component
HT8072ARZ
Public Made by Adomby adom
HTCSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT8072ARZ
HTCSEMI · Operational Amplifier · SOP-8
HT8072ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of amplifier 1, which is current limited and protected from a direct short to ground. |
| 2 | Inputs 1 - | input | Inverting input of amplifier 1; ESD diodes/clamps provide input protection and the common mode input range extends to VEE (ground). |
| 3 | Inputs 1 + | input | Non-inverting input of amplifier 1; the common mode input voltage range includes ground (VEE), so single-supply operation down to 3.0 V is feasible. |
| 4 | VEE/GND | power_in | Negative supply (ground in single-supply operation); the common mode input range includes this potential. |
| 5 | Inputs 2 + | input | Non-inverting input of amplifier 2; the common mode input voltage range includes ground (VEE). |
| 6 | Inputs 2 - | input | Inverting input of amplifier 2; ESD diodes/clamps provide input protection. |
| 7 | Output 2 | output | Output of amplifier 2, which is current limited and protected from a direct short to ground. |
| 8 | VCC | power_in | Positive supply; single supply range is 3.0 V to 36 V (VCC+ |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (VCC=+15 V, VEE=-15 V, TA=+25C) | VIO | 0.5 | 3 | mV | RS = 100 W, VCM = 0 V, VO = 0 V; VCC = +15 V, VEE = −15 V, TA = +25C | 3 | |
| Input Offset Voltage (VCC=+5.0 V, VEE=0 V, TA=+25C) | VIO | 0.5 | 3 | mV | RS = 100 W, VCM = 0 V, VO = 0 V; VCC = +5.0 V, VEE = 0 V, TA = +25C | 3 | |
| Input Offset Voltage (over temperature) | VIO | 5 | mV | RS = 100 W, VCM = 0 V, VO = 0 V; VCC = +15 V, VEE = −15 V, TA = Tlow to Thigh | 3 | ||
| Input Bias Current (TA=+25C) | IIB | 100 | 500 | nA | VCM = 0 V, VO = 0 V, TA = +25C | 3 | |
| Input Bias Current (over temperature) | IIB | 700 | nA | VCM = 0 V, VO = 0 V, TA = Tlow to Thigh | 3 | ||
| Input Offset Current (TA=+25C) | IIO | 6 | 50 | nA | VCM = 0 V, VO = 0 V, TA = +25C | 3 | |
| Input Offset Current (over temperature) | IIO | 300 | nA | VCM = 0 V, VO = 0 V, TA = Tlow to Thigh | 3 | ||
| Large Signal Voltage Gain (TA=+25C) | AVOL | 50 | 100 | V/mV | VO = 10 V, RL = 2.0 kW, TA = +25C | 3 | |
| Large Signal Voltage Gain (over temperature) | AVOL | 25 | V/mV | VO = 10 V, RL = 2.0 kW, TA = Tlow to Thigh | 3 | ||
| Output Voltage High (VCC=+5.0 V, VEE=0 V) | VOH | 3.7 | 4 | V | VCC = +5.0 V, VEE = 0 V, RL = 2.0 kW, TA = +25C | 3 | |
| Output Voltage High (VCC=+15 V, VEE=-15 V, RL=10 kW) | VOH | 13.6 | 14 | V | VCC = +15 V, VEE = −15 V, RL = 10 kW, TA = +25C | 3 | |
| Output Voltage High (VCC=+15 V, VEE=-15 V, RL=2.0 kW, over temperature) | VOH | 13.4 | V | VCC = +15 V, VEE = −15 V, RL = 2.0 kW, TA = Tlow to Thigh | 3 | ||
| Output Voltage Low (VCC=+5.0 V, VEE=0 V) | VOL | 0.1 | 0.3 | V | VCC = +5.0 V, VEE = 0 V, RL = 2.0 kW, TA = +25C | 3 | |
| Output Voltage Low (VCC=+15 V, VEE=-15 V, RL=10 kW) | VOL | -14.7 | -14.3 | V | VCC = +15 V, VEE = −15 V, RL = 10 kW, TA = +25C | 3 | |
| Output Voltage Low (VCC=+15 V, VEE=-15 V, RL=2.0 kW, over temperature) | VOL | -13.5 | V | VCC = +15 V, VEE = −15 V, RL = 2.0 kW, TA = Tlow to Thigh | 3 | ||
| Output Short Circuit Current, Source | ISC | 10 | 30 | mA | VID = 1.0 V, VO = 0 V, TA = 25C | 3 | |
| Output Short Circuit Current, Sink | ISC | 20 | 30 | mA | VID = 1.0 V, VO = 0 V, TA = 25C | 3 | |
| Common Mode Rejection | CMR | 80 | 97 | dB | RS ≤ 10 kW, VCM = VICR, TA = 25C | 3 | |
| Power Supply Rejection | PSR | 80 | 97 | dB | RS = 100 W, VCC/VEE = +16.5 V/−16.5 V to +13.5 V/−13.5 V, TA = 25C | 3 | |
| Power Supply Current (Per Amplifier, VCC=+5.0 V, VEE=0 V) | ID | 1.6 | 2 | mA | VCC = +5.0 V, VEE = 0 V, VO = +2.5 V, TA = +25C | 3 | |
| Power Supply Current (Per Amplifier, VCC=+15 V, VEE=-15 V, TA=+25C) | ID | 1.9 | 2.5 | mA | VCC = +15 V, VEE = −15 V, VO = 0 V, TA = +25C | 3 | |
| Power Supply Current (Per Amplifier, over temperature) | ID | 2.8 | mA | VCC = +15 V, VEE = −15 V, VO = 0 V, TA = Tlow to Thigh | 3 | ||
| Slew Rate (AV = +1.0) | SR | 8 | 10 | V/ms | Vin = −10 V to +10 V, RL = 2.0 kW, CL = 500 pF, AV = +1.0 | 4 | |
| Gain Bandwidth Product | GBW | 3.5 | 4.5 | MHz | f = 100 kHz | 4 | |
| Channel Separation | 120 | dB | f = 10 kHz | 4 | |||
| Supply Voltage (from VEE to VCC) | VS | 36 | V | Supply voltage from VEE to VCC | 2 | ||
| Operating Junction Temperature | TJ | 150 | C | 2 | |||
| Storage Temperature Range | Tstg | -60 | 150 | C | 2 | ||
| ESD Capability, Human Body Model (Dual and Quad) | HBM | 2000 | V | Dual and Quad (Note 3), Human Body Model | 2 | ||
| ESD Capability, Machine Model (Dual and Quad) | ESDMM | 200 | V | Dual and Quad (Note 3), Machine Model | 2 | ||
| Supply Voltage (single supply operation) | 3 | 36 | V | Single supply; split supplies VCC+/VEE/ ≤ 36 V | 1 | ||
| Operating Ambient Temperature (all packages) | TA | -40 | 85 | C | Ordering information: TA = -40 to 85C for all packages | 1 |
CAD (KiCad official)
- Symbol:
HT8072ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht8072arz-etched.step/ht8072arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht8072arz.step/ht8072arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (19 pp, sha256
a5ce6b1baed47a0c, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).