component
SN74HC244QPWREP
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74HC244QPWREP
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
SN74HC244QPWREP from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output enable for the first 4-bit buffer/driver: when low, data passes from the 1A inputs to the 1Y outputs, and when high, the 1Y outputs go to high impedance. |
| 2 | 1A1 | input | Noninverted data input 1 of the first buffer/driver, with input voltage limited to 0 V to VCC. |
| 3 | 2Y4 | tri_state | 3-state output 4 of the second buffer/driver, high impedance when 2OE is high, and rated to drive up to 15 LSTTL loads. |
| 4 | 1A2 | input | Noninverted data input 2 of the first buffer/driver, with input voltage limited to 0 V to VCC. |
| 5 | 2Y3 | tri_state | 3-state output 3 of the second buffer/driver, high impedance when 2OE is high, and rated to drive up to 15 LSTTL loads. |
| 6 | 1A3 | input | Noninverted data input 3 of the first buffer/driver, with input voltage limited to 0 V to VCC. |
| 7 | 2Y2 | tri_state | 3-state output 2 of the second buffer/driver, high impedance when 2OE is high, and rated to drive up to 15 LSTTL loads. |
| 8 | 1A4 | input | Noninverted data input 4 of the first buffer/driver, with input voltage limited to 0 V to VCC. |
| 9 | 2Y1 | tri_state | 3-state output 1 of the second buffer/driver, high impedance when 2OE is high, and rated to drive up to 15 LSTTL loads. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | 2A1 | input | Noninverted data input 1 of the second buffer/driver, with input voltage limited to 0 V to VCC. |
| 12 | 1Y4 | tri_state | 3-state output 4 of the first buffer/driver, high impedance when 1OE is high, and rated to drive up to 15 LSTTL loads. |
| 13 | 2A2 | input | Noninverted data input 2 of the second buffer/driver, with input voltage limited to 0 V to VCC. |
| 14 | 1Y3 | tri_state | 3-state output 3 of the first buffer/driver, high impedance when 1OE is high, and rated to drive up to 15 LSTTL loads. |
| 15 | 2A3 | input | Noninverted data input 3 of the second buffer/driver, with input voltage limited to 0 V to VCC. |
| 16 | 1Y2 | tri_state | 3-state output 2 of the first buffer/driver, high impedance when 1OE is high, and rated to drive up to 15 LSTTL loads. |
| 17 | 2A4 | input | Noninverted data input 4 of the second buffer/driver, with input voltage limited to 0 V to VCC. |
| 18 | 1Y1 | tri_state | 3-state output 1 of the first buffer/driver, high impedance when 1OE is high, and rated to drive up to 15 LSTTL loads. |
| 19 | 2OE | input | Active-low output enable for the second 4-bit buffer/driver: when low, data passes from the 2A inputs to the 2Y outputs, and when high, the 2Y outputs go to high impedance. |
| 20 | VCC | power_in | Supply voltage, recommended range 2 V to 6 V with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74HC244QPWREP - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74hc244qpwrep-etched.step/sn74hc244qpwrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc244qpwrep.step/sn74hc244qpwrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
e209190dd4fa799c, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).