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range (PIC16F1782/1783, non-LF) 2.3 5.5 V 2
Operating Speed, clock input (max) 32 MHz DC, 32 MHz clock input 1
Precision internal oscillator frequency tolerance -1 1 % Factory calibrated, typical 2

CAD (KiCad official)

  • Symbol: PIC16F1783T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: pic16f1783t-i-etched.step / pic16f1783t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1783t-i.step / pic16f1783t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (8 pp, sha256 cc0380cabfc01277, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF