3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME4064DM5G
MICRONE · Battery Management ICs · SOT-23-5
ME4064DM5G from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output that is pulled low by an internal switch while the battery is charging and is high impedance otherwise (absolute maximum -0.3 to 10 V). |
| 2 | GND | power_in | Ground pin, which is also the main thermal path from the die to the PC board copper. |
| 3 | BAT | power_out | Battery connection pin that supplies charge current and regulates 4.2V, with BAT pin current below 2μA in disable or sleep mode. |
| 4 | VCC | power_in | Positive input supply (4.0 to 8.0 V) that powers the internal circuit and enters low-power sleep mode when VCC drops within 80mV of the BAT voltage. |
| 5 | PROG | bidirectional | Charge current programming and monitor pin where a resistor RPROG to GND sets the current, with the pin regulated to 0.1V in precharge and 1V in constant-current mode (IBAT = VPROG/RPROG*1100). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written | 16 | |
| contacts | copper | copper lead frame, through the package leads, (especially the ground lead) to the PC board copper. The PC board | 11 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ME4064DM5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.55 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
me4064dm5g-etched.step/me4064dm5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me4064dm5g.step/me4064dm5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (16 pp, sha256
2ffde19a7828fa2e, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).