component

LM393AM

Public Made by Adom

by adom

HGSEMI Comparators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorslm393amfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM393AM

HGSEMI · Comparators · SOP-8

LM393AM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Comparator 1 open-collector output; can be wired-AND with other open-collector outputs, low-level output voltage 150 mV typ at IOL=4mA.
2 IN1- input Comparator 1 inverting input; common-mode range 0 to Vcc-1.5V at 25°C and must not go negative by more than 0.3V.
3 IN1+ input Comparator 1 non-inverting input; common-mode range 0 to Vcc-1.5V at 25°C and may go to 30V without damage.
4 GND power_in Ground; input common-mode range includes GND, and split supplies are also possible.
5 IN2+ input Comparator 2 non-inverting input; common-mode range 0 to Vcc-1.5V at 25°C and may go to 30V without damage.
6 IN2- input Comparator 2 inverting input; common-mode range 0 to Vcc-1.5V at 25°C and must not go negative by more than 0.3V.
7 OUT2 output Comparator 2 open-collector output; can be wired-AND with other open-collector outputs, low-level output voltage 150 mV typ at IOL=4mA.
8 VCC power_in Positive supply; operates over a wide single-supply range with datasheet specs at 5V to 30V and supply current 0.8 mA typ at 5V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 2 5 mV 25℃; Vcc=5V to 30V, VIC=VICRmin, Vo=1.4V 2
Input offset voltage VIO 9 mV Full range; Vcc=5V to 30V, VIC=VICRmin, Vo=1.4V 2
Input offset current IIO 5 50 nA 25℃; Vo=1.4V 2
Input offset current IIO 150 nA Full range; Vo=1.4V 2
Input bias current IIB -25 -250 nA 25℃; Vo=1.4V 2
Input bias current IIB -400 nA Full range; Vo=1.4V 2
Common-mode input voltage range VICR 0 V 25℃; upper limit printed as Vcc-1.5 V 2
Large-signal differential voltage amplification AVD 50 200 V/mV Vcc=15V, Vo=1.4V to 11.4V, RL≥15kΩ to VCC; 25℃ 2
High-level output current IOH 0.1 50 nA VOH=5V, VID=1V; 25℃ 2
High-level output current IOH 1 µA VOH=30V, VID=1V; Full range 2
Low-level output voltage VOL 150 400 mV IOL=4mA, VID=-1V; 25℃ 2
Low-level output voltage VOL 700 mV IOL=4mA, VID=-1V; Full range 2
Low-level output current IOL 6 mA VOL=1.5V, VID=-1V; 25℃ 2
Supply current ICC 0.8 1 mA RL=∞, VCC=5V; 25℃ 2
Supply current ICC 2.5 mA RL=∞, VCC=30V; Full range 2
Response time 1.3 µs VCC=5V, TA=25°C; RL to 5V through 5.1kΩ, CL=15pF; 5-mV overdrive input step 2
Response time 0.3 µs VCC=5V, TA=25°C; RL to 5V through 5.1kΩ, CL=15pF; TTL-level input step 2
Operating free-air temperature range (Full range) TA -40 85 ℃ Full range (MIN to MAX) for LM393A 2
Input voltage below GND VIN -0.3 V Voltage at either input or common-mode should not go negative by more than this 2
Input voltage without damage VIN 30 V Either or both inputs can go to 30V without damage 2

CAD (KiCad official)

  • Symbol: LM393AM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm393am-etched.step / lm393am-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm393am.step / lm393am.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (6 pp, sha256 fed721cb24cf1187, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF