3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTT0512TLX
Shenzhen JingYang · ESD And Surge Protection (TVS/ESD) · SOT-23-6L
TT0512TLX from Shenzhen JingYang, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I/O | bidirectional | ESD/transient protected data line I/O, rated for IEC 61000-4-2 ±25kV air and ±17kV contact discharge, with 0.5 pF typical I/O-to-I/O capacitance. |
| 2 | GND | power_in | Negative reference pin that must connect to PCB ground, with connection wires kept as short as possible to minimize parasitic inductance. |
| 3 | I/O | bidirectional | ESD/transient protected data line I/O, rated for IEC 61000-4-2 ±25kV air and ±17kV contact discharge, with 0.5 pF typical I/O-to-I/O capacitance. |
| 4 | I/O | bidirectional | ESD/transient protected data line I/O, rated for IEC 61000-4-2 ±25kV air and ±17kV contact discharge, with 0.5 pF typical I/O-to-I/O capacitance. |
| 5 | GND | power_in | Negative reference pin that must connect to PCB ground, with connection wires kept as short as possible to minimize parasitic inductance. |
| 6 | I/O | bidirectional | ESD/transient protected data line I/O, rated for IEC 61000-4-2 ±25kV air and ±17kV contact discharge, with 0.5 pF typical I/O-to-I/O capacitance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT-23-6L |
| Category | Circuit Protection |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ESD per IEC 61000-4-2 (Air) | VESD | -25 | 25 | kV | ESD per IEC 61000-4-2 (Air) | 2 | |
| ESD per IEC 61000-4-2 (Contact) | VESD | -17 | 17 | kV | ESD per IEC 61000-4-2 (Contact) | 2 | |
| Operating Temperature | TOPT | -55 | 125 | C | 2 | ||
| Storage Temperature | TSTG | -55 | 150 | C | 2 | ||
| Reverse Leakage Current | IR | 0.1 | 1 | μA | VRWM = 5V, T = 25C, between I/O and GND | 2 | |
| Reverse Breakdown Voltage | VBR | 6 | 8 | 10 | V | IT = 1mA, between I/O and GND | 2 |
| Clamping Voltage | VC | 12 | V | IPP = 1A, tp = 8/20μs, between I/O and GND | 2 | ||
| Parasitic Capacitance | CESD | 0.8 | pF | VR = 0V, f = 1MHz, between I/O and GND | 2 | ||
| Parasitic Capacitance | CESD | 0.5 | pF | VR = 0V, f = 1MHz, between I/O and I/O | 2 | ||
| Nominal Reverse Working Voltage | VRWM | 5 | V | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TT0512TLX - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tt0512tlx-etched.step/tt0512tlx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tt0512tlx.step/tt0512tlx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (7 pp, sha256
32eeac12bc2b4cf5, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).