3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF3433QDBVRQ1
Texas Instruments · Voltage Reference · SOT-23-6
REF3433QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_F | power_in | Ground force connection; connect directly to application ground to form Kelvin sensing pair for minimizing IR drops on ground traces. |
| 2 | GND_S | power_in | Ground sense connection; provides feedback of actual ground potential to internal regulator for Kelvin sensing compensation of PCB trace losses. |
| 3 | EN | input | Enable input; apply ≥1.6V for normal operation or ≤0.5V for shutdown mode consuming 3µA maximum. |
| 4 | IN | power_in | Input power supply voltage; supply between VOUT+VDO (50mV minimum dropout at 0mA load) and 12V maximum. |
| 5 | OUT_S | output | Reference output sense connection; part of Kelvin output sensing pair providing feedback to internal regulator for load regulation. |
| 6 | OUT_F | output | Reference output force connection; provides 3.3V nominal output with ±10mA current capability and 72µA to 95µA quiescent current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | IN | -0.3 | 13 | V | 5 | ||
| Enable voltage | EN | -0.3 | V | max printed as IN + 0.3 | 5 | ||
| Output voltage | VOUT | -0.3 | 5.5 | V | 5 | ||
| Output short-circuit current | 20 | mA | 5 | ||||
| Operating temperature range | TA | -55 | 150 | °C | 5 | ||
| Storage temperature range | Tstg | -65 | 170 | °C | 5 | ||
| Input voltage | IN | 12 | V | min printed as VOUT + VDO | 5 | ||
| Enable voltage | EN | 0 | V | max printed as IN | 5 | ||
| Output current | IL | -10 | 10 | mA | 5 | ||
| Operating temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Output voltage accuracy | -0.05 | 0.05 | % | TA = 25°C | 6 | ||
| Output voltage temperature coefficient | 2.5 | 6 | ppm/℃ | 6 | |||
| Line regulation | ΔVO/ΔVIN | 2 | 15 | ppm/V | VIN = VOUT + VDO (2) 至 12V | 6 | |
| Load regulation, sourcing | ΔVO/ΔIL | 20 | 30 | ppm/mA | IL = 0mA 至 10mA,VIN = VOUT+ VDO (3) | 6 | |
| Load regulation, sinking (REF3433-Q1) | ΔVO/ΔIL | 48 | 84 | ppm/mA | IL = 0mA 至 -10mA,VIN = VOUT+ VDO (3) | 6 | |
| Low-frequency noise, peak-to-peak (REF3433-Q1) | enp-p | 5 | µV p–p/V | 0.1Hz ≤ f ≤ 10Hz | 6 | ||
| Integrated wideband noise | en | 24 | µVrms | 10Hz ≤ f ≤ 10kHz | 6 | ||
| Output voltage noise density | en | 0.25 | ppm/√Hz | f = 1kHz | 6 | ||
| Stable output capacitor range | CL | 0.1 | 10 | µF | 6 | ||
| Input voltage | VIN | 12 | V | min printed as VOUT + VDO | 7 | ||
| Output current capability | IL | -10 | 10 | mA | VIN = VOUT + VDO 至 12V | 7 | |
| Quiescent current, operating mode | IQ | 72 | 95 | µA | 工作模式 | 7 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 3 | µA | 关断模式(7) | 7 | |
| Dropout voltage | VDO | 100 | mV | IL = 0mA | 7 | ||
| Dropout voltage | VDO | 50 | mV | IL = 0mA | 7 | ||
| Dropout voltage | VDO | 500 | mV | IL = 10mA | 7 | ||
| Enable pin voltage, reference on (operating mode) | VEN | 1.6 | V | 工作模式下的电压基准 (EN = 1) | 7 | ||
| Enable pin voltage, reference off (shutdown mode) | VEN | 0.5 | V | 关断模式下的电压基准 (EN = 0) | 7 | ||
| Enable pin leakage current | IEN | 1 | 2 | µA | VEN = VIN = 12V | 7 | |
| Short-circuit current | ISC | 18 | 22 | mA | TA = 25°C 时 VOUT = 0V | 7 | |
| Output voltage (REF3433Q1) | VOUT | 3.3 | V | REF3433Q1 | 7 | ||
| Long-term stability, DBV package | 25 | ppm | 35℃ 时为 0h 至 1000h | 6 | |||
| Long-term stability, DBV package | 10 | ppm | 35℃ 时为 1000h 至 2000h | 6 | |||
| Output voltage thermal hysteresis, DBV package | 30 | ppm | 25°C、–40°C、125°C、25°C 周期 1 | 6 | |||
| Output voltage thermal hysteresis, DBV package | 10 | ppm | 25°C、–40°C、125°C、25°C 周期 2 | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 122.6 | °C/W | DBV 6-pin package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 80.2 | °C/W | DBV 6-pin package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 42 | °C/W | DBV 6-pin package | 5 | ||
| Junction-to-top characterization parameter | ΨJT | 23.2 | °C/W | DBV 6-pin package | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 41.9 | °C/W | DBV 6-pin package | 5 |
CAD (KiCad official)
- Symbol:
REF3433QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ref3433qdbvrq1-etched.step/ref3433qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref3433qdbvrq1.step/ref3433qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
addb0b3508cd0c2e, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).