component
M93S46-WMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM93S46-WMN6TP
STMicroelectronics · EEPROM · SOP-8
M93S46-WMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select input; low deselects the device and puts Q in high impedance (Standby mode unless a write is in progress), high selects it in Active Power mode. |
| 2 | C | input | Serial clock input that times the interface, latching D on the rising edge, with a maximum clock frequency of 2 MHz. |
| 3 | D | input | Serial data input that receives instructions, addresses and data to be written, latched on the rising edge of C. |
| 4 | Q | tri_state | Serial data output that shifts data out on the rising edge of C, is high impedance when S is low, and gives Ready/Busy status during writes. |
| 5 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 6 | W | input | Write protect input; when held low writes to memory are disabled, and it must be driven high or low and not left floating. |
| 7 | PRE | input | Protection register enable input that must be driven high before and during instructions accessing the Protection Register. |
| 8 | VCC | power_in | Supply voltage of 2.5 V to 5.5 V, to be decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M93S46-WMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
m93s46-wmn6tp-etched.step/m93s46-wmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m93s46-wmn6tp.step/m93s46-wmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (32 pp, sha256
f351bdea984fc360, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).