component
AT24C08D-PUM-TUDI
Public Made by Adomby adom
Tudi EEPROM, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAT24C08D-PUM-TUDI
Tudi · EEPROM · DIP-8
AT24C08D-PUM-TUDI from Tudi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input that must be hard-wired; on the 8K (AT24C08) device A1 and A0 are no connect, so this pin has no function there. |
| 2 | A1 | input | Device address input that must be hard-wired; on the 8K (AT24C08) device this pin is no connect. |
| 3 | A2 | input | Device address input hard-wired to match the device address; on the 8K (AT24C08) device it is the only device address bit used. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Bidirectional open-drain serial data pin that may be wire-ORed with other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input; data is clocked into the device on the positive edge and out of the device on the negative edge. |
| 7 | WP | input | Write Protect: tie to GND for normal read/write operation; tie to VCC to enable write protection of the full array. |
| 8 | VCC | power_in | Power supply, 1.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tudi |
| Package | DIP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | -0.3 | 6.5 | V | 10 | |||
| Input / Output Voltage | -0.3 | V | min referenced to GND (GND-0.3V); max printed as VCC+0.3V | 10 | |||
| Operating Ambient Temperature | -40 | 85 | °C | 10 | |||
| Storage Temperature | -65 | 150 | °C | 10 | |||
| Electrostatic pulse (Human Body model) | 8000 | V | Human Body model | 10 | |||
| Operating ambient temperature (recommended range) | TA | -40 | 85 | °C | 10 | ||
| Supply voltage (recommended range) | VCC | 1.7 | 5.5 | V | 10 | ||
| Output Low Level | VOL2 | 0.4 | V | VCC=5.0V, IOL=3.0mA | 10 | ||
| Output Low Level | VOL1 | 0.2 | V | VCC=1.7V, =0.15mA | 10 | ||
| Input High Level | VIH1 | 0.7 | ×VCC | min 0.7×VCC; max printed as VCC+0.3V; VCC=1.7V to 5.5V | 10 | ||
| Input Low Level (min) | VIL1 | -0.3 | V | VCC=1.7V to 5.5V | 10 | ||
| Input Low Level (max) | VIL1 | 0.3 | ×VCC | VCC=1.7V to 5.5V | 10 | ||
| Output Leakage Current | ILO | 0.05 | 1 | µA | VOUT=VCC or V | 10 | |
| Input Leakage Current | ILI | 0.1 | 1 | µA | VIN=VCC or V | 10 | |
| Supply Current (standby) | SB1 | 0.03 | 0.5 | µA | VCC=5.0V | 10 | |
| Supply Current (WRITE at 400kHz) | CC2 | 0.28 | 0.5 | mA | VCC=5.0V, WRITE at 400KHZ | 10 | |
| Supply Current (READ at 400kHz) | CC1 | 0.14 | 0.3 | mA | VCC=5.0V, READ at 400KHZ | 10 | |
| Supply Voltage (write) | CC2 | 2.5 | 5.5 | V | 10 | ||
| Supply Voltage (read) | CC1 | 1.7 | 5.5 | V | 10 | ||
| Input Capacitance (A0,A1,A2,SCL) | CIN | 6 | pF | VIN=0V | 10 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | =0V | 10 | ||
| Clock Frequency, SCL | fSCL | 400 | kHz | 1.7V≤VCC<2.5V | 11 | ||
| Clock Frequency, SCL | fSCL | 1000 | kHz | 2.5V≤VCC<5.5V | 11 | ||
| Clock Low to Data Out Valid | tAA | 0.1 | 0.55 | µs | 1.7V≤VCC<2.5V | 11 | |
| Data Out Hold Time | tDH | 50 | ns | 1.7V≤VCC<2.5V | 11 | ||
| Stop Setup Time | Su:STO | 0.25 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Input Fall Time (1) | tF | 0.3 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Input Rise Time (1) | tR | 0.3 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Data in Setup Time | tSU.DAT | 100 | ns | 1.7V≤VCC<2.5V | 11 | ||
| Data In Hold Time | tHD.DAT | 0 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Start Setup Time | SU:DAT | 0.25 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Start Hold Time | HD:STA | 0.25 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Time the bus must be free before a new transmission can start | tBUF | 0.5 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Noise Suppression Time | I | 50 | ns | 1.7V≤VCC<2.5V | 11 | ||
| Clock Pulse Width High | tHIGH | 0.4 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Clock Pulse Width Low | tLOW | 0.6 | µs | 1.7V≤VCC<2.5V | 11 | ||
| Write Cycle Time | tWR | 1.9 | 3 | ms | 1.7V≤VCC<2.5V | 11 | |
| Endurance (Byte Mode) | 1 | Mcycles | 5.0V, 25℃, Byte Mode | 11 |
CAD (KiCad official)
- Symbol:
AT24C08D-PUM-TUDI - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
at24c08d-pum-tudi-etched.step/at24c08d-pum-tudi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c08d-pum-tudi.step/at24c08d-pum-tudi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tudi datasheet (18 pp, sha256
4c16636c4866f117, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).