component
SP6201EM5-L-3-3
Public Made by Adomby adom
MaxLinear Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSP6201EM5-L-3-3
MaxLinear · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SP6201EM5-L-3-3 from MaxLinear, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input, specified for +2.5V to +6V operation (absolute maximum -2V to 7V), with a 1µF or higher ceramic or tantalum bypass capacitor from VIN to GND. |
| 2 | GND | power_in | Ground terminal; the ground pin current is the regulator quiescent current, typically 28µA at a 100µA load. |
| 3 | EN | input | CMOS/TTL-compatible enable input where logic high enables and logic low shuts down the regulator, with VIL maximum 0.4V, VIH minimum 1.6V, and absolute maximum rating of -2V to 7V. |
| 4 | RST | output | On the fixed-voltage version this is an open-drain reset-not (VOUT good) output that indicates VOUT is in regulation, asserting when VOUT is about 4% below nominal with 1% hysteresis. |
| 5 | OUT | power_out | Regulator output voltage (VOUT), which needs an output capacitor of at least 1µF ceramic for stability with ESR below 5Ω. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | (VO) | -2 | 2 | % | Variation from specified VOUT | 2 | |
| Output Voltage Accuracy | (VO) | -3 | 3 | % | Over operating junction temperature range (•) | 2 | |
| Line Regulation | (ΔVO/VIN) | 0.03 | 0.2 | %/V | VIN = (VOUT + 1V) to 6V; • over operating junction temperature range | 2 | |
| Load Regulation | (ΔVO/VO) | 0.14 | % | IL = 0.1mA to 200mA, SP6201 | 2 | ||
| Load Regulation | (ΔVO/VO) | 0.5 | % | IL = 0.1mA to 200mA, SP6201; • over operating junction temperature range | 2 | ||
| Dropout Voltage | (VIN, VO) | 0.2 | 4 | mV | IL = 100µA | 2 | |
| Dropout Voltage | (VIN, VO) | 7 | mV | IL = 100µA; • over operating junction temperature range | 2 | ||
| Dropout Voltage | (VIN, VO) | 70 | 120 | mV | IL = 50mA | 2 | |
| Dropout Voltage | (VIN, VO) | 160 | mV | IL = 50mA; • over operating junction temperature range | 2 | ||
| Dropout Voltage | (VIN, VO) | 160 | 250 | mV | IL = 100mA | 2 | |
| Dropout Voltage | (VIN, VO) | 300 | mV | IL = 100mA; • over operating junction temperature range | 2 | ||
| Dropout Voltage | (VIN, VO) | 320 | 400 | mV | IL = 200mA, SP6201 Only | 2 | |
| Dropout Voltage | (VIN, VO) | 500 | mV | IL = 200mA, SP6201 Only; • over operating junction temperature range | 2 | ||
| Shutdown Quiescent Current | (IGND) | 0.01 | 1 | µA | VEN ≥ 0.4V; • over operating junction temperature range | 2 | |
| Ground Pin Current | (IGND) | 28 | 40 | µA | VEN ≥ 2.0V, IL = 100 µA | 2 | |
| Ground Pin Current | (IGND) | 45 | µA | • over operating junction temperature range | 2 | ||
| Ground Pin Current | (IGND) | 200 | 400 | µA | VEN ≥ 2.0V, IL = 200mA, SP6201 Only | 2 | |
| Power Supply Rejection Ratio | (PSRR) | 78 | dB | Frequency = 100Hz, IL = 10mA | 2 | ||
| Power Supply Rejection Ratio | (PSRR) | 40 | dB | Frequency = 400Hz, IL = 10mA | 2 | ||
| Current Limit | (ICL) | 300 | 420 | 600 | mA | • SP6201 | 3 |
| Enable Input Logic-Low Voltage | (VIL) | 0.4 | V | • Regulator Shutdown | 3 | ||
| Enable Input Logic-High Voltage | (VIH) | 1.6 | V | • Regulator Enabled | 3 | ||
| Enable Input Current | (IIL) | 0.01 | 1 | µA | VIL < 0.4V; • over operating junction temperature range | 3 | |
| Reset Not Output threshold | -2 | -4 | -6 | % | Threshold | 3 | |
| Thermal Limit turns on | 162 | °C | Turns On | 3 | |||
| Thermal Limit turns off | 147 | °C | Turns Off | 3 | |||
| Thermal Regulation | (ΔVO/ΔPD) | 0.05 | %/W | 3 | |||
| Output Noise | (eNO) | 150 | µVrms | IL = 50mA, CL = 1µF; 0.1µF from VOUT to Adj.; 10Hz to 100kHz | 3 | ||
| Output Voltage Temperature Coefficient | (ΔVO/ΔT) | 60 | ppm/°C | 2 | |||
| Supply Input Voltage | VIN | -2 | 7 | V | 2 | ||
| Output Voltage | VOUT | -0.6 | V | Maximum is (VIN + 1V) as printed | 2 | ||
| Enable Input Voltage | VEN | -2 | 7 | V | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Lead Temperature | 260 | °C | Soldering, 5 sec | 2 | |||
| Input Voltage Range | VIN | 2.5 | 6 | V | 2 | ||
| Enable Input Voltage | VEN | 0 | 6 | V | 2 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 |
CAD (KiCad official)
- Symbol:
SP6201EM5-L-3-3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sp6201em5-l-3-3-etched.step/sp6201em5-l-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp6201em5-l-3-3.step/sp6201em5-l-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (17 pp, sha256
6f7df995243e9eab, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).