3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUSB-A3-S-RA
Adam Tech · Connectors, Interconnects · Unknown
USB-A3-S-RA from Adam Tech, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBUS | power_in | VBUS (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 2 | D- | bidirectional | D- (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 3 | D+ | bidirectional | D+ (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 4 | GND | power_in | GND (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 5 | SSRX- | input | SSRX- (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 6 | SSRX+ | input | SSRX+ (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 7 | GND_DRAIN | power_in | GND_DRAIN (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 8 | SSTX- | output | SSTX- (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| 9 | SSTX+ | output | SSTX+ (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table) |
| SH | SHELL | passive | Shell (brass, nickel plated) mounting legs in the two Ø2.30 holes; connect to chassis/ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Adam Tech |
| Package | Unknown |
| Category | Connectors, Interconnects |
| Pins | 10 |
CAD (Adom-generated)
- Symbol:
USB-A3-S-RA - Footprint:
Adom_Gen:Adam_Tech_USB-A3-S_2a7889 - 3D model: generated to fit the land (STEP)
- 3D model files:
usb-a3-s-ra-etched.step/usb-a3-s-ra-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);usb-a3-s-ra.step/usb-a3-s-ra.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Adam Tech datasheet (1 pp, sha256
93fa9c588d9064a5, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Adam Tech USB-A3-S-RA drawing (rev C, 5/11/26) 'RECOMMENDED PCB LAYOUT' (inch [mm]): pin holes Ø.028 [0.70]; pins 1-4 in one row (1 at the left, 2.50 / 2.00 / 2.50 apart, symmetric about the centre line), pins 5-9 in a row .059 [1.50] behind them at .079 [2.00] pitch with 7 on the centre line, 9 at the left; two shell holes Ø.091 [2.30] .517 [13.14] apart, .079 [2.00] in front of the 1-4 row and .464 [11.78] from the connector (board) edge. Pad diameters are not printed: 1.2 for the Ø0.70 pins and 3.3 for the Ø2.30 shell holes (derived). Body 14.50 wide (.571), 16.45 deep (.648 REF), 7.12 high (.280); front at the connector edge.