3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC24FJ128GA702-I/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC24FJ128GA702-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGD1/AN2/CTCMP/C2INB/RP0/RB0 | bidirectional | ICSP data PGD1 also serves as analog input AN2 and remappable RP0/RB0; PORTB[0] tolerates only VDD input levels. |
| 2 | PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1 | input | ICSP clock PGC1 also serves as analog input AN3 and remappable RP1/RB1; PORTB[1] tolerates only VDD input levels. |
| 3 | AN4/C1INB/RP2/SDA2/CTED13/RB2 | bidirectional | Analog input AN4 with comparator 1 input B, remappable RP2 and I2C2 SDA2 on RB2; PORTB[2] tolerates only VDD input levels. |
| 4 | AN5/C1INA/RP3/SCL2/CTED8/RB3 | bidirectional | Analog input AN5 with comparator 1 input A, remappable RP3 and I2C2 SCL2 on RB3; PORTB[3] tolerates only VDD input levels. |
| 5 | Vss | power_in | Ground reference for peripheral digital logic and I/O pins. |
| 6 | OSCI/CLKI/C1IND/RA2 | input | Main oscillator input OSCI/CLKI, also comparator 1 input D and RA2; PORTA[2] tolerates 5.5V. |
| 7 | OSCO/CLKO/C2IND/RA3 | output | Main oscillator output OSCO/CLKO, also comparator 2 input D and RA3; CLKO provides the system clock output. |
| 8 | SOSCI/RP4/RB4 | input | Secondary oscillator input SOSCI, remappable RP4 and RB4; PORTB[4] tolerates only VDD input levels. |
| 9 | SOSCO/PWRLCLK/RA4 | output | Secondary oscillator output SOSCO, with real-time clock 50/60 Hz input PWRLCLK on RA4; PORTA[4] tolerates 5.5V. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; the supply range is 2.0V to 3.6V. |
| 11 | PGD3/RP5/ASDA1/OCM1E/RB5 | bidirectional | ICSP data PGD3 with remappable RP5, alternate I2C1 ASDA1 and MCCP1 output OCM1E on RB5; PORTB[5] tolerates 5.5V. |
| 12 | PGC3/RP6/ASCL1/OCM1F/RB6 | input | ICSP clock PGC3 with remappable RP6, alternate I2C1 ASCL1 and MCCP1 output OCM1F on RB6; PORTB[6] tolerates 5.5V. |
| 13 | RP7/OCM1A/CTED3/INT0/RB7 | bidirectional | Remappable RP7 with MCCP1 output OCM1A, CTMU edge input and external interrupt INT0 on RB7; PORTB[7] tolerates 5.5V. |
| 14 | TCK/RP8/SCL1/OCM1B/CTED10/RB8 | input | JTAG test clock TCK with remappable RP8, I2C1 SCL1 and MCCP1 output OCM1B on RB8; PORTB[8] tolerates 5.5V. |
| 15 | TDO/C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/RB9 | output | JTAG test data output TDO with comparator inputs, tamper input TMPRN, remappable RP9, I2C1 SDA1 and Timer1 clock T1CK on RB9; PORTB[9] tolerates only VDD input levels. |
| 16 | Vss | power_in | Ground reference for peripheral digital logic and I/O pins. |
| 17 | VCAP | passive | External filter capacitor connection for the on-chip voltage regulator: requires a low-ESR (<5 Ω) 10 µF capacitor to ground and must not be connected to VDD. |
| 18 | PGD2/TDI/RP10/OCM1C/CTED11/RB10 | bidirectional | ICSP data PGD2 with JTAG test data input TDI, remappable RP10, MCCP1 output OCM1C and RB10; PORTB[10] tolerates 5.5V. |
| 19 | PGC2/TMS/REFI1/RP11/CTED9/RB11 | input | ICSP clock PGC2 with JTAG test mode select TMS, reference clock input REFI1, remappable RP11 and RB11; PORTB[11] tolerates 5.5V. |
| 20 | AN8/LVDIN/RP12/RB12 | bidirectional | Analog input AN8 with high/low-voltage detect input LVDIN, remappable RP12 and RB12; PORTB[12] tolerates only VDD input levels. |
| 21 | AN7/C1INC/RP13/OCM1D/CTPLS/RB13 | bidirectional | Analog input AN7 with comparator 1 input C, remappable RP13, MCCP1 output OCM1D and CTMU pulse output CTPLS on RB13; PORTB[13] tolerates only VDD input levels. |
| 22 | CVREF/AN6/C3INB/RP14/CTED5/RB14 | bidirectional | Comparator voltage reference output CVREF with analog input AN6, remappable RP14 and RB14; PORTB[14] tolerates only VDD input levels. |
| 23 | AN9/C3INA/RP15/CTED6/RB15 | bidirectional | Analog input AN9 with comparator 3 input A, remappable RP15 and RB15; PORTB[15] tolerates only VDD input levels. |
| 24 | AVSS/VSS | power_in | Ground reference for analog modules; must always be connected regardless of whether analog features are used. |
| 25 | AVDD/VDD | power_in | Positive supply for analog modules; must always be connected regardless of whether analog features are used. |
| 26 | MCLR | input | Master Clear input (ST); pulling this pin low causes a device Reset. |
| 27 | VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0 | power_in | Comparator and A/D positive reference input VREF+ with analog input AN0, remappable RP26 and RA0; PORTA[0] tolerates 5.5V. |
| 28 | VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1 | power_in | Comparator and A/D negative reference input VREF- with analog input AN1, remappable RP27 and RA1; PORTA[1] tolerates 5.5V. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Port Output Rise Time | TIOR | 10 | 25 | ns | 370 | ||
| Port Output Fall Time | TIOF | 10 | 25 | ns | 370 | ||
| INTx Pin High or Low Time (input) | TINP | 1 | TCY | 370 | |||
| CNx High or Low Time (input) | TRBP | 1 | TCY | 370 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 353 | ||
| Voltage on 5.5V tolerant pin with respect to VSS | -0.3 | 4 | V | When VDD = 0V | 353 | ||
| Voltage on 5.5V tolerant pin with respect to VSS | -0.3 | 6 | V | When VDD >= 2.0V | 353 | ||
| Ambient temperature under bias | TA | -40 | 125 | °C | 353 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 353 | ||
| Maximum current out of VSS pin | 300 | mA | 353 | ||||
| Supply voltage (Standard Operating Conditions) | 2 | 3.6 | V | Standard Operating Conditions, unless otherwise stated | 370 | ||
| Operating ambient temperature (Industrial) | TA | -40 | 85 | °C | Industrial | 370 | |
| Operating ambient temperature (Extended) | TA | -40 | 125 | °C | Extended | 370 |
CAD (KiCad official)
- Symbol:
PIC24FJ128GA702-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic24fj128ga702-i-etched.step/pic24fj128ga702-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj128ga702-i.step/pic24fj128ga702-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (424 pp, sha256
0a5f346806df1dc3, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC24FJ128GA702-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC24FJ128GA702-I/MV