Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RN7302

RENERGY · Energy Metering · LQFP-32(7x7)

RN7302 from RENERGY, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IAP input Phase A current sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
2 IAN input Phase A current sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
3 AGND power_in Analog ground.
4 IBP input Phase B current sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
5 IBN input Phase B current sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
6 AVCC power_in Analog +3.3V power supply, operating range 3.0V-3.6V; decouple with 10µF capacitor in parallel with 0.1µF capacitor to analog ground.
7 ICP input Phase C current sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
8 ICN input Phase C current sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
9 VAP input Phase A voltage sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
10 VAN input Phase A voltage sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
11 VBP input Phase B voltage sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
12 VBN input Phase B voltage sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
13 VCP input Phase C voltage sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
14 VCN input Phase C voltage sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
15 INP input Neutral line current sampling channel positive analog input; fully differential input with maximum peak-to-peak difference 800mVp.
16 INN input Neutral line current sampling channel negative analog input; fully differential input with maximum peak-to-peak difference 800mVp.
17 CF3 output Energy calibration pulse output; configurable via CFCFG register for fundamental/full-wave or active/reactive/apparent energy pulse output.
18 CF2 output Energy calibration pulse output; configurable via CFCFG register for fundamental/full-wave or active/reactive/apparent energy pulse output.
19 CF1 output Energy calibration pulse output; configurable via CFCFG register for fundamental/full-wave or active/reactive/apparent energy pulse output.
20 RSTN input Reset pin, active low; internal floating, requires external power or 1kΩ pull-up resistor.
21 DVCC power_in Digital +3.3V power supply, operating range 3.0V-3.6V; decouple with 10µF capacitor in parallel with 0.1µF capacitor to digital ground.
22 INTN output Interrupt output pin, active low; default high level, toggles when enabled interrupt events occur and returns to high when interrupt flags are cleared via SPI.
23 SDO output SPI serial data output; RN7302 outputs data on SCLK rising edge, high impedance when SCS_N is high.
24 SCLK input SPI serial clock input; synchronous clock for serial interface generated by MCU, MCU writes data at SCLK high level.
25 SCS_N input SPI chip select signal, active low.
26 SDI input SPI serial data input; data is valid at SCLK falling edge.
27 XO output Crystal oscillator output pin.
28 XI input Crystal oscillator input pin or external system clock input; typical frequency 8.192MHz with 10M resistor across to XO and 15pF load capacitance.
29 VO power_out Internal voltage regulator output; decouple with 10µF capacitor in parallel with 0.1µF capacitor to digital ground; do not connect external load.
30 DGND power_in Digital ground.
31 DVCC power_in Digital +3.3V power supply, operating range 3.0V-3.6V; decouple with 10µF capacitor in parallel with 0.1µF capacitor to digital ground.
32 REFV bidirectional Internal reference voltage output or external reference voltage input pin; decouple with 10µF capacitor in parallel with 0.1µF capacitor to analog ground.

Key specifications

Parameter Value
Manufacturer RENERGY
Package LQFP-32(7x7)
Category Data Acquisition
Pins 32

CAD (KiCad official)

  • Symbol: RN7302
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: rn7302-etched.step / rn7302-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rn7302.step / rn7302.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENERGY datasheet (70 pp, sha256 8e97676a4c6dcfee, retrieved 2026-09-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF