Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

LM386MX-1

Texas Instruments · Audio Amplifiers · SOIC-8-150mil

LM386MX-1 from Texas Instruments, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GAIN passive Gain setting pin; connect resistor and capacitor to pin 8 to adjust voltage gain from 20 to 200.
2 -INPUT input Inverting input; 50 kΩ input impedance; 250 nA input bias current.
3 +INPUT input Noninverting input; 50 kΩ input impedance; 250 nA input bias current.
4 GND power_in Ground reference.
5 VOUT output Audio output; output biased to approximately VS/2; can drive 4 Ω to 32 Ω loads.
6 VS power_in Power supply voltage; operating range 4 V to 12 V; bypass to ground recommended.
7 BYPASS output Bypass decoupling path; connect capacitor to ground for ripple reduction.
8 GAIN passive Gain setting pin; connect resistor and capacitor to pin 1 to adjust voltage gain from 20 to 200.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8-150mil
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: LM386MX-1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 0fbdb3de058ef6b0, retrieved 2026-09-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF