3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD5318
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-89-3
MD5318 from Shanghai Mingda Microelectronics, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives an input voltage of 10 V maximum for output regulation (absolute maximum 12 V). |
| 2 | VOUT | power_out | Regulated output pin; VOUT must not be driven more than 0.3 V above VIN, because the parasitic diode between VIN and VOUT can destroy the IC under reverse current, and a 2.2 µF or larger output capacitor to GND is required for stability. |
| 3 | GND | power_in | Ground reference pin; the absolute maximum output voltage range is specified relative to Vss (-0.3 V to VIN+0.3 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 12 | V | 2 | |||
| Power dissipation SOT-89 | PD | 1000 | mW | Ta=25℃ | 2 | ||
| Storage ambient temperature | TSTG | -40 | 125 | ℃ | 3 | ||
| Operating ambient temperature | TOPR | -40 | 85 | ℃ | 3 | ||
| Thermal resistance junction-to-board SOT-89 | RθJB | 100 | ℃/W | Mounted on JEDEC 4-layer (2s2p) PCB test board, footnote (1) | 3 | ||
| Input voltage | VIN | 10 | V | 3 | |||
| Output current | IOUT | 500 | mA | VIN=VOUT+1V | 3 | ||
| Input-output voltage differential (dropout) | VDROP | 800 | 1300 | mV | VOUT=1.8V, IOUT=500mA | 3 | |
| Input stability | ΔVOUT1/ΔVIN*VOUT | 0.15 | 0.3 | %/V | VOUT+1V≤VIN≤10V, IOUT=10mA | 3 | |
| Load stability | ΔVOUT2 | 15 | 30 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 3 | |
| Output voltage temperature coefficient | ΔVOUT/ΔTa*VOUT | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+1V, IOUT=1mA, -40℃≤Ta≤125℃ | 3 |
| Quiescent current | ISS1 | 1.2 | 2.5 | uA | VIN=10V, no load | 3 | |
| Output short-circuit current | ISHORT | 50 | 70 | mA | VOUT=0V | 3 | |
| Power supply ripple rejection ratio | PSRR | 40 | dB | f=100Hz, IOUT=10mA | 3 | ||
| Power supply ripple rejection ratio | PSRR | 20 | dB | f=1kHz, IOUT=10mA | 3 | ||
| Input capacitor | CIN | 1 | µF | Input capacitor, 1.0 µF or more | 8 | ||
| Output capacitor | COUT | 2.2 | µF | Tantalum, 2.2 µF or more; aluminum electrolytic requires 10.0 µF or more | 8 | ||
| Output capacitor ESR range | ESR | 0.5 | 5 | Ω | Appropriate ESR range for stable operation | 11 |
CAD (KiCad official)
- Symbol:
MD5318 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
md5318-etched.step/md5318-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md5318.step/md5318.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (16 pp, sha256
54cbb58cd55dcd8d, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).