MCP6001UT-I from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VIN+	input	Non-inverting analog input. High-impedance CMOS input with typ. ±1 pA bias current; common-mode range extends from VSS − 0.3 V to VDD + 0.3 V (rail-to-rail input).
2	VSS	power_in	Negative power supply / ground. Typically tied to GND in single-supply operation. VDD − VSS must be between 1.8 V and 5.5 V (absolute max 7.0 V).
3	VIN-	input	Inverting analog input. High-impedance CMOS input with typ. ±1 pA bias current; rail-to-rail common-mode range (VSS − 0.3 V to VDD + 0.3 V).
4	VOUT	output	Analog output. Low-impedance rail-to-rail output; swings to within ~25 mV of either supply rail with 10 kΩ load. Short-circuit current ±6 mA (VDD = 1.8 V) to ±23 mA (VDD = 5.5 V).
5	VDD	power_in	Positive power supply, 1.8 V to 5.5 V (absolute max 7.0 V above VSS). Requires a 0.01-0.1 µF local bypass capacitor within 2 mm of the pin, plus a bulk 1 µF (or larger) capacitor within 100 mm.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

Same part, different packaging or reel option.

MCP6001UT-I/OT
MCP6001UT-E/OT
MCP6001RT-I/OT
MCP6001RT-E/OT
MCP6001T-I/LT
MCP6001T-E/LT
MCP6002-I/P
MCP6002-I/SN
MCP6002-I/MS
MCP6004-I/P
MCP6004-I/SL
MCP6004-I/ST

CAD (KiCad official)

Symbol: MCP6001UT-I
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp6001ut-i.step`	85 KB	You want the bare part, or you mark your own boards.
`mcp6001ut-i-etched.step`	1.9 MB	You want the part with `MCP6001UT-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 477 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (28 pp, sha256 085cea140a8887b9, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF