component
STM32F373RCT6TR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F373RCT6TR
STMicroelectronics · ST Microelectronics · LQFP-64(10x10)
STM32F373RCT6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply for the RTC and backup registers (VBAT supply). |
| 2 | PC13 | bidirectional | Standard 3.3 V I/O powered through the backup power switch, which sinks only 3 mA, so output speed is limited to 2 MHz at 30 pF and it must not be used as a current source such as an LED driver. |
| 3 | PC14/OSC32_IN | bidirectional | Standard 3.3 V I/O powered through the backup power switch (3 mA limit), also used as the 32 kHz oscillator input OSC32_IN, with output use limited to 2 MHz at 30 pF and no current sourcing. |
| 4 | PC15/OSC32_OUT | bidirectional | Standard 3.3 V I/O powered through the backup power switch (3 mA limit), also used as the 32 kHz oscillator output OSC32_OUT, with output use limited to 2 MHz at 30 pF and no current sourcing. |
| 5 | PF0/OSC_IN | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable), also serving as the HSE oscillator input OSC_IN and alternate function I2C2_SDA. |
| 6 | PF1/OSC_OUT | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable), also serving as the HSE oscillator output OSC_OUT and alternate function I2C2_SCL. |
| 7 | NRST | bidirectional | Active-low bidirectional device reset input and internal reset output with an embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN10 and TIM5_CH1_ETR functions. |
| 9 | PC1 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN11 and TIM5_CH2 functions. |
| 10 | PC2 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN12, SPI2_MISO/I2S2_MCK and TIM5_CH3 functions. |
| 11 | PC3 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN13, SPI2_MOSI/I2S2_SD and TIM5_CH4 functions. |
| 12 | VSSA/VREF- | power_in | Analog ground pin (named VSSA/VREF- in the pin table). |
| 13 | VDDA | power_in | Analog power supply for the ADC, comparators and DAC. |
| 14 | PA0 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN0, COMP1_INM, WKUP1 and TIM2_CH1_ETR/TIM5_CH1_ETR alternate functions. |
| 15 | PA1 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN1, COMP1_INP, RTC_REFIN and USART2_RTS functions. |
| 16 | PA2 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN2, COMP2_INM, COMP2_OUT and USART2_TX functions. |
| 17 | VREF+ | power_in | Positive reference voltage for the ADC, COMP and DAC. |
| 18 | PA3 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN3, COMP2_INP and USART2_RX functions. |
| 19 | VDD_2 | power_in | Digital power supply. |
| 20 | PA4 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN4, DAC1_OUT1, SPI1_NSS/I2S1_WS and TSC_G2_IO1 functions. |
| 21 | PA5 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN5, DAC1_OUT2, SPI1_SCK/I2S1_CK and CEC functions. |
| 22 | PA6 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN6, DAC2_OUT1, SPI1_MISO/I2S1_MCK and COMP1_OUT functions. |
| 23 | PA7 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN7, SPI1_MOSI/I2S1_SD, COMP2_OUT and TSC_G2_IO4 functions. |
| 24 | PC4 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN14, USART1_TX and TSC_G3_IO1 functions. |
| 25 | PC5 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN15, USART1_RX and TSC_G3_IO2 functions. |
| 26 | PB0 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN8, SDADC1_AIN6P, SPI1_MOSI/I2S1_SD and TIM3_CH3 functions. |
| 27 | PB1 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, with ADC_IN9, SDADC1_AIN5P, SDADC1_AIN6M and TIM3_CH4 functions. |
| 28 | PB2 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD12, with SDADC1_AIN4P and SDADC2_AIN6P functions. |
| 29 | PE8 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD12, with SDADC1_AIN8P and SDADC2_AIN8P functions. |
| 30 | PE9 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD12, with SDADC1_AIN7P, SDADC1_AIN8M, SDADC2_AIN7P and SDADC2_AIN8M functions. |
| 31 | VSSSD/VREFSD- | power_in | Ground for SDADC1, SDADC2 and SDADC3, also the external negative reference VREFSD- used in SDADC single-ended mode. |
| 32 | VDDSD | power_in | Power supply for SDADC1, SDADC2 and SDADC3. |
| 33 | VREFSD+ | power_in | External positive reference voltage for SDADC1, SDADC2 and SDADC3. |
| 34 | PB14 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD3, with SDADC3_AIN8P, SPI2_MISO/I2S2_MCK, USART3_RTS, TIM15_CH1 and TSC_G6_IO1 functions. |
| 35 | PB15 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD3, with SDADC3_AIN7P, SDADC3_AIN8M, SPI2_MOSI/I2S2_SD, TIM15_CH1N and RTC_REFIN functions. |
| 36 | PD8 | bidirectional | Standard 3.3 V I/O (TC) powered by VDDSD3, with SDADC3_AIN6P, SPI2_SCK/I2S2_CK, USART3_TX and TSC_G6_IO3 functions. |
| 37 | PC6 | bidirectional | 5 V tolerant FT I/O with TIM3_CH1 and SPI1_NSS/I2S1_WS functions. |
| 38 | PC7 | bidirectional | 5 V tolerant FT I/O with TIM3_CH2 and SPI1_SCK/I2S1_CK functions. |
| 39 | PC8 | bidirectional | 5 V tolerant FT I/O with TIM3_CH3 and SPI1_MISO/I2S1_MCK functions. |
| 40 | PC9 | bidirectional | 5 V tolerant FT I/O with TIM3_CH4 and SPI1_MOSI/I2S1_SD functions. |
| 41 | PA8 | bidirectional | 5 V tolerant FT I/O with MCO, I2C2_SMBA, USART1_CK, TIM4_ETR and TIM5_CH1_ETR functions. |
| 42 | PA9 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C2_SCL, USART1_TX, TIM15_BKIN and TSC_G4_IO1 functions. |
| 43 | PA10 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C2_SDA, USART1_RX, TIM17_BKIN and TSC_G4_IO2 functions. |
| 44 | PA11 | bidirectional | 5 V tolerant FT I/O with USB_DM, CAN_RX, USART1_CTS, COMP1_OUT and TIM4_CH1 functions. |
| 45 | PA12 | bidirectional | 5 V tolerant FT I/O with USB_DP, CAN_TX, USART1_RTS, COMP2_OUT and TIM16_CH1 functions. |
| 46 | PA13 | bidirectional | 5 V tolerant FT I/O with SWDIO-JTMS debug function, plus IR_OUT, USART3_CTS, SPI1_MISO/I2S1_MCK and TSC_G4_IO3 functions. |
| 47 | PF6 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C2_SCL, SPI1_MOSI/I2S1_SD, USART3_RTS and TIM4_CH4 functions. |
| 48 | PF7 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C2_SDA and USART2_CK functions. |
| 49 | PA14 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with SWCLK-JTCK debug function, I2C1_SDA, TIM12_CH1 and TSC_G4_IO4 functions. |
| 50 | PA15 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with JTDI debug function, I2C1_SCL, SPI1_NSS/I2S1_WS and TSC_SYNC functions. |
| 51 | PC10 | bidirectional | 5 V tolerant FT I/O with SPI3_SCK/I2S3_CK, USART3_TX and TIM19_CH1 functions. |
| 52 | PC11 | bidirectional | 5 V tolerant FT I/O with SPI3_MISO/I2S3_MCK, USART3_RX and TIM19_CH2 functions. |
| 53 | PC12 | bidirectional | 5 V tolerant FT I/O with SPI3_MOSI/I2S3_SD, USART3_CK and TIM19_CH3 functions. |
| 54 | PD2 | bidirectional | 5 V tolerant FT I/O with TIM3_ETR function. |
| 55 | PB3 | bidirectional | 5 V tolerant FT I/O with JTDO-TRACESWO debug function, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART2_TX and TSC_G5_IO1 functions. |
| 56 | PB4 | bidirectional | 5 V tolerant FT I/O with NJTRST debug function, SPI1_MISO/I2S1_MCK, SPI3_MISO/I2S3_MCK, USART2_RX and TSC_G5_IO2 functions. |
| 57 | PB5 | bidirectional | 5 V tolerant FT I/O with SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, I2C1_SMBA, USART2_CK and TIM17_CH1 functions. |
| 58 | PB6 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C1_SCL, USART1_TX, TIM15_CH1 and TSC_G5_IO3 functions. |
| 59 | PB7 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C1_SDA, USART1_RX, TIM15_CH2 and TSC_G5_IO4 functions. |
| 60 | BOOT0 | input | Dedicated BOOT0 input pin used for boot memory selection. |
| 61 | PB8 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C1_SCL, SPI2_SCK/I2S2_CK, USART3_TX, CAN_RX, CEC and COMP1_OUT functions. |
| 62 | PB9 | bidirectional | 5 V tolerant FTf I/O (Fast-mode Plus capable) with I2C1_SDA, SPI2_NSS/I2S2_WS, USART3_RX, CAN_TX, IR_OUT and COMP2_OUT functions. |
| 63 | VSS_1 | power_in | Ground. |
| 64 | VDD_1 | power_in | Digital power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDSDx, VBAT and VDD) | VDD-VSS | -0.3 | 4 | V | 55 | ||
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | 0.4 | V | 55 | |||
| Allowed voltage difference for VDDSDx > VDDA | VDDSDx, VDDA | 0.4 | V | 55 | |||
| Allowed voltage difference for VREFSD+ > VDDSD3 | VREFSD+, VDDSD3 | 0.4 | V | 55 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+, VDDA | 0.4 | V | 55 | |||
| Input voltage on TTa pins | VIN | 4 | V | 55 | |||
| Input voltage on TC pins on SDADCx channels inputs | VIN | 4 | V | 55 | |||
| Input voltage on any other pin | VIN | 4 | V | 55 | |||
| Variations between all the different ground pins | /VSSX - VSS/ | 50 | mV | 55 | |||
| Variations between VREFSD- and VSSx | /VREFSD- - VSSx/ | 50 | mV | 55 | |||
| Total current into sum of all VDD_x and VDDSDx power lines (source) | ΣIVDD | 160 | mA | 56 | |||
| Total current out of sum of all VSS_x and VSSSD ground lines (sink) | ΣIVSS | -160 | mA | 56 | |||
| Maximum current into each VDD_x or VDDSDx power pin (source) | IVDD(PIN) | 100 | mA | 56 | |||
| Maximum current out of each VSS_x or VSSSD ground pin (sink) | IVSS(PIN) | -100 | mA | 56 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 56 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | -25 | mA | 56 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 80 | mA | 56 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -80 | mA | 56 | |||
| Injected current on FT, FTf and B pins | IINJ(PIN) | -5 | 0 | mA | 56 | ||
| Injected current on TC and RST pin | IINJ(PIN) | -5 | 5 | mA | 56 | ||
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | 56 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 56 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 | |||
| Internal AHB clock frequency | fHCLK | 0 | 72 | MHz | 57 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 36 | MHz | 57 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 72 | MHz | 57 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | Must have a potential equal to or lower than VDDA | 57 | |
| Analog operating voltage (ADC and DAC used) | VDDA | 2.4 | 3.6 | V | Must have a potential equal to or higher than VDD | 57 | |
| Analog operating voltage (ADC and DAC not used) | VDDA | 2 | 3.6 | V | 57 | ||
| VDDSD12 operating voltage (SDADC used) | VDDSD12 | 2.2 | 3.6 | V | Must have a potential equal to or lower than VDDA | 57 | |
| VDDSD12 operating voltage (SDADC not used) | VDDSD12 | 2 | 3.6 | V | 57 | ||
| VDDSD3 operating voltage (SDADC used) | VDDSD3 | 2.2 | 3.6 | V | Must have a potential equal to or lower than VDDA | 57 | |
| VDDSD3 operating voltage (SDADC not used) | VDDSD3 | 2 | 3.6 | V | 57 | ||
| Positive reference voltage (ADC and DAC used) | VREF+ | 2.4 | 3.6 | V | Must have a potential equal to or lower than VDDA | 57 | |
| Positive reference voltage (ADC and DAC not used) | VREF+ | 2 | 3.6 | V | 57 | ||
| SDADCx positive reference voltage | VREFSD+ | 1.1 | 3.6 | V | Must have a potential equal to or lower than any VDDSDx | 57 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 57 | ||
| Input voltage on FT and FTf pins | VIN | 5.5 | V | 57 | |||
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 57 | ||
| Power dissipation (LQFP64) | PD | 444 | mW | TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 | 57 | ||
| Ambient temperature for 6 suffix version | TA | -40 | 85 | °C | Maximum power dissipation | 58 | |
| Ambient temperature for 6 suffix version | TA | -40 | 105 | °C | Low power dissipation | 58 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 58 | ||
| VDD rise time rate | tVDD | 0 | µs/V | 58 | |||
| VDD fall time rate | tVDD | 20 | µs/V | 58 | |||
| Power on/power down reset threshold | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 59 |
| Power on/power down reset threshold | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 59 |
| POR reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 59 | |
| PVD threshold 0 | VPVD0 | 2.1 | 2.18 | 2.26 | V | Rising edge | 59 |
| PVD threshold 0 | VPVD0 | 2 | 2.08 | 2.16 | V | Falling edge | 59 |
| PVD threshold 7 | VPVD7 | 2.76 | 2.88 | 3 | V | Rising edge | 59 |
| PVD threshold 7 | VPVD7 | 2.66 | 2.78 | 2.9 | V | Falling edge | 59 |
| PVD current consumption | IDD(PVD) | 0.15 | 0.26 | µA | 59 | ||
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 60 |
| Internal reference voltage spread over the temperature range | VREFINT_s | 10 | mV | VDD = 3 V ±10 mV | 60 | ||
| Temperature coefficient | TCoeff | 100 | ppm/°C | 60 | |||
| Startup time | tSTART | 10 | µs | 60 | |||
| PVD hysteresis | VPVDhyst | 100 | mV | 59 | |||
| PDR hysteresis | VPDRhyst | 40 | mV | 59 |
CAD (KiCad official)
- Symbol:
STM32F373RCT6TR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32f373rct6tr-etched.step/stm32f373rct6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f373rct6tr.step/stm32f373rct6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (137 pp, sha256
fd00ebf096b21764, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).